The Role of Soil Properties on Regional Climate Simulations

2020 ◽  
Author(s):  
E. Hugo Berbery ◽  
Eli Dennis
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Great Plains ◽  
Soil Texture ◽  
Land Surface ◽  
Hydraulic Properties ◽  
Regional Climate ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Sensible Heat

<p>The land surface is inextricably linked to the atmospheric circulation as it dictates the location and strength of land surface-atmosphere (LA) coupling mechanisms. In this context, soil hydraulic properties are critical to estimate sub-surface processes and fluxes at the surface.  In most numerical weather and climate models, those properties are assigned through maps of soil texture complemented with look-up tables.  Then, the hydraulic properties are used in a large variety of process parameterizations within the models.  In this study, we investigate the sensitivity of the simulated regional climate to changes in the prescribed soil maps in the WRF/CLM4 modeling suite.  Comparison of two widely used soil texture databases, the USGS State Soil Geographic Database (STATSGO) and Beijing Normal University’s soil texture database (GSDE), over the United States and Central America reveals that only 32% of soil texture classifications are in common. Further, the differences are not random but tend to depict small-to-large spatial patterns with a preponderance of either finer or coarser grains. Over North America, the US Great Plains have finer grains in GSDE than in STATSGO, while the opposite is true over Central Mexico.</p><p> </p><p>Seasonal simulations were carried out to assess the changes in the soil-water system that result from changing the soil types (GSDE vs. STATSGO) and their corresponding hydraulic properties. Wherever GSDE has finer grains than STATSGO (e.g., over the US Great Plains), the soil will retain water more strongly as evidenced by smaller latent heat fluxes and larger sensible heat flux. On the other hand, areas of coarser grains in GSDE (e.g., over central Mexico) exhibit an increase in latent heat fluxes and a corresponding decrease in sensible heat flux. Regions with an increase/decrease in latent heat flux have a corresponding increase/decrease in the 2-m moisture content. Similar relations are obtained between sensible heat flux and 2-m temperature. These changes also affect the atmospheric column, which responds with an increase/decrease of temperature and height of the planetary boundary layer. Changes in the vertical structure induce changes in the vertical instability and winds. Interestingly, the chain of modifications resulting from soil texture changes impact the moisture fluxes, and more generally, the atmospheric water budget.</p>

scholarly journals Estimation of Land Surface Heat Fluxes Based on Landsat 7 ETM+ Data and Field Measurements over the Northern Tibetan Plateau

2019 ◽  
Vol 11 (24) ◽  
pp. 2899
Author(s):  
Nan Ge ◽  
Lei Zhong ◽  
Yaoming Ma ◽  
Meilin Cheng ◽  
Xian Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Land Surface Heat Fluxes

Land surface heat fluxes consist of the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. The estimation of these fluxes is essential to the study of energy transfer in land–atmosphere systems. In this paper, Landsat 7 ETM+ SLC-on data were applied to estimate the land surface heat fluxes on the northern Tibetan Plateau using the SEBS (surface energy balance system) model, in combination with the calculation of field measurements at CAMP/Tibet (Coordinated Enhanced Observing Period (CEOP) Asia–Australia Monsoon Project on the Tibetan Plateau) automatic weather stations based on the combinatory method (CM) for comparison. The root mean square errors between the satellite estimations and the CM calculations for the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux were 49.2 W/m2, 46.3 W/m2, 68.2 W/m2, and 54.9 W/m2, respectively. The results reveal that land surface heat fluxes all present significant seasonal variability. Apart from the sensible heat flux, the satellite-estimated net radiation flux, soil heat flux, and latent heat flux exhibited a trend of summer > spring > autumn > winter. In summer, spring, autumn, and winter, respectively, the median values of the net radiation flux (631.8 W/m2, 583.0 W/m2, 404.4 W/m2, 314.3 W/m2), soil heat flux (40.9 W/m2, 37.9 W/m2, 26.1 W/m2, 20.5 W/m2), sensible heat flux (252.7 W/m2, 219.5 W/m2, 221.4 W/m2, 204.8 W/m2), and latent heat flux (320.1 W/m2, 298.3 W/m2, 142.3 W/m2, 75.5 W/m2) exhibited distinct seasonal diversity. From November to April, the in situ sensible heat flux is higher than the latent heat flux; the opposite is true between June and September, leaving May and October as transitional months. For water bodies, alpine meadows and other main underlying surface types, sensible and latent heat flux generally present contrasting and complementary spatial distributions. Due to the 15–60 m resolution of the Landsat 7 ETM+ data, the distribution of land surface heat fluxes can be used as an indicator of complex underlying surface types over the northern Tibetan Plateau.

