scholarly journals The Role of Averaging for Improving Sea Surface Salinity Retrieval from the Soil Moisture and Ocean Salinity (SMOS) Satellite and Impact of Auxiliary Data

2007 ◽  
Vol 24 (2) ◽  
pp. 255-269 ◽  
Author(s):  
Sabine Philipps ◽  
Christine Boone ◽  
