scholarly journals Coupling of Integrated Biosphere Simulator to Regional Climate Model Version 3

2009 ◽  
Vol 22 (10) ◽  
pp. 2743-2757 ◽  
Author(s):  
Jonathan M. Winter ◽  
Jeremy S. Pal ◽  
Elfatih A. B. Eltahir
Keyword(s):  
Heat Flux ◽  
Regional Climate Model ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Climate Model ◽  
Regional Climate ◽  
Sensible Heat Flux ◽  
Longwave Radiation ◽  
Sensible Heat ◽  
Integrated Biosphere Simulator

Abstract A description of the coupling of Integrated Biosphere Simulator (IBIS) to Regional Climate Model version 3 (RegCM3) is presented. IBIS introduces several key advantages to RegCM3, most notably vegetation dynamics, the coexistence of multiple plant functional types in the same grid cell, more sophisticated plant phenology, plant competition, explicit modeling of soil/plant biogeochemistry, and additional soil and snow layers. A single subroutine was created that allows RegCM3 to use IBIS for surface physics calculations. A revised initialization scheme was implemented for RegCM3–IBIS, including an IBIS-specific prescription of vegetation and soil properties. To illustrate the relative strengths and weaknesses of RegCM3–IBIS, one 4-yr numerical experiment was completed to assess ability of both RegCM3–IBIS (with static vegetation) and RegCM3 with its native land surface model, Biosphere–Atmosphere Transfer Scheme 1e (RegCM3–BATS1e), to simulate the energy and water budgets. Each model was evaluated using the NASA Surface Radiation Budget, FLUXNET micrometeorological tower observations, and Climate Research Unit Time Series 2.0. RegCM3–IBIS and RegCM3–BATS1e simulate excess shortwave radiation incident and absorbed at the surface, especially during the summer months. RegCM3–IBIS limits evapotranspiration, which allows for the correct estimation of latent heat flux, but increases surface temperature, sensible heat flux, and net longwave radiation. RegCM3–BATS1e better simulates temperature, net longwave radiation, and sensible heat flux, but systematically overestimates latent heat flux. This objective comparison of two different land surface models will help guide future adjustments to surface physics schemes within RegCM3.

scholarly journals Evaluation of functional properties of various types of vegetation cover using remotely sensed data analysis

2010 ◽  
Vol 4 (Special Issue 2) ◽  
pp. S49-S58 ◽  
Author(s):  
J. Brom ◽  
J. Procházka ◽  
A. Rejšková
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Hydrological Cycle ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Remotely Sensed Data ◽  
Mean Values

The dissipation of solar energy and consequently the formation of the hydrological cycle are largely dependent on the structural and optical characteristics of the land surface. In our study, we selected seven units with different types of vegetation in the Mlýnský and Horský catchments (South-Eastern part of the Šumava Mountains, Czech Republic) for the assessment of the differences in their functioning expressed through the surface temperature, humidity, and energy dissipation. For our analyses, we used Landsat 5 TM satellite data from June 25<SUP>th</SUP>, 2008. The results showed that the microclimatic characteristics and energy fluxes varied in different units according to their vegetation characteristics. A cluster analysis of the mean values was used to divide the vegetation units into groups according to their functional characteristics. The mown meadows were characterised by the highest surface temperature and sensible heat flux and the lowest humidity and latent heat flux. On the contrary, the lowest surface temperature and sensible heat flux and the highest humidity and latent heat flux were found in the forest. Our results showed that the climatic and energetic features of the land surface are related to the type of vegetation. We state that the spatial distribution of different vegetation units and the amount of biomass are crucial variables influencing the functioning of the landscape.