The Effect of Soil on the Summertime Surface Energy Budget of a Humid Subarctic Tundra in Northern Quebec, Canada

2021 ◽  
Vol 22 (10) ◽  
pp. 2547-2564
Author(s):  
Georg Lackner ◽  
Daniel F. Nadeau ◽  
Florent Domine ◽  
Annie-Claude Parent ◽  
Gonzalo Leonardini ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Arctic Region ◽  
Heat Fluxes ◽  
Surface Energy Budget ◽  
Turbulent Heat ◽  
Turbulent Heat Fluxes

AbstractRising temperatures in the southern Arctic region are leading to shrub expansion and permafrost degradation. The objective of this study is to analyze the surface energy budget (SEB) of a subarctic shrub tundra site that is subject to these changes, on the east coast of Hudson Bay in eastern Canada. We focus on the turbulent heat fluxes, as they have been poorly quantified in this region. This study is based on data collected by a flux tower using the eddy covariance approach and focused on snow-free periods. Furthermore, we compare our results with those from six Fluxnet sites in the Arctic region and analyze the performance of two land surface models, SVS and ISBA, in simulating soil moisture and turbulent heat fluxes. We found that 23% of the net radiation was converted into latent heat flux at our site, 35% was used for sensible heat flux, and about 15% for ground heat flux. These results were surprising considering our site was by far the wettest site among those studied, and most of the net radiation at the other Arctic sites was consumed by the latent heat flux. We attribute this behavior to the high hydraulic conductivity of the soil (littoral and intertidal sediments), typical of what is found in the coastal regions of the eastern Canadian Arctic. Land surface models overestimated the surface water content of those soils but were able to accurately simulate the turbulent heat flux, particularly the sensible heat flux and, to a lesser extent, the latent heat flux.

scholarly journals Comparison of turbulent structures and energy fluxes over exposed and debris-covered glacier ice

2020 ◽  
Vol 66 (258) ◽  
pp. 543-555 ◽  
Author(s):  
Lindsey Nicholson ◽  
Ivana Stiperski
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Similarity Theory ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Temperature Fields ◽  
Sensible Heat ◽  
Energy Fluxes ◽  
Glacier Surface ◽  
Debris Cover

AbstractWe present the first direct comparison of turbulence conditions measured simultaneously over exposed ice and a 0.08 m thick supraglacial debris cover on Suldenferner, a small glacier in the Italian Alps. Surface roughness, sensible heat fluxes (~20–50 W m−2), latent heat fluxes (~2–10 W m−2), topology and scale of turbulence are similar over both glacier surface types during katabatic and synoptically disturbed conditions. Exceptions are sunny days when buoyant convection becomes significant over debris-covered ice (sensible heat flux ~ −100 W m−2; latent heat flux ~ −30 W m−2) and prevailing katabatic conditions are rapidly broken down even over this thin debris cover. The similarity in turbulent properties implies that both surface types can be treated the same in terms of boundary layer similarity theory. The differences in turbulence between the two surface types on this glacier are dominated by the radiative and thermal contrasts, thus during sunny days debris cover alters both the local surface turbulent energy fluxes and the glacier component of valley circulation. These variations under different flow conditions should be accounted for when distributing temperature fields for modeling applications over partially debris-covered glaciers.

scholarly journals Evaluation of functional properties of various types of vegetation cover using remotely sensed data analysis

