scholarly journals Study on the Electro-Osmosis Characteristics of Soft Clay from Taizhou with Various Saline Solutions

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yang Shen ◽  
Wen Shi ◽  
Shaoyu Li ◽  
Long Yang ◽  
Jianting Feng ◽  
...  
Keyword(s):  
Pore Water Pressure ◽  
Water Pressure ◽  
Theoretical Perspective ◽  
Soft Clay ◽  
Soil Microstructure ◽  
Mass Fractions ◽  
Electro Osmosis ◽  
Key Factor ◽  
Soil Conductivity ◽  
Saline Solutions

Chemical electro-osmosis with an injected saline solution can be described as an efficient method for adjusting the soil microstructure and improving soil conductivity, and the effect of electro-osmotic consolidation on soft foundations can also be improved by this novel technology in regard to foundation treatment. To better study the electro-osmotic characteristics of soft clay from Taizhou with different grouting solutions, a series of chemical electro-osmotic experiments concerning the injection of CaCl2, MgCl2, NaCl, KCl, and deionized water were conducted in the laboratory based on custom test devices. The actual treatment effects of these experiments were compared by monitoring the drainage, current, voltage, elemental mass fractions in the soil, and soil structure. The chemical electro-osmotic method was further studied from a theoretical perspective based on the inherent link between the macro- and microlevel indexes. The results of the model test indicated that the crystal structure of the soil changed from an initial flocculated structure to a granular or laminated structure with the injection of CaCl2 and MgCl2 saline. Na+ was hereby replaced by multicharged ions, which served as the key factor that affected both the drainage efficiency and conductivity of the electro-osmotic process. Moreover, a novel one-dimensional electro-osmotic consolidation equation was introduced that considered variations in the electro-osmotic permeability coefficient, which better illustrated how the excess pore water pressure was deduced when compared with Esrig’s consolidation equation. Furthermore, the results of this experiment may be adopted as a reference or as evidence for the subsequent promotion and application of the electro-osmosis method.

Laboratory assessment of electro-osmotic stabilization of soft clay

2011 ◽  
Vol 48 (12) ◽  
pp. 1788-1802 ◽  
Author(s):  
V. Jeyakanthan ◽  
C.T. Gnanendran ◽  
S.-C.R. Lo
Keyword(s):  
Pore Water Pressure ◽  
Water Pressure ◽  
Ground Improvement ◽  
Soft Clay ◽  
Initial Stresses ◽  
Triaxial Tests ◽  
Laboratory Assessment ◽  
Chemical Changes ◽  
Soft Clays ◽  
Electro Osmosis

The application of electro-osmosis (EO) for stabilizing soft clays is receiving more attention in geotechnical engineering. When the application of traditional ground improvement techniques, such as surcharge, pre-loading, wick drains, and vacuum pre-loading, is not appropriate for a particular situation, innovative techniques such as electro-osmosis need to be considered. Although the effectiveness of electro-osmosis has been widely demonstrated in many field applications, geotechnical engineers are still hesitant to apply electro-osmosis due to unknown effects such as electro-chemical changes, which could not be accounted for in the design. This paper presents a design of an electro-osmotic triaxial testing apparatus suitable for electro-osmotic treatment of soft clays and for measuring electro-osmotic permeability and generated pore-water pressure, as well as a testing procedure that accounts for the contribution of electro-chemical changes in the improvement of soil properties. A series of electro-osmotic triaxial tests with various initial stresses and boundary conditions were conducted and the results are presented in the paper.

Study on Reinforce Saturated Soft Clay Foundation with Dynamic Consolidation by Drainage

2013 ◽  
Vol 438-439 ◽  
pp. 1171-1175
Author(s):  
Zhi Li Sui ◽  
Zhao Guang Li ◽  
Xu Peng Wang ◽  
Wen Li Li ◽  
Tie Jun Xu
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Clay ◽  
Soil Layer ◽  
Good Effect ◽  
Loading Test ◽  
Test Plate ◽  
Dynamic Consolidation ◽  
Saturated Soft Clay

Dynamic consolidation method has been widely used in improving soft land, but always inefficient to saturated soft clay land, which is hard to improve, and even leads to rubber soil. Dynamic and drain consolidation method will deal with it well, with drainage system, pore-water can be expelled instantly from saturated soft clay as impacting. The pore-water pressure and earth pressure test in construction, the standard penetration test, plate loading test, geotechnical test after construction, which are all effective methods for effect testing. There is a comprehensive detection through different depth of soil layer with different detecting means on construction site. The results show that improving saturated soft clay land with dynamic and drain consolidation method has obtained good effect, and the fruit can be guidance for such construction in the future.