The progress on the observation and modeling of surface heat fluxes and evapotranspiration over heterogeneous landscapes of the Third Pole region

2020 ◽  
Author(s):  
Yaoming Ma
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

&lt;p&gt;The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People&amp;#8217;s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2016 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.&lt;/p&gt;

scholarly journals Estimation of Land Surface Heat Fluxes Based on Landsat 7 ETM+ Data and Field Measurements over the Northern Tibetan Plateau

2019 ◽  
Vol 11 (24) ◽  
pp. 2899
Author(s):  
Nan Ge ◽  
Lei Zhong ◽  
Yaoming Ma ◽  
Meilin Cheng ◽  
Xian Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Land Surface Heat Fluxes

Land surface heat fluxes consist of the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. The estimation of these fluxes is essential to the study of energy transfer in land–atmosphere systems. In this paper, Landsat 7 ETM+ SLC-on data were applied to estimate the land surface heat fluxes on the northern Tibetan Plateau using the SEBS (surface energy balance system) model, in combination with the calculation of field measurements at CAMP/Tibet (Coordinated Enhanced Observing Period (CEOP) Asia–Australia Monsoon Project on the Tibetan Plateau) automatic weather stations based on the combinatory method (CM) for comparison. The root mean square errors between the satellite estimations and the CM calculations for the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux were 49.2 W/m2, 46.3 W/m2, 68.2 W/m2, and 54.9 W/m2, respectively. The results reveal that land surface heat fluxes all present significant seasonal variability. Apart from the sensible heat flux, the satellite-estimated net radiation flux, soil heat flux, and latent heat flux exhibited a trend of summer > spring > autumn > winter. In summer, spring, autumn, and winter, respectively, the median values of the net radiation flux (631.8 W/m2, 583.0 W/m2, 404.4 W/m2, 314.3 W/m2), soil heat flux (40.9 W/m2, 37.9 W/m2, 26.1 W/m2, 20.5 W/m2), sensible heat flux (252.7 W/m2, 219.5 W/m2, 221.4 W/m2, 204.8 W/m2), and latent heat flux (320.1 W/m2, 298.3 W/m2, 142.3 W/m2, 75.5 W/m2) exhibited distinct seasonal diversity. From November to April, the in situ sensible heat flux is higher than the latent heat flux; the opposite is true between June and September, leaving May and October as transitional months. For water bodies, alpine meadows and other main underlying surface types, sensible and latent heat flux generally present contrasting and complementary spatial distributions. Due to the 15–60 m resolution of the Landsat 7 ETM+ data, the distribution of land surface heat fluxes can be used as an indicator of complex underlying surface types over the northern Tibetan Plateau.

Climate and Vegetation in the Middle East: Interannual Variability and Drought Feedbacks

2007 ◽  
Vol 20 (15) ◽  
pp. 3924-3941 ◽  
Author(s):  
Benjamin F. Zaitchik ◽  
Jason P. Evans ◽  
Roland A. Geerken ◽  
Ronald B. Smith
Keyword(s):  
Heat Flux ◽  
Interannual Variability ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Vegetation Index ◽  
Climate Model ◽  
Sensible Heat Flux ◽  
Radiation Balance ◽  
Turbulent Heat ◽  
Sensible Heat

Abstract The Euphrates Plain (EP) experiences large interannual variability in vegetation cover, especially in areas of marginal rain-fed agriculture. Vegetation in this region is primarily limited by available soil moisture, as determined by winter precipitation, spring precipitation, and air temperature. Satellite analyses indicate that the springtime normalized difference vegetation index (NDVI) is negatively correlated with surface albedo, and that interannual variability in albedo in the EP produces an estimated forcing on the radiation balance that peaks at 16.0 W m−2 in May. Simulations with a regional climate model indicate that surface energy fluxes during a drought year (1999) differed substantially from those during a year with normal precipitation (2003). These differences were geographically specific, with the EP exhibiting increased albedo and decreased sensible heat flux while the neighboring Zagros Plateau region showed no albedo effect, a large increase in sensible heat flux, and an offsetting reduction in latent heat flux. In both the EP and the Zagros there was a potential for positive feedbacks on temperature and drought in late spring, though the most likely feedback mechanisms differed between the two regions: in the EP surface brightening leads to cooling and reduced turbulent heat flux, while in the Zagros region reduced latent heat flux leads to warming and a deepening of the planetary boundary layer.

