scholarly journals Parameter Identification of Material Model of Toughened AdhesivePolymer for Elasto-plastic Finite Element Analysis

2018 ◽  
Vol 54 (10) ◽  
pp. 358-366 ◽  
Author(s):  
Norihide ABE ◽  
Yu SEKIGUCHI ◽  
Chiaki SATO
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Parameter Identification ◽  
Material Model ◽  
Element Analysis

Lifetime Prediction of Tires with Regard to Oxidative Aging5

2008 ◽  
Vol 36 (1) ◽  
pp. 63-79 ◽  
Author(s):  
L. Nasdala ◽  
Y. Wei ◽  
H. Rothert ◽  
M. Kaliske
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Superposition Principle ◽  
Accelerated Aging ◽  
Material Model ◽  
Aging Behavior ◽  
Element Analysis ◽  
Material Parameters ◽  
Reaction Processes

Abstract It is a challenging task in the design of automobile tires to predict lifetime and performance on the basis of numerical simulations. Several factors have to be taken into account to correctly estimate the aging behavior. This paper focuses on oxygen reaction processes which, apart from mechanical and thermal aspects, effect the tire durability. The material parameters needed to describe the temperature-dependent oxygen diffusion and reaction processes are derived by means of the time–temperature–superposition principle from modulus profiling tests. These experiments are designed to examine the diffusion-limited oxidation (DLO) effect which occurs when accelerated aging tests are performed. For the cord-reinforced rubber composites, homogenization techniques are adopted to obtain effective material parameters (diffusivities and reaction constants). The selection and arrangement of rubber components influence the temperature distribution and the oxygen penetration depth which impact tire durability. The goal of this paper is to establish a finite element analysis based criterion to predict lifetime with respect to oxidative aging. The finite element analysis is carried out in three stages. First the heat generation rate distribution is calculated using a viscoelastic material model. Then the temperature distribution can be determined. In the third step we evaluate the oxygen distribution or rather the oxygen consumption rate, which is a measure for the tire lifetime. Thus, the aging behavior of different kinds of tires can be compared. Numerical examples show how diffusivities, reaction coefficients, and temperature influence the durability of different tire parts. It is found that due to the DLO effect, some interior parts may age slower even if the temperature is increased.

Elastic and elastic-plastic finite element analysis of hollow tubes with axisymmetric internal projections under combined axial and pressure loading

2001 ◽  
Vol 36 (4) ◽  
pp. 373-390 ◽  
Author(s):  
S. J Hardy ◽  
M. K Pipelzadeh ◽  
A. R Gowhari-Anaraki
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Internal Pressure ◽  
Plastic Material ◽  
Axial Loading ◽  
Material Model ◽  
Pressure Loading ◽  
Element Analysis ◽  
Elastic Plastic ◽  
Applied Loading

This paper discusses the behaviour of hollow tubes with axisymmetric internal projections subjected to combined axial and internal pressure loading. Predictions from an extensive elastic and elastic-plastic finite element analysis are presented for a typical geometry and a range of loading combinations, using a simplified bilinear elastic-perfectly plastic material model. The axial loading case, previously analysed, is extended to cover the additional effect of internal pressure. All the predicted stress and strain data are found to depend on the applied loading conditions. The results are normalized with respect to material properties and can therefore be applied to geometrically similar components made from other materials, which can be represented by the same material models.

Prediction of Cutting Force in Bone Cutting Using Finite Element Analysis

2021 ◽  
Author(s):  
Varatharajan Prasannavenkadesan ◽  
Ponnusamy Pandithevan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cutting Force ◽  
Material Model ◽  
Tensile Tests ◽  
Bovine Bone ◽  
Element Analysis ◽  
Cutting Processes ◽  
Parameter Values ◽  
First Time

Abstract In orthopedic surgery, bone cutting is an indispensable procedure followed by the surgeons to treat the fractured and fragmented bones. Because of the unsuitable parameter values used in the cutting processes, micro crack, fragmentation, and thermal osteonecrosis of bone are observed. Therefore, prediction of suitable cutting force is essential to subtract the bone without any adverse effect. In this study, the Cowper-Symonds model for bovine bone was developed for the first time. Then the developed model was coupled with the finite element analysis to predict the cutting force. To determine the model constants, tensile tests with different strain rates (10−5/s, 10−4/s, 10−3/s, and 1/s) were conducted on the cortical bone specimens. The developed material model was implemented in the bone cutting simulation and validated with the experiments.