Research on Simulation of Land Subsidence Characteristics under the Groundwater Level Fluctuation

2013 ◽  
Vol 368-370 ◽  
pp. 1697-1700
Author(s):  
Long Zhang ◽  
Xue Wen Lei ◽  
Qing Shang Meng
Keyword(s):  
Finite Element ◽  
Land Subsidence ◽  
Groundwater Level ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Clay ◽  
Level Fluctuation ◽  
Finite Element Software ◽  
Coastal Cities ◽  
Groundwater Level Fluctuation

Based on the characteristics of frequent land subsidence events caused by groundwater level fluctuation in coastal cities in China and studying on the quaternary sedimentary soft clay in Shanghai, the effects of groundwater level fluctuation on the deformation of soft clay is simulated by Geo-Studio finite element software. It has summarized the law of deformation, effective stress with the change of groundwater level fluctuation, especially the process of dissipation of pore water pressure with the groundwater level fluctuation. The low can be sued as a reference for similar engineering and land subsidence prevention.

scholarly journals Numerical Modelling of Prefabricated Vertical Drain for Soft Clay Using ABAQUS

2015 ◽  
Vol 773-774 ◽  
pp. 1502-1507
Author(s):  
Saiful Azhar Ahmad Tajudin ◽  
Mohd Fairus Yusof ◽  
I. Bakar ◽  
Aminaton Marto ◽  
Muhammad Nizam Zakaria ◽  
...  
Keyword(s):  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Soil ◽  
Soft Clay ◽  
Elastic Model ◽  
Clay Layer ◽  
Soil Consolidation ◽  
Consolidation Process ◽  
Vertical Drain ◽  
Prefabricated Vertical Drain

Construction, buildings and infrastructure founded on soft clays are often affected by settlement problem. Therefore, Prefabricated Vertical Drain (PVD) is one of the best solutions to accelerate soil consolidation by shortening the drainage path. In this study, numerical investigation was carried out to pursue a better understanding of the consolidation behavior of soft clay improved with PVD. The consolidation process accelerated by PVD with surcharge of 50 kPa was analysed using the ABAQUS software by adopting an elastic model. The aim of this study is to compare the settlement and the required time to fully consolidate the soft soil at different drain spacings (1.0 m, 1.5 m and 2.0 m) for two different thickness of the clay layer. The results shows that the time required to completely consolidate the soft soil for 12 m and 20 m thickness of clay layer with different spacings are in the range of 3 months to 66 months. The settlement rate and excess pore water pressure dissipation are increased when the spacing of the drain closer.

Effective stress paths and yielding in soft clays below embankments

1985 ◽  
Vol 22 (3) ◽  
pp. 357-374 ◽  
Author(s):  
D. J. Folkes ◽  
J. H. A. Crooks
Keyword(s):  
Pore Water ◽  
Effective Stress ◽  
Strain Softening ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Clay ◽  
Stress Path ◽  
Excess Pore Water Pressure ◽  
Soft Clays ◽  
Effective Stress Path

Current methods of predicting the response of soft clays to surface loading are often unsuccessful because the assumed constitutive relationships, including effective stress path behaviour, are incorrect. In particular, the transition from small-strain to large-strain behaviour (i.e. yielding) is frequently not taken into account. Recent laboratory testing has demonstrated that the behaviour of soft clays is largely controlled by yielding. The locus of effective stress states causing yield is known as the yield envelope (YE).The effective stress paths (ESP's) in soft clay foundations below the centre of six fills were determined from computed total stresses and measured pore-water pressures. Yield behaviour is clearly indicated by ESP shapes. The yield envelopes inferred from analyses of field data are similar to those obtained from laboratory testing. Effective stress path shapes vary widely, depending on a variety of factors, including imposed stress level, rate of construction, and boundary drainage conditions. This finding contradicts an earlier conclusion that soft clay behaviour can be characterized by a single ESP. Because of the wide range of possible ESP shapes, the parameters [Formula: see text] does not provide an adequate basis for determining the effective stress state in a soft clay.The ESP/YE analyses indicate that yield can occur either during loading or during excess pore-water pressure dissipation following completion of loading. Yield of sensitive soils during loading is usually followed by strain softening. However, in some soils, dilatant behaviour appears to occur. Yield during dissipation of excess pore-water pressure is characterized by a dramatic change in cv and increased compressibility. Key words: soft clay, yield, effective stress paths, field behaviour, strain softening, rate of consolidation.

