scholarly journals Measuring the underwater received power behavior for 433 mhz radio frequency based on different distance and depth for the development of an underwater wireless sensor network

2019 ◽  
Vol 8 (3) ◽  
pp. 1066-1073
Author(s):  
Muhammad Ramdhan M.S ◽  
Muhammad Ali ◽  
Nurzal Effiyana G ◽  
Samura Ali ◽  
Kamaludin M.Y

Underwater wireless sensor network (UWSN) important to enhance the widely use of the application of the Internet of things (IoT) for underwater. Uses of the acoustics base of wave propagations are the best ways to establish the UWSN. But the unpracticality of the hardware due to the size and cost has limited the application of UWSN. Radio frequency (RF) wave propagation is the best way to overcome this situation. Low frequency of the RF wave is proven feasible and suitable for underwater communication. 433 MHz RF were chosen to measuring the underwater received power behavior between the transmitter node and receiver node based on different distance and depth. HC12 transceiver module was used as a transmitter and spectrum analyzer with the telescopic antenna was used as a receiver. The received power give a good reading when the transmitter note was at 0.5-meter depth with a maximum operating range within 12 meters from the receiver.

Author(s):  
Bin Lin

The Internet of Things is another information technology revolution and industrial wave after computer, Internet and mobile communication. It is becoming a key foundation and an important engine for the green, intelligent and sustainable development of economic society. The new networked intelligent production mode characterized by the integration innovation of the Internet of Things is shaping the core competitiveness of the future manufacturing industry. The application of sensor network data positioning and monitoring technology based on the Internet of Things in industry, power and other industries is a hot field for the development of the Internet of Things. Sensor network processing and industrial applications are becoming increasingly complex, and new features have appeared in the sensor network scale and infrastructure in these fields. Therefore, the Internet of Things perception data processing has become a research hotspot in the deep integration process between industry and the Internet of Things. This paper deeply analyzes and summarizes the characteristics of sensor network perception data under the new trend of the Internet of Things as well as the research on location monitoring technology, and makes in-depth exploration from the release and location monitoring of sensor network perception data of the Internet of Things. Sensor network technology integrated sensor technology, micro-electromechanical system technology, wireless communication technology, embedded computing technology and distributed information processing technology in one, with easy layout, easy control, low power consumption, flexible communication, low cost and other characteristics. Therefore, based on the release and location monitoring technologies of sensor network data based on the Internet of Things in different applications, this paper studies the corresponding networking technologies, energy management, data management and fusion methods. Standardization system in wireless sensor network low cost, and convenient data management needs, design the iot oriented middleware, and develops the software and hardware system, the application demonstration, the results show that the design of wireless sensor network based on iot data monitoring and positioning technology is better meet the application requirements, fine convenient integration of software and hardware, and standardized requirements and suitable for promotion.


Author(s):  
Pankaj Kumar Mishra ◽  
Pratik ◽  
Manish Kumar

Wireless Sensor Network (WSN) has an enormous prospective in hazardous areas such as underground coal mines. However, there is a need to ensure safety while installing WSN in underground coal mine as it is hazardous in nature and WSN radiates Radio Frequency (RF) signals which can be an eminent source of ignition. Henceforth when the underground coal mines are equipped with WSN there is a need to set the threshold limits of different physical parameters in order to eradicate such hazards for enabling safety. Therefore, in the present chapter, attempts have been made to assess the required safety for WSN while installing in underground coal mines. In addition, various types of hazards associated with underground coal mines and their consequences are elaborated in details with a glimpse to mitigate them with the use of WSN.


Author(s):  
S. Sundar ◽  
Piyush Arora ◽  
Sarthak Agrawal ◽  
R. Kumar ◽  
Harish M. Kittur

<p>In the last few years,there has been big interest in adhoc wireless network as they have tremendous military and commercial potential[1].Traditionally to test various parameters in the MANET , the most popular approach is to use mobile phone and Laptops and use the popular WIFI based protocol . But in the recent years there is a huge attraction towards the Internet Of things and specifically wireless sensor network. In this paper we are going to test the MANET protocol using zigbee based XBee modules specifally to determine the Range and Throughput of the Xbee netowork using XCTU Software . The sensor network will be deployed in the car parking application to see the parameters in the real time and dynamically see the sustainability of the network .The network is being designed keeping in mind that the nodes are mobile and at the same time the network does not require a standard infrastructure.</p>


Sign in / Sign up

Export Citation Format

Share Document