2010 ◽  
Vol 4 (Special Issue 2) ◽  
pp. S49-S58 ◽  
Author(s):  
J. Brom ◽  
J. Procházka ◽  
A. Rejšková
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Hydrological Cycle ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Remotely Sensed Data ◽  
Mean Values

The dissipation of solar energy and consequently the formation of the hydrological cycle are largely dependent on the structural and optical characteristics of the land surface. In our study, we selected seven units with different types of vegetation in the Mlýnský and Horský catchments (South-Eastern part of the Šumava Mountains, Czech Republic) for the assessment of the differences in their functioning expressed through the surface temperature, humidity, and energy dissipation. For our analyses, we used Landsat 5 TM satellite data from June 25<SUP>th</SUP>, 2008. The results showed that the microclimatic characteristics and energy fluxes varied in different units according to their vegetation characteristics. A cluster analysis of the mean values was used to divide the vegetation units into groups according to their functional characteristics. The mown meadows were characterised by the highest surface temperature and sensible heat flux and the lowest humidity and latent heat flux. On the contrary, the lowest surface temperature and sensible heat flux and the highest humidity and latent heat flux were found in the forest. Our results showed that the climatic and energetic features of the land surface are related to the type of vegetation. We state that the spatial distribution of different vegetation units and the amount of biomass are crucial variables influencing the functioning of the landscape.

The progress on the observation and modeling of surface heat fluxes and evapotranspiration over heterogeneous landscapes of the Third Pole region

2020 ◽  
Author(s):  
Yaoming Ma
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

&lt;p&gt;The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People&amp;#8217;s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2016 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.&lt;/p&gt;

scholarly journals A New Technique to Estimate Sensible Heat Fluxes around Micrometeorological Towers Using Small Unmanned Aircraft Systems

2017 ◽  
Vol 34 (9) ◽  
pp. 2103-2112 ◽  
Author(s):  
Temple R. Lee ◽  
Michael Buban ◽  
Edward Dumas ◽  
C. Bruce Baker
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Spatial Scales ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Unmanned Aircraft ◽  
Unmanned Aircraft Systems ◽  
Sensible Heat ◽  
Aircraft Systems ◽  
Convection Initiation

AbstractUpscaling point measurements from micrometeorological towers is a challenging task that is important for a variety of applications, for example, in process studies of convection initiation, carbon and energy budget studies, and the improvement of model parameterizations. In the present study, a technique was developed to determine the horizontal variability in sensible heat flux H surrounding micrometeorological towers. The technique was evaluated using 15-min flux observations, as well as measurements of land surface temperature and air temperature obtained from small unmanned aircraft systems (sUAS) conducted during a one-day measurement campaign. The computed H was found to be comparable to the micrometeorological measurements to within 5–10 W m−2. Furthermore, when comparing H computed using this technique with H determined using large-eddy simulations (LES), differences of <10 W m−2 were typically found. Thus, implementing this technique using observations from sUAS will help determine sensible heat flux variability at horizontal spatial scales larger than can be provided from flux tower measurements alone.

Observed Impact of Atmospheric Aerosols on the Surface Energy Budget

2013 ◽  
Vol 17 (14) ◽  
pp. 1-22 ◽  
Author(s):  
Allison L. Steiner ◽  
Dori Mermelstein ◽  
Susan J. Cheng ◽  
Tracy E. Twine ◽  
Andrew Oliphant
Keyword(s):  
Heat Flux ◽  
Surface Energy ◽  
Latent Heat ◽  
Atmospheric Aerosols ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Energy Budget ◽  
Environmental Drivers ◽  
Sensible Heat

