Color Tuning of 2-Color Based White Organic Light-Emitting Diodes with Undoped Ultra-Thin Emission Layer

2021 ◽  
Vol 21 (8) ◽  
pp. 4179-4184
Author(s):  
Shin Woo Kang ◽  
Dong-Hyun Baek ◽  
Byeong-Kwon Ju ◽  
Young Wook Park

In the research of organic light-emitting diodes (OLEDs), the OLEDs that are fabricated via conventional doping methods have complicated structures and fabrication processes. To overcome these limitations, the ultra-thin emission layer (EML) method, which adopts a simple structure has been effectively used in the research of OLEDs. However, studies on white color OLEDs (WOLEDs) fabricated using the ultra-thin EML method are scarce. In this paper, we report the results of color tuning for the realization of WOLEDs based on an ultra-thin EML structure. The WOLEDs were fabricated and evaluated based on a two-color dopant system (sky-blue dopant and yellow dopant). The fabricated WOLEDs exhibited color coordinates of the International Commission on Illumination (CIE) 1931 from (0.287, 0.436) to (0.486, 0.483) according to the thickness ratio of the two dopants. This result suggests that the WOLEDs color tuned with multi-color dopants can be fabricated based on the ultra-thin EML method, and the development of WOLEDs with high efficiency and stability can be attained in the future.

2018 ◽  
Vol 6 (40) ◽  
pp. 10793-10803 ◽  
Author(s):  
Shian Ying ◽  
Dezhi Yang ◽  
Xianfeng Qiao ◽  
Yanfeng Dai ◽  
Qian Sun ◽  
...  

High-performance WOLEDs realizing high efficiency and low efficiency roll-off simultaneously were achieved by strategically managing triplet excitons in the emission layer.


2021 ◽  
Vol 15 (3) ◽  
pp. 208-215 ◽  
Author(s):  
Soon Ok Jeon ◽  
Kyung Hyung Lee ◽  
Jong Soo Kim ◽  
Soo-Ghang Ihn ◽  
Yeon Sook Chung ◽  
...  

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Maria Vasilopoulou ◽  
Abd. Rashid bin Mohd Yusoff ◽  
Matyas Daboczi ◽  
Julio Conforto ◽  
Anderson Emanuel Ximim Gavim ◽  
...  

AbstractBlue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m−2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.


Sign in / Sign up

Export Citation Format

Share Document