Development of Methodology for Main Pipelines Linear Section Stress-Strain State Сhanges Assessment

The paper shows that the linear segments of the main pipelines laid on water-logged grounds are characterized by the floating parts 150–300 m long, with arch blowouts with a deflection of 1.0–1.5 m. This occurs due to the vertical axial loads and the temperature difference. The buckling stability of the floating part is calculated for the pipeline laid in a bog. It is shown that the loss of the buckling stability in the form of the floating parts and arch blowout can be explained by the fact that the project on the water-logged ground construction has no the analysis of the buckling stability under axial loads with regard to the topography of the trench bottom that describes the stress-strain state of the pipeline. At a design stage, it is necessary to conduct more detailed surveys on the pipeline laying with regard to the trench profile in calculating the pipeline buckling stability on water-logged grounds.

Download Full-text

RESEARCH OF INFLUENCE OF UNFINISHED CONSTRUCTION EXCAVATION ON STRESS-STRAIN STATE OF EXPLOITED BUILDING BEARING STRUCTURES

Building constructions. Theory and Practice ◽

10.32347/2522-4182.2.2018.3-12 ◽

2018 ◽

Vol 0 (2) ◽

pp. 3-12

Author(s):

A Banakh

Keyword(s):

Strain State ◽

Stress Strain ◽

Stress Strain State

Download Full-text

КОНСТРУКТИВНО-ТЕХНОЛОГІЧНІ ОСОБЛИВОСТІ ХВОСТО-ВИХ БАЛОК СІТЧАСТОГО ТИПУ З ПОЛІМЕРНИХ КОМПО-ЗИЦІЙНИХ МАТЕРІАЛІВ ВЕРТОЛЬОТІВ ТРАНСПОРТНОЇ КАТЕГОРІЇ

Open Information and Computer Integrated Technologies ◽

10.32620/oikit.2020.88.02 ◽

2020 ◽

pp. 15-30

Author(s):

А. Г. Гребеников ◽

И. В. Малков ◽

В. А. Урбанович ◽

Н. И. Москаленко ◽

Д. С. Колодийчик

Keyword(s):

Finite Element ◽

Strain State ◽

Layer Structure ◽

Metal Structure ◽

Element Model ◽

Stress Strain ◽

Element Analysis ◽

Mesh Structure ◽

Stress Strain State ◽

Mesh Structures

The analysis of the design and technological features of the tail boom (ТB) of a helicopter made of polymer composite materials (PCM) is carried out.Three structural and technological concepts are distinguished - semi-monocoque (reinforced metal structure), monocoque (three-layer structure) and mesh-type structure. The high weight and economic efficiency of mesh structures is shown, which allows them to be used in aerospace engineering. The physicomechanical characteristics of the network structures are estimated and their uniqueness is shown. The use of mesh structures can reduce the weight of the product by a factor of two or more.The stress-strain state (SSS) of the proposed tail boom design is determined. The analysis of methods for calculating the characteristics of the total SSS of conical mesh shells is carried out. The design of the tail boom is presented, the design diagram of the tail boom of the transport category rotorcraft is developed. A finite element model was created using the Siemens NX 7.5 system. The calculation of the stress-strain state (SSS) of the HC of the helicopter was carried out on the basis of the developed structural scheme using the Advanced Simulation module of the Siemens NX 7.5 system. The main zones of probable fatigue failure of tail booms are determined. Finite Element Analysis (FEA) provides a theoretical basis for design decisions.Shown is the effect of the type of technological process selected for the production of the tail boom on the strength of the HB structure. The stability of the characteristics of the PCM tail boom largely depends on the extent to which its design is suitable for the use of mechanized and automated production processes.A method for the manufacture of a helicopter tail boom from PCM by the automated winding method is proposed. A variant of computer modeling of the tail boom of a mesh structure made of PCM is shown.The automated winding technology can be recommended for implementation in the design of the composite tail boom of the Mi-2 and Mi-8 helicopters.

Download Full-text