scholarly journals The surface energy balance in a cold-arid permafrost environment, Ladakh Himalaya, India

2020 ◽  
Author(s):  
John Mohd Wani ◽  
Renoj J. Thayyen ◽  
Chandra Shekhar Prasad Ojha ◽  
Stephan Gruber
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Surface Energy ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Surface Energy Balance ◽  
Sensible Heat Flux ◽  
Longwave Radiation ◽  
Sensible Heat ◽  
The Alps

Abstract. Cryosphere of the cold-arid trans-Himalayan region is unique with its significant permafrost cover. While the information on the permafrost characteristics and its extent started emerging, the governing energy regimes of this cryosphere region is of particular interest. This paper present the results of Surface Energy Balance (SEB) studies carried out in the upper Ganglass catchment in the Ladakh region of India, which feed directly to the River Indus. The point SEB is estimated using the one-dimensional mode of GEOtop model from 1 September 2015 to 31 August 2017 at 4727 m a.s.l elevation. The model is evaluated using field monitored radiation components, snow depth variations and one-year near-surface ground temperatures and showed good agreement with the respective simulated values. The study site has an air temperature range of −23.7 to 18.1 °C with a mean annual average temperature (MAAT) of −2.5 and ground surface temperature range of −9.8 to 19.1 °C. For the study period, the surface energy balance characteristics of the cold-arid site show that the net radiation was the major component with mean value of 28.9 W m−2 followed by sensible heat flux (13.5 W m−2) and latent heat flux (12.8 W m−2), and the ground heat flux was equal to 0.4 W m−2. The partitioning of energy balance during the study period shows that 47 % of Rn was converted into H, 44 % into LE, 1 % into G and 7 % for melting of seasonal snow. Both the study years experienced distinctly different, low and high snow regime. Key differences due to this snow regime change in surface energy balance characteristics were observed during peak summer (July–August). The latent heat flux was higher (lower) during this period with 39 W m−2 (11 W m−2) during high (low) snow years. The study also shows that the sensible heat flux during the early summer season (May, June) of the high (low) snow was much smaller (higher) −3.4 W m−2 (36.1 W m−2). During the study period, snow cover builds up in the catchment initiated by the last week of December facilitating the ground cooling by almost three months (October to December) of sub-zero temperatures up to −20 °C providing a favourable environment for permafrost. It is observed that the Ladakh region have a very low relative humidity in the range of 43 % as compared to, e.g., ~ 70 % in the Alps facilitating lower incoming longwave radiation and strongly negative net longwave radiation averaging ~ −90 W m−2 compared to −40 W m−2 in the Alps. Hence, the high elevation cold-arid region land surfaces could be overall colder than the locations with more RH such as the Alps. Further, it is apprehended that high incoming shortwave radiation in the region may be facilitating enhanced cooling of wet valley bottom surfaces as a result of stronger evaporation.

The Role of Soil Properties on Regional Climate Simulations

2020 ◽  
Author(s):  
E. Hugo Berbery ◽  
Eli Dennis
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Great Plains ◽  
Soil Texture ◽  
Land Surface ◽  
Hydraulic Properties ◽  
Regional Climate ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Sensible Heat