Abstract Atmospheric aerosols scatter and potentially absorb incoming solar radiation, thereby reducing the total amount of radiation reaching the surface and increasing the fraction that is diffuse. The partitioning of incoming energy at the surface into sensible heat flux and latent heat flux is postulated to change with increasing aerosol concentrations, as an increase in diffuse light can reach greater portions of vegetated canopies. This can increase photosynthesis and transpiration rates in the lower canopy and potentially decrease the ratio of sensible to latent heat for the entire canopy. Here, half-hourly and hourly surface fluxes from six Flux Network (FLUXNET) sites in the coterminous United States are evaluated over the past decade (2000–08) in conjunction with satellite-derived aerosol optical depth (AOD) to determine if atmospheric aerosols systematically influence sensible and latent heat fluxes. Satellite-derived AOD is used to classify days as high or low AOD and establish the relationship between aerosol concentrations and the surface energy fluxes. High AOD reduces midday net radiation by 6%–65% coupled with a 9%–30% decrease in sensible and latent heat fluxes, although not all sites exhibit statistically significant changes. The partitioning between sensible and latent heat varies between ecosystems, with two sites showing a greater decrease in latent heat than sensible heat (Duke Forest and Walker Branch), two sites showing equivalent reductions (Harvard Forest and Bondville), and one site showing a greater decrease in sensible heat than latent heat (Morgan–Monroe). These results suggest that aerosols trigger an ecosystem-dependent response to surface flux partitioning, yet the environmental drivers for this response require further exploration.

scholarly journals Energy balance in a renewal sugarcane area with fallow period and soybean cultivation

2020 ◽  
Vol 42 ◽  
pp. e39
Author(s):  
Rubmara Ketzer Oliveira ◽  
Luciano Sobral Fraga Junior ◽  
Larissa Brêtas Moura ◽  
Debora Regina Roberti ◽  
Felipe Gustavo Pilau
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Rainfall Regime ◽  
Sensible Heat ◽  
Energy Fluxes ◽  
Fallow Period

Brazil is the main sugarcane producer in the world, which is intended for various purposes, from food to power generation. Soybean cultivation in areas of sugarcane under renewal has been growing progressively in Brazil. Quantifying energy fluxes at different stages of this process is essential for better management. The work was carried out in Piracicaba city, with the objective of analyzing the behavior of energy fluxes and the closing of the energy balance in a sugarcane renewal area with a fallow period followed by soybean cultivation. The latent and sensitive heat fluxes were obtained with the “Eddy covariance” method. The closing of the energy balance in the fallow period with straw-covered uncovered and soybean-cultivated soil presented a correlation coefficient of 0.88, 0.78 and 0.71, respectively. In the period without cultivation, the sensible heat flux was predominant in relation to the latent heat flux, varying according to the rainfall regime. The presence of straw under the soil in the fallow period affected the latent heat flux. With soybean cultivation, the latent heat flux surpassed the sensible heat flux.

scholarly journals Fetch Effect on Flux-Variance Estimations of Sensible and Latent Heat Fluxes of Camellia Sinensis

Atmosphere ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 299
Author(s):  
Noman Ali Buttar ◽  
Hu Yongguang ◽  
Josef Tanny ◽  
M Waqar Akram ◽  
Abdul Shabbir
Keyword(s):  
Heat Flux ◽  
Eddy Covariance ◽  
Latent Heat ◽  
Sensible Heat Flux ◽  
Soil Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Effect Of Temperature ◽  
Sensible Heat ◽  
Fine Wire

Precise estimation of surface-atmosphere exchange is a major challenge in micrometeorology. Previous literature presented the eddy covariance (EC) as the most reliable method for the measurements of such fluxes. Nevertheless, the EC technique is quite expensive and complex, hence other simpler methods are sought. One of these methods is Flux-Variance (FV). The FV method estimates sensible heat flux (H) using high frequency (~10Hz) air temperature measurements by a fine wire thermocouple. Additional measurements of net radiation (Rn) and soil heat flux (G) allow the derivation of latent heat flux (LE) as the residual of the energy balance equation. In this study, the Flux Variance method was investigated, and the results were compared against eddy covariance measurements. The specific goal of the present study was to assess the performance of the FV method for the estimation of surface fluxes along a variable fetch. Experiment was carried out in a tea garden; an EC system measured latent and sensible heat fluxes and five fine-wire thermocouples were installed towards the wind dominant direction at different distances (fetch) of TC1 = 170 m, TC2 = 165 m, TC3 = 160 m, TC4 = 155 m and TC5 = 150 m from the field edge. Footprint analysis was employed to examine the effect of temperature measurement position on the ratio between 90% footprint and measurement height. Results showed a good agreement between FV and EC measurements of sensible heat flux, with all regression coefficients (R2) larger than 0.6; the sensor at 170 m (TC1), nearest to the EC system, had highest R2 = 0.86 and lowest root mean square error (RMSE = 25 Wm−2). The estimation of LE at TC1 was also in best agreement with eddy covariance, with the highest R2 = 0.90. The FV similarity constant varied along the fetch within the range 2.2–2.4.