Numerical Simulation of Pile-Soil Interaction Considering Sand Liquefaction under Earthquake

2012 ◽  
Vol 226-228 ◽  
pp. 1019-1022 ◽  
Author(s):  
Pei Zhen Li ◽  
Dong Ya Ma ◽  
Da Ming Zeng ◽  
Xi Lin Lu
Keyword(s):  
Numerical Simulation ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Clay ◽  
Soil Liquefaction ◽  
Engineering Practice ◽  
Saturated Sand ◽  
Acceleration Response ◽  
Sand Liquefaction ◽  
Vibration Time

Liquefaction is one of the most important damages in pile foundation under earthquake. However, it is very difficult to analyze. Numerical simulation of pile-soil interaction considering saturated sand liquefaction under earthquake is conducted using OpenSees program. In this model, the soil is divided into soft clay soil and saturated sand, and the single pile is embedded in the soil. The results show that the pore water pressure rises and the soil liquefied as vibration time increases. With the nonlinear of the soil develop, the stiffness, bearing capacity and the acceleration response of the soil and the pile decrease, while the displacement response of the soil increases. Therefore, it is necessary to consider the soil liquefaction in the design and analysis in the engineering practice.

Calculation of Consolidation Coefficient and Percent Consolidation from Measured Pore Water Pressure of Soft Clay

2011 ◽  
Vol 250-253 ◽  
pp. 1889-1892
Author(s):  
Yong Mou Zhang ◽  
Jian Chang Zhao
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Soil ◽  
Soft Clay ◽  
Coefficient Of Consolidation ◽  
Consolidation Process ◽  
Consolidation Coefficient

Consolidation coefficient and percent consolidation of soft clay were calculated according to the measured pore water pressure of a project in Pudong Shanghai. Calculated coefficient of consolidation was one magnitude larger than the experimental one. This was in conformity with the actual consolidation process of dynamically-consolidated soft soil.

Modelling unanticipated pore-water pressures in soft clays

1994 ◽  
Vol 31 (5) ◽  
pp. 773-778 ◽  
Author(s):  
Jianhua Yin ◽  
James Graham ◽  
Jack I. Clark ◽  
Longjun Gao
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Creep Behaviour ◽  
Soft Clay ◽  
Field Observations ◽  
Soft Clays ◽  
Secondary Compression ◽  
Pore Water Pressures ◽  
Clay Layers

Field observations in thin soft clay layers may show pore-water pressures that increase for some time after the loading is applied. Reasons for these observations are not well understood. The paper shows how an elastic viscoplastic constitutive model incorporated into the consolidation equation can predict these pore-water pressure increases in soils that exhibit significant creep behaviour (or secondary compression). The phenomenon has been related to relaxation in regions of the profile from which drainage has not yet begun. Key words : clay, consolidation, creep, secondary compression, viscous, relaxation, pore-water pressure, elastic–plastic.

scholarly journals A Simplified Method for Analysis of Laterally Loaded Piles considering Cyclic Soil Degradation

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Yuzhe Yang ◽  
Xiaodong Gao ◽  
Wenbing Wu ◽  
Kangyu Xing
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Lateral Displacement ◽  
Water Pressure ◽  
Soft Clay ◽  
Degradation Model ◽  
Laterally Loaded Pile ◽  
Simplified Method ◽  
Strain Wedge ◽  
Laterally Loaded

This paper proposes a simplified method to analyze the bearing behavior of pile undergoing cyclic lateral load. Firstly, a modified strain model is proposed by utilizing the Duncan–Chang model to describe the stress-strain behavior of soils in the strain wedge. Then, a cyclic degradation model of soft clay considering the accumulation of plastic strain and pore water pressure is presented based on the cyclic triaxial test. Combining with the modified strain wedge model and degradation model of soil, a simplified method is established for the cyclic laterally loaded pile. The accuracy of the present method is verified by comparing it with existing model tests. The results show that the pile lateral displacement and strain wedge depth increase with the number of cycles and cyclic load amplitude. It is necessary to consider the effect of cumulative pore water pressure during the analysis of cyclic laterally loaded pile embedded in soft clay.

Sign in / Sign up

Export Citation Format

Share Document