&lt;p&gt;The land surface is inextricably linked to the atmospheric circulation as it dictates the location and strength of land surface-atmosphere (LA) coupling mechanisms. In this context, soil hydraulic properties are critical to estimate sub-surface processes and fluxes at the surface. &amp;#160;In most numerical weather and climate models, those properties are assigned through maps of soil texture complemented with look-up tables.&amp;#160; Then, the hydraulic properties are used in a large variety of process parameterizations within the models.&amp;#160; In this study, we investigate the sensitivity of the simulated regional climate to changes in the prescribed soil maps in the WRF/CLM4 modeling suite. &amp;#160;Comparison of two widely used soil texture databases, the USGS State Soil Geographic Database (STATSGO) and Beijing Normal University&amp;#8217;s soil texture database (GSDE), over the United States and Central America reveals that only 32% of soil texture classifications are in common. Further, the differences are not random but tend to depict small-to-large spatial patterns with a preponderance of either finer or coarser grains. Over North America, the US Great Plains have finer grains in GSDE than in STATSGO, while the opposite is true over Central Mexico.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Seasonal simulations were carried out to assess the changes in the soil-water system that result from changing the soil types (GSDE vs. STATSGO) and their corresponding hydraulic properties. Wherever GSDE has finer grains than STATSGO (e.g., over the US Great Plains), the soil will retain water more strongly as evidenced by smaller latent heat fluxes and larger sensible heat flux. On the other hand, areas of coarser grains in GSDE (e.g., over central Mexico) exhibit an increase in latent heat fluxes and a corresponding decrease in sensible heat flux. Regions with an increase/decrease in latent heat flux have a corresponding increase/decrease in the 2-m moisture content. Similar relations are obtained between sensible heat flux and 2-m temperature. These changes also affect the atmospheric column, which responds with an increase/decrease of temperature and height of the planetary boundary layer. Changes in the vertical structure induce changes in the vertical instability and winds. Interestingly, the chain of modifications resulting from soil texture changes impact the moisture fluxes, and more generally, the atmospheric water budget.&lt;/p&gt;

Energy management in dry canopy starts with efficient leaf-scale heat exchange

2020 ◽  
Author(s):  
Jonathan D. Müller ◽  
Eyal Rotenberg ◽  
Fedor Tatarinov ◽  
Itay Oz ◽  
Efrat Schwartz ◽  
...  
Keyword(s):  
Heat Flux ◽  
Heat Exchange ◽  
Energy Management ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Longwave Radiation ◽  
Shortwave Radiation ◽  
Wave Radiation ◽  
Sensible Heat

&lt;p&gt;Dry forests are expected to heat up considerably more than adjacent shrubland areas due to lower albedo and reduced latent heat flux. Paradoxically, the forest surface at our research site was observed to be cooler than the non-forested neighbouring areas during drought. This reflected the control over canopy temperature through the sensible heat flux, i.e. a 'convector effect'. Our objective was to examine how the efficient non-evaporative energy management, critical to protect the biological functioning of dryland ecosystems, develops at the small, leaf scale.&amp;#160;&lt;/p&gt;&lt;p&gt;We developed a novel system to continuously measure the energy balance and heat dissipation mechanisms on a leaf scale under field conditions. It allows the measurement of emitted leaf and background longwave radiation, and estimating the incoming, absorbed and reflected shortwave radiation using PAR measurements and full spectrum models.&amp;#160; Latent heat exchange and photosynthetic activity were measured with branch chambers. The system was deployed during the long summer drought (&gt;8 months) in drought-exposed and irrigated plots in our semi-arid research Aleppo Pine forest site in southern Israel (mean daytime temperature of &gt;30&amp;#176;C).&lt;/p&gt;&lt;p&gt;Preliminary results showed that in spite of a x10 higher transpiration rate in the irrigated plot compared with the control plots, leaf temperature remains within 1-2&amp;#176;C of air temperature on average in both plots during direct exposure to sunlight at midday. These results suggest an effective leaf to air heat transfer which prevents overheating independent of the latent heat flux. Under the high radiation load, the midday summer value of incoming shortwave radiation was &gt;800 W&amp;#183;m&lt;sup&gt;-2&lt;/sup&gt; (mostly absorbed by the low albedo leaves), and background longwave radiation was &gt;500 W&amp;#183;m&lt;sup&gt;-2&lt;/sup&gt;. In turn, the energy dissipation in the drought-exposed trees was dominated by sensible heat flux of &gt;500 W&amp;#183;m&lt;sup&gt;-2&lt;/sup&gt;, while the long-wave radiation balance was near neutral (~50 W m&lt;sup&gt;-2&lt;/sup&gt;), and the residual latent heat flux was &lt;50 W&amp;#183;m&lt;sup&gt;-2&lt;/sup&gt;. We demonstrated a system that provided new insights to leaf and canopy energy management under drought, which is a basis for the evolution of the convector effect.&lt;/p&gt;