Fatigue Life Prediction of the Vulcanized Natural Rubber

2005 ◽  
Vol 297-300 ◽  
pp. 16-21
Author(s):  
Chang Su Woo ◽  
Wan Doo Kim ◽  
Jae Do Kwon ◽  
Wan Soo Kim
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Natural Rubber ◽  
Fatigue Damage ◽  
Material Model ◽  
Damage Parameter ◽  
Element Analysis ◽  
Critical Location ◽  
Lagrange Strain ◽  
Mean Strain

Fatigue lifetime prediction methodology of the vulcanized natural rubber was proposed by incorporating the finite element analysis and fatigue damage parameter determined from fatigue test. Finite element analysis of 3D dumbbell specimen of natural rubber was performed based on a hyper-elastic material model determined from the tension, compression and shear tests. Stroke controlled fatigue tests were conducted using fatigue specimens at different levels of mean strain. The Green-Lagrange strain at the critical location determined from the FEM was used for evaluating the fatigue damaged parameter of the natural rubber. It was shown that the maximum Green-Lagrange strain was proper damage parameter, taking the mean strain effects into account. Fatigue lives of the natural rubber are predicted by using the fatigue damage parameters at the critical location. Predicted fatigue lives of the natural rubber agreed fairly well the experimental fatigue lives a factor of two.

Finite Element Calculation of Sintering Deformation Using Limited Experimental Data

2008 ◽  
Vol 606 ◽  
pp. 103-118 ◽  
Author(s):  
Jing Zhe Pan ◽  
Ruo Yu Huang
Keyword(s):  
Experimental Data ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Ceramic Powder ◽  
Material Model ◽  
Element Analysis ◽  
Ceramic Components ◽  
On Line ◽  
Element Method

Predicting the sintering deformation of ceramic powder compacts is very important to manufactures of ceramic components. In theory the finite element method can be used to calculate the sintering deformation. In practice the method has not been used very often by the industry for a very simple reason – it is more expensive to obtain the material data required in a finite element analysis than it is to develop a product through trial and error. A finite element analysis of sintering deformation requires the shear and bulk viscosities of the powder compact. The viscosities are strong functions of temperature, density and grain-size, all of which change dramatically in the sintering process. There are two ways to establish the dependence of the viscosities on the microstructure: (a) by using a material model and (b) by fitting the experimental data. The materials models differ from each other widely and it can be difficult to know which one to use. On the other hand, obtaining fitting functions is very time consuming. To overcome this difficulty, Pan and his co-workers developed a reduced finite element method (Kiani et. al. J. Eur. Ceram. Soc., 2007, 27, 2377-2383; Huang and Pan, J. Eur. Ceram. Soc., available on line, 2008) which does not require the viscosities; rather the densification data (density as function of time) is used to predict sintering deformation. This paper provides an overview of the reduced method and a series of case studies.

A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Leslee W. Brown ◽  
Lorenzo M. Smith
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Transversely Isotropic ◽  
Material Model ◽  
Fiber Reinforced ◽  
Element Analysis ◽  
Material Tests

A transversely isotropic fiber reinforced elastomer’s hyperelasticity is characterized using a series of constitutive tests (uniaxial tension, uniaxial compression, simple shear, and constrained compression test). A suitable transversely isotropic hyperelastic invariant based strain energy function is proposed and methods for determining the material coefficients are shown. This material model is implemented in a finite element analysis by creating a user subroutine for a commercial finite element code and then used to analyze the material tests. A useful set of constitutive material data for multiple modes of deformation is given. The proposed strain energy function fits the experimental data reasonably well over the strain region of interest. Finite element analysis of the material tests reveals further insight into the materials constitutive nature. The proposed strain energy function is suitable for finite element use by the practicing engineer for small to moderate strains. The necessary material coefficients can be determined from a few simple laboratory tests.

Sign in / Sign up

Export Citation Format

Share Document