Study on the Land-Atmosphere Interaction in the Coordination Effect of Westerly Wind and Monsoon

2021 ◽  
Author(s):  
Maoshan Li ◽  
Lingzhi Wang ◽  
Wei Fu ◽  
Ming Gong ◽  
Na Chang
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Wind Direction ◽  
Wind Field ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Specific Humidity ◽  
Sensible Heat ◽  
Mount Everest ◽  
Convective Boundary

&lt;p&gt;&lt;strong&gt;&lt;sup&gt;&amp;#160;&lt;/sup&gt;&lt;/strong&gt;&lt;sup&gt;Different underlying surfaces have differing diversities, complex compositions and uneven distributions and contribute to diverse and complex land surfaces. As the main input factor for atmospheric energy, the surface greatly affects the various interactions between the ground and the atmosphere and even plays a key role in local areas on the Tibetan Plateau. The characteristics of the atmospheric boundary layer structure of the plateau and the land-atmosphere interaction under the control of different wind fields in the south branch of the westerly wind and the plateau monsoon are discussed. Results show that the height of the atmospheric boundary layer at each station under the westerly south branch wind field is higher than that under the summer monsoon wind field. The height of the convective boundary layers of Mount Everest, Nyingchi, Nagqu and Shiquan River in the southwest wind field are 3250 m, 2250 m, 2760 m and 3500 m. while the height of the convective boundary layers of Mount Everest, Nyingchi, Nagqu and Shiquan River under the plateau monsoon field are 2000 m, 2100 m, 1650 m and 2000 m. The specific humidity of the surface layer at all site is larger on July than it on other months. The specific humidity of the surface layer in Linzhi area is larger than that of the other three regions, and it reaches 12.88 g&amp;#183;kg-1 at the maximum. The wind direction on Mount Everest over 1200 m is dominated by westerly winds in May and October. The wind direction on Nyingchi above 1500 m is dominated by westerly winds in May and October, and in July, winds above 1200 m is dominated by southerly winds. The wind direction of Shiquan River in May and October is dominated by west-southwest wind, and the wind direction of Shiquan River in July is dominated by west-northwest wind. Secondly, variation characteristics of surface fluxes were analyzed by using the eddy covariance observations from four stations of Pailong(entrance of Canyon), Danka (middle of Canyon), Kabu (end of Canyon) , and Motuo (end of Canyon) in the southeastern gorge area of Tibet. The changing trend of monthly averaged daily sensible heat flux at Kabu station is fluctuating. Sensible heat flux and latent heat flux at Motuo station have the same variation characteristics. Latent heat fluxes increase first and then decrease at all four stations. Seasonal variations of soil heat flux are obvious, characterizing positive values in spring and summer and negative values in autumn and winter. The diurnal variation intensity of net radiation flux is summer&gt;spring&gt;autumn&gt;winter.&amp;#160; &amp;#160;Energy closure rates of Danka, Pailong, Motuo, and Kabu stations are 70.86%, 68.91%, 69.29%, and 67.23%, respectively. Latent heat fluxes and soil heat fluxes increase, and sensible heat fluxes decrease as increasing precipitation at the four stations. The sensible heat flux and soil heat flux respond synchronously to precipitation changes, and the changes in latent heat have a significant lag in response to precipitation changes.&lt;/sup&gt;&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document