scholarly journals Determination of empirical parameters for root water uptake models

Author(s):  
Marcos Alex dos Santos
2016 ◽  
Author(s):  
Marcos Alex dos Santos ◽  
Quirijn de Jong van Lier ◽  
Jos C. van Dam ◽  
Andre Herman Freire Bezerra

Abstract. Detailed physical models describing root water uptake (RWU) are an important tool for the prediction of RWU and crop transpiration, but involved hydraulic parameters are hardly-ever available, making them less attractive for many studies. Empirical models are more readily used because of their simplicity and lower data requirements. The purpose of this study is to evaluate the capability of some empirical models to mimic the RWU distribution under varying environmental conditions predicted from numerical simulations with a detailed physical model. A review of some empirical models used as sub-models in ecohydrological models is presented, and alternative empirical RWU models are proposed. The parameters of the empirical models are determined by inverse modelling of simulated depth-dependent RWU. The simulated scenarios give more insight into the behaviour of the physical model, especially under wet soil conditions and high potential transpiration rate. The performance of the empirical models and their optimized empirical parameters depend on the scenario. The largely used empirical RWU model by Feddes only performs well in scenarios with low root length density R, i.e. for the scenarios of low RWU "compensation". For medium and high R, the Feddes RWU model cannot mimic properly the root uptake dynamics as predicted by the physical model. The RWU model by Jarvis provides good predictions only for low and medium R scenarios. For high R, the Jarvis model cannot mimic the uptake patterns predicted by the physical model. Incorporating a newly proposed reduction in the Jarvis model improved RWU predictions. The proposed models are more capable of predicting similar RWU patterns by the physical model. The statistical indices point them as the best alternatives to mimic RWU predictions by the physical model.


2013 ◽  
Vol 1 (No. 3) ◽  
pp. 85-98
Author(s):  
Dohnal Michal ◽  
Dušek Jaromír ◽  
Vogel Tomáš ◽  
Herza Jiří

This paper focuses on numerical modelling of soil water movement in response to the root water uptake that is driven by transpiration. The flow of water in a lysimeter, installed at a grass covered hillslope site in a small headwater catchment, is analysed by means of numerical simulation. The lysimeter system provides a well defined control volume with boundary fluxes measured and soil water pressure continuously monitored. The evapotranspiration intensity is estimated by the Penman-Monteith method and compared with the measured lysimeter soil water loss and the simulated root water uptake. Variably saturated flow of water in the lysimeter is simulated using one-dimensional dual-permeability model based on the numerical solution of the Richards’ equation. The availability of water for the root water uptake is determined by the evaluation of the plant water stress function, integrated in the soil water flow model. Different lower boundary conditions are tested to compare the soil water dynamics inside and outside the lysimeter. Special attention is paid to the possible influence of the preferential flow effects on the lysimeter soil water balance. The adopted modelling approach provides a useful and flexible framework for numerical analysis of soil water dynamics in response to the plant transpiration.


Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 425 ◽  
Author(s):  
Fairouz Slama ◽  
Nessrine Zemni ◽  
Fethi Bouksila ◽  
Roberto De Mascellis ◽  
Rachida Bouhlila

Water scarcity and quality degradation represent real threats to economic, social, and environmental development of arid and semi-arid regions. Drip irrigation associated to Deficit Irrigation (DI) has been investigated as a water saving technique. Yet its environmental impacts on soil and groundwater need to be gone into in depth especially when using brackish irrigation water. Soil water content and salinity were monitored in a fully drip irrigated potato plot with brackish water (4.45 dSm−1) in semi-arid Tunisia. The HYDRUS-1D model was used to investigate the effects of different irrigation regimes (deficit irrigation (T1R, 70% ETc), full irrigation (T2R, 100% ETc), and farmer’s schedule (T3R, 237% ETc) on root water uptake, root zone salinity, and solute return flows to groundwater. The simulated values of soil water content (θ) and electrical conductivity of soil solution (ECsw) were in good agreement with the observation values, as indicated by mean RMSE values (≤0.008 m3·m−3, and ≤0.28 dSm−1 for soil water content and ECsw respectively). The results of the different simulation treatments showed that relative yield accounted for 54%, 70%, and 85.5% of the potential maximal value when both water and solute stress were considered for deficit, full. and farmer’s irrigation, respectively. Root zone salinity was the lowest and root water uptake was the same with and without solute stress for the treatment corresponding to the farmer’s irrigation schedule (273% ETc). Solute return flows reaching the groundwater were the highest for T3R after two subsequent rainfall seasons. Beyond the water efficiency of DI with brackish water, long term studies need to focus on its impact on soil and groundwater salinization risks under changing climate conditions.


2010 ◽  
Vol 97 (9) ◽  
pp. 1382-1388 ◽  
Author(s):  
Derblai Casaroli ◽  
Quirijn de Jong van Lier ◽  
Durval Dourado Neto

Sign in / Sign up

Export Citation Format

Share Document