Tuning the Magnetic Properties of Iron Oxide Nanoparticles by a Room-Temperature Air-Atmosphere (RTAA) Co-Precipitation Method

2015 ◽  
Vol 15 (5) ◽  
pp. 3870-3878 ◽  
Author(s):  
S. Vikram ◽  
M. Dhakshnamoorthy ◽  
R. Vasanthakumari ◽  
A. R. Rajamani ◽  
Murali Rangarajan ◽  
...  
2013 ◽  
Vol 756 ◽  
pp. 74-79 ◽  
Author(s):  
Bashiru Kayode Sodipo ◽  
Azlan Abdul Aziz

Superparamagnetic iron oxide nanoparticles (SPION) of sizes 5 to10 nm were synthesized by the co-precipitation method. They are coated with silica nanoparticles using sonication method. The SPION was produced under the optimum pH of 10, peptized in acidic medium and redispersed in water. The silica nanoparticles were produced through the Stöbermethod. Sonochemical coating of silica nanoparticle on the SPION was successfulat a pH value lower than 5. Otherwise, at higher pH value (but lower than point zero charge (PZC)), the SPION were found to be unstable. Fast hydrolysis of triethoxyvinylsilane(TEVS) shows that silica forms its own particles without coating onto the surfaces of the SPION. Under optimized experimental condition, sonochemical method of coating silica nanoparticles onto the SPION can be considered as an alternative for effective and prompt method that rely mainly on pH of the suspension.


2017 ◽  
Vol 41 (5) ◽  
pp. 2055-2061 ◽  
Author(s):  
Tokeer Ahmad ◽  
Ruby Phul ◽  
Nafeesa Khatoon ◽  
Meryam Sardar

Iron oxide nanoparticles (IONPs) were preparedviaa co-precipitation method and were then characterized and evaluated for their antibacterial activity after modification withOcimum sanctumleaf extract.


Author(s):  
John M. Melnyczuk ◽  
Soubantika Palchoudhury

Iron oxide nanoparticles show great promise in bio-applications like drug delivery, magnetic resonance imaging, and hyperthermia. This is because the size of these magnetic nanoparticles is comparable to biomolecules and the particles can be removed via normal iron metabolic pathways. These nanoparticles are also attractive for industrial separations and catalysis because they can be magnetically recovered. However, the size, morphology, and surface coating of the iron oxide nanoparticles greatly affect their magnetic properties and biocompatibility. Therefore, nanoparticles with tunable characteristics are desirable. This chapter elaborates the synthesis techniques for the formation of iron oxide nanoparticles with good control over reproducibility, surface and magnetic properties, and morphology. The well-known co-precipitation and thermal decomposition methods are detailed in this chapter. The surface modification routes and characterization of these nanoparticles are also discussed. The chapter will be particularly useful for engineering/science graduate students and/or faculty interested in synthesizing iron oxide nanoparticles for specific research applications.


2017 ◽  
Vol 105 (2) ◽  
Author(s):  
Gehan E. Sharaf El-Deen ◽  
Neama G. Imam ◽  
Refaat R. Ayoub

AbstractSuperparamagnetic iron oxide nanoparticles (IO-MNPs) coated with natural polymers, starch (IO-S MNPs) and dextrin (IO-D MNPs), were synthesized by modified co-precipitation method. IO and hybrid-IO-MNPs were characterized by XRD, SEM, HRTEM, FT-IR spectroscopy, vibrating sample magnetometer (VSM) and zeta potential (ZP). IO-S MNPs and IO-D MNPs have IO core-shell structure with core of 10.8 nm and 13.8 nm and shell of 7.5 nm and 5.9 nm, respectively. The efficiency of the hybrid IO-MNPs for sorption of


RSC Advances ◽  
2015 ◽  
Vol 5 (24) ◽  
pp. 18420-18428 ◽  
Author(s):  
A. B. Salunkhe ◽  
V. M. Khot ◽  
J. M. Ruso ◽  
S. I. Patil

Superparamagnetic iron oxide nanoparticles are synthesized through the co precipitation method by using the new generation base diisopropylamine (DIPA) which electrostatically complexes with the iron ions, reduces them and subsequently caps the nanoparticles.


Sign in / Sign up

Export Citation Format

Share Document