Hydrothermal Synthesis, Morphology Control and Luminescent Properties of Nano/Microstructured Rare Earth Oxide Species

2013 ◽  
Vol 2 (4) ◽  
pp. 225-246 ◽  
Author(s):  
Zhenhe Xu ◽  
Jun Lin
Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7432
Author(s):  
Radu-Robert Piticescu ◽  
Anca Elena Slobozeanu ◽  
Sorina Nicoleta Valsan ◽  
Cristina Florentina Ciobota ◽  
Andreea-Nicoleta Ghita ◽  
...  

Zirconium dioxide (ZrO2) is one of the ceramic materials with high potential in many areas of modern technologies. ZrO2 doped with 8 wt.% (~4.5 mol%) Y2O3 is a commercial powder used for obtaining stabilized zirconia materials (8 wt.% YSZ) with high temperature resistance and good ionic conductivity. During recent years it was reported the co-doping with multiple rare earth elements has a significant influence on the thermal, mechanical and ionic conductivity of zirconia, due complex grain size segregation and enhanced oxygen vacancies mobility. Different methods have been proposed to synthesize these materials. Here, we present the hydrothermal synthesis of 8 wt.% (~4.5 mol%) YSZ co-doped with 4, 6 and 8 wt.% La2O3, Nd2O3, Sm2O3 and Gd2O3 respectively. The crystalline phases formed during their thermal treatment in a large temperature range were analyzed by X-ray diffraction. The evolution of phase composition vs. thermal treatment temperatures shows as a major trend the formation at temperatures >1000 °C of a cubic solid solutions enriched in the rare earth oxide used for co-doping as major phase. The first results on the thermal conductivities and impedance measurements on sintered pellets obtained from powders co-doped with 8 wt.% Y and 6% Ln (Ln = La, Nd, Sm and Gd) and the corresponding activation energies are presented and discussed. The lowest thermal conductivity was obtained for La co-doped 8 wt.% YSZ while the lowest activation energy for ionic conduction for Gd co-doped 8 wt.% YSZ materials.


RSC Advances ◽  
2013 ◽  
Vol 3 (8) ◽  
pp. 2794 ◽  
Author(s):  
Rafael Di Lazaro Gaspar ◽  
Emille Martinazzo Rodrigues ◽  
Italo Odone Mazali ◽  
Fernando Aparecido Sigoli

2012 ◽  
Vol 47 (6) ◽  
pp. 1310-1315 ◽  
Author(s):  
Wenjuan Huang ◽  
Chunhua Lu ◽  
Chenfei Jiang ◽  
Junyang Jin ◽  
Mingye Ding ◽  
...  

2012 ◽  
Vol 48 (5) ◽  
pp. 2258-2267 ◽  
Author(s):  
Jun Yang ◽  
Honggui Zhang ◽  
Zhenling Wang ◽  
Chengzhi Huang ◽  
Lei Zou ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3717
Author(s):  
Jae-Young Jung ◽  
Soung-Soo Yi ◽  
Dong-Hyun Hwang ◽  
Chang-Sik Son

The precursor prepared by co-precipitation method was sintered at various temperatures to synthesize crystalline manganese tungstate (MnWO4). Sintered MnWO4 showed the best crystallinity at a sintering temperature of 800 °C. Rare earth ion (Dysprosium; Dy3+) was added when preparing the precursor to enhance the magnetic and luminescent properties of crystalline MnWO4 based on these sintering temperature conditions. As the amount of rare earth ions was changed, the magnetic and luminescent characteristics were enhanced; however, after 0.1 mol.%, the luminescent characteristics decreased due to the concentration quenching phenomenon. In addition, a composite was prepared by mixing MnWO4 powder, with enhanced magnetism and luminescence properties due to the addition of dysprosium, with epoxy. To one of the two prepared composites a magnetic field was applied to induce alignment of the MnWO4 particles. Aligned particles showed stronger luminescence than the composite sample prepared with unsorted particles. As a result of this, it was suggested that it can be used as phosphor and a photosensitizer by utilizing the magnetic and luminescent properties of the synthesized MnWO4 powder with the addition of rare earth ions.


Sign in / Sign up

Export Citation Format

Share Document