The Different Nature of the Interdecadal Variability of the Thermohaline Circulation under Mixed and Flux Boundary Conditions

2006 ◽  
Vol 36 (9) ◽  
pp. 1703-1718 ◽  
Author(s):  
Olivier Arzel ◽  
Thierry Huck ◽  
Alain Colin de Verdière

Abstract The differences between the interdecadal variability under mixed and constant flux boundary conditions are investigated using a coarse-resolution ocean model in an idealized flat-bottom single-hemisphere basin. Objective features are determined that allow one type of oscillation to be distinguished versus the other. First, by performing a linear stability analysis of the steady state obtained under restoring boundary conditions, it is shown that the interdecadal variability under constant flux and mixed boundary conditions arises, respectively, from the instability of a linear mode around the mean stratification and circulation and from departure from the initial state. Based on the budgets of density variance, it is shown next that the two types of oscillations have different energy sources: Under the constant-flux boundary condition (the thermal mode), the downgradient meridional eddy heat flux in the western boundary current regions sustains interdecadal variability, whereas under mixed boundary conditions (the salinity mode), a positive feedback between convective adjustment and restoring surface heat flux is at the heart of the existence of the decadal oscillation. Furthermore, the positive correlations between temperature and salinity anomalies in the forcing layer are shown to dominate the forcing of density variance. In addition, the vertical structure of perturbations reveals vertical phase lags at different depths in all tracer fields under constant flux, while under mixed boundary conditions only the temperature anomalies show a strong dipolar structure. The authors propose that these differences will allow one to identify which type of oscillation, if any, is at play in the more exhaustive climate models.

Author(s):  
Thomas B. Gradinger ◽  
T. Laneryd

Natural-convection cooling with oil or other fluids of high Prandtl number plays an important role in many technical applications such as transformers or other electric equipment. For design and optimization, one-dimensional (1D) flow models are of great value. A standard configuration in such models is flow between vertical parallel plates. Accurate modeling of heat transfer, buoyancy, and pressure drop for this configuration is therefore of high importance but gets challenging as the influence of buoyancy rises. For increasing ratio of Grashof to Reynolds number, the accuracy of one-dimensional models based on the locally forced-flow assumption drops. In the present work, buoyancy corrections for use in one-dimensional models are developed and verified. Based on two-dimensional (2D) simulations of buoyant flow using finite-element solver COMSOL Multiphysics, corrections are derived for the local Nusselt number, the local friction coefficient, and a parameter relating velocity-weighted and volumetric mean temperature. The corrections are expressed in terms of the ratio of local Grashof to Reynolds number and a normalized distance from the channel inlet, both readily available in a one-dimensional model. The corrections universally apply to constant wall temperature, constant wall heat flux, and mixed boundary conditions. The developed correlations are tested against two-dimensional simulations for a case of mixed boundary conditions and are found to yield high accuracy in temperature, wall heat flux, and wall shear stress. An application example of a natural-convection loop with two finned heat exchangers shows the influence on mass-flow rate and top-to-bottom temperature difference.


2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Eva Llabrés

Abstract We find the most general solution to Chern-Simons AdS3 gravity in Fefferman-Graham gauge. The connections are equivalent to geometries that have a non-trivial curved boundary, characterized by a 2-dimensional vielbein and a spin connection. We define a variational principle for Dirichlet boundary conditions and find the boundary stress tensor in the Chern-Simons formalism. Using this variational principle as the departure point, we show how to treat other choices of boundary conditions in this formalism, such as, including the mixed boundary conditions corresponding to a $$ T\overline{T} $$ T T ¯ -deformation.


2003 ◽  
Vol 33 (4) ◽  
pp. 860-866 ◽  
Author(s):  
A.C. Aguiar Pinto ◽  
T.M. Britto ◽  
R. Bunchaft ◽  
F. Pascoal ◽  
F.S.S. da Rosa

Sign in / Sign up

Export Citation Format

Share Document