The observation and modeling of air-land interaction over heterogeneous landscapes of the Third Pole

2021 ◽  
Author(s):  
Yaoming Ma ◽  
Zeyong Hu ◽  
Binbin Wang ◽  
Lei Zhong ◽  
Weiqiang Ma ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

&lt;p&gt;The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People&amp;#8217;s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2018 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.&lt;/p&gt;

scholarly journals The Sensitivity of Latent Heat Flux to Changes in the Radiative Forcing: A Framework for Comparing Models and Observations

2010 ◽  
Vol 23 (9) ◽  
pp. 2345-2356 ◽  
Author(s):  
Jonathan M. Winter ◽  
Elfatih A. B. Eltahir
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Radiative Forcing ◽  
Climate Model ◽  
Regional Climate ◽  
Surface Model ◽  
Transfer Scheme ◽  
Available Energy

Abstract A climate model must include an accurate surface physics scheme in order to examine the interactions between the land and atmosphere. Given an increase in the surface radiative forcing, the sensitivity of latent heat flux to available energy plays an important role in determining the energy budget and has a significant impact on the response of surface temperature. The Penman–Monteith equation is used to construct a theoretical framework for evaluating the climatology of evapotranspiration and the sensitivity of latent heat flux to available energy. Regional Climate Model version 3 coupled to Integrated Biosphere Simulator (RegCM3–IBIS); RegCM3 with its native land surface model, Biosphere–Atmosphere Transfer Scheme 1e (RegCM3–BATS1e); and Flux Network (FLUXNET) micrometeorological tower observations are compared and contrasted using the developed methodology. RegCM3–IBIS and RegCM3–BATS1e simulate the observed sensitivity of latent heat flux to available energy reasonably well during the summer on average; however, there are significant variations in the monthly values. Additional information provided by the physically based Penman–Monteith framework is employed for identifying deficiencies and guiding improvements in models, allowing calibration of both the climatology of evapotranspiration and the sensitivity of latent heat flux to available energy.

scholarly journals Updated cloud physics improve the modelled near surface climate of Antarctica of a regional atmospheric climate model

2013 ◽  
Vol 7 (4) ◽  
pp. 3231-3260
Author(s):  
J. M. van Wessem ◽  
C. H. Reijmer ◽  
J. T. M. Lenaerts ◽  
W. J. van de Berg ◽  
M. R. van den Broeke ◽  
...  
Keyword(s):  
Heat Flux ◽  
Climate Model ◽  
Sensible Heat Flux ◽  
Longwave Radiation ◽  
Radiative Flux ◽  
Sensible Heat ◽  
Near Surface ◽  
Surface Climate ◽  
Downward Longwave Radiation ◽  
Regional Atmospheric Climate Model

Abstract. The physics package of the polar version of the regional atmospheric climate model RACMO2 has been updated from RACMO2.1 to RACMO2.3. The update constitutes, amongst others, the inclusion of a parameterization for cloud ice super-saturation, an improved turbulent and radiative flux scheme and a changed cloud scheme. In this study the effects of these changes on the modelled near-surface climate of Antarctica are presented. Significant biases remain, but overall RACMO2.3 better represents the near-surface climate in terms of the modelled surface energy balance, based on a comparison with > 750 months of data from nine automatic weather stations located in East Antarctica. Especially the representation of the sensible heat flux and net longwave radiative flux has improved with a decrease in biases of up to 40 %. These improvements are mainly caused by the inclusion of ice super-saturation, which has led to more moisture being transported onto the continent, resulting in more and optically thicker clouds and more downward longwave radiation. As a result, modelled surface temperatures have increased and the bias, when compared to 10 m snow temperatures from 64 ice core observations, has decreased from −2.3 K to −1.3 K. The weaker surface temperature inversion consequently improves the representation of the sensible heat flux, whereas wind speed remains unchanged.

Sign in / Sign up

Export Citation Format

Share Document