scholarly journals The Analysis and Simulation with the Fatigue Life of Hemispherical Resonator Gyro

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Lijun Song ◽  
Jiayao Ni ◽  
Lei Zhou ◽  
Wangliang Zhao ◽  
Shaoliang Li ◽  
...  
Keyword(s):  
Residual Stress ◽  
Stress Intensity Factor ◽  
Fatigue Life ◽  
Structural Design ◽  
Fused Silica ◽  
Ansys Software ◽  
Hemispherical Resonator ◽  
Life Analysis ◽  
Fatigue Life Analysis ◽  
Fused Silica Glass

The life and damage of hemispherical resonator are important factors that directly affect the service time and safety of high-precision hemispherical resonator gyro. However, the fused silica glass material used in the hemispherical resonator which was processed in China is mainly imported, and it is too expensive to use the traditional fatigue life experiment, so it is necessary to use the software of fatigue life analysis to analyze its fatigue life. In the paper, the ANSYS software is used to analyze the fatigue life of fused silica hemispherical resonator, to determine the dangerous parts caused by the residual stress to analyze the crack propagation in the fatigue parts, and to obtain the sum stress intensity factor, so as to effectively monitor and prevent the fatigue-prone parts in the process of structural design and use of the hemispherical resonator.

Fatigue Life Analysis of Auger Stem in Soft Coal Seam

2014 ◽  
Vol 472 ◽  
pp. 111-114 ◽  
Author(s):  
Jing Xu ◽  
Yan Xu ◽  
Jia Chun Li
Keyword(s):  
Fatigue Life ◽  
Coal Seam ◽  
Drill Pipe ◽  
Three Dimensional ◽  
Ansys Software ◽  
Three Dimensional Model ◽  
Soft Coal ◽  
Life Analysis ◽  
Fatigue Life Analysis ◽  
Soft Coal Seam

The complex force of the auger stem in soft coal seam is taken as the research object. Then the three-dimensional model of spiral pipe is established in the SOLIDWORKS software, and introduced into the workbench simulation platform of ANSYS software to simulate the stress distribution of the screw drill pipe in actual working conditions. According to the results of the analysis, the conclusion is that the stress concentration is around the pin hole of the female joint and the fatigue life of spiral drill pipe is 280.72 x 10 3 cycles.

scholarly journals Fatigue life analysis of bolt joints with use of ANSYS software

Mechanik ◽  
2018 ◽  
Vol 91 (7) ◽  
pp. 600-602
Author(s):  
Michał Jasztal ◽  
Mariusz Ręgowski
Keyword(s):  
Fatigue Life ◽  
Numerical Calculations ◽  
Lap Joint ◽  
Ansys Software ◽  
Factors Influencing ◽  
Life Analysis ◽  
Fatigue Life Analysis

The paper presents selected problems of fatigue life of bolt joints. An analysis of factors influencing fatigue life of bolt joints was performed and selected methods of improving life were described. Authors presents examples of numerical calculations with use of ANSYS software which depict influence of pre-tension in the bolt on fatigue life of the joint. Presented results of life calculation were carried out for bolt joint loaded along bolt axis and for bolt lap joint loaded perpendicular to bolt axis.

Fatigue Life Analysis of the Basketball Wheelchair Based on Virtual Prototype Technology

2012 ◽  
Vol 538-541 ◽  
pp. 2807-2812 ◽  
Author(s):  
Lei Lei ◽  
Xiao Chun Shi ◽  
Tian Min Guan
Keyword(s):  
Fatigue Life ◽  
Structural Design ◽  
Design Research ◽  
Virtual Prototype ◽  
Analysis Software ◽  
Research Results ◽  
Development Level ◽  
Life Analysis ◽  
Virtual Prototype Technology ◽  
Fatigue Life Analysis

In this paper, we use the virtual prototype technology in combination with fatigue life analysis software to analyze the fatigue life of the basketball wheelchair. Through the analysis, we judged the weakest links which influences the fatigue life in the wheelchair structural design. Research results have the vital significance for improving the performance of the basketball wheelchair and the development level of sports.

Bearing Check Analysis for Automobile Transmission Based on the Software MASTA

2014 ◽  
Vol 620 ◽  
pp. 528-533
Author(s):  
Yong Xiang Li ◽  
Li Hong Jin ◽  
Jia Liang Sheng ◽  
Fu Jin Yu
Keyword(s):  
Fatigue Life ◽  
Structural Design ◽  
Simulation Modeling ◽  
Transmission Performance ◽  
Existing Problems ◽  
Actual Load ◽  
Check Method ◽  
Life Analysis ◽  
Fatigue Life Analysis ◽  
Load Conditions

As the main supporting drive components of the automobile transmission, the transmission bearings are mainly used to support the moving parts installed on the gear shaft, and to ensure the rotary precision of the gear shaft and the rotating parts, which plays an important role on transmission performance. Aiming at the existing problems of the traditional check method of bearing, the objective of this study is to take a five-speed transmission as an example, to accomplish the fatigue life analysis of the bearings of the automobile transmission based on the MASTA software. The simulation modeling of the transmission is built completely to simulate the actual load conditions and complete the process of analysis for the bearings. Analytical results show that using MASTA software can effectively perform the fatigue life analysis of the transmission bearings instead of the general conventional theoretical calculation method in the actual manufacturing process, moreover, the analysis results will provide theoretical basis for the overall optimization structural design of the automobile transmission.

Structure Fatigue Life Analysis of a 1.5MW Smart Yaw Slewing Bearing

2013 ◽  
Vol 779-780 ◽  
pp. 664-670 ◽  
Author(s):  
Yang Feng ◽  
Jie Chen ◽  
Xiao Diao Huang ◽  
Wei Wang
Keyword(s):  
Fatigue Life ◽  
Structural Design ◽  
Critical Role ◽  
Structure Change ◽  
Slewing Bearing ◽  
Structure Reliability ◽  
Significant Interest ◽  
On Line ◽  
Life Analysis ◽  
Fatigue Life Analysis

As an important rolling connection of the wind turbine, yaw slewing bearing plays a critical role in the structure reliability. Therefore, effective health monitoring of a slewing bearing to execute timely maintenance or replacement have attracted significant interest. In order to monitor working conditions on line, various sensors have been used. This paper discussed the installation approaches of various sensors in a yaw slewing bearing, and analyzed the effect of local structure change on the fatigue life of a 1.5MW slewing bearing by MSC.FATIGUE, and thus providing an effective reference for structural design of a smart slewing bearing.

Sign in / Sign up

Export Citation Format

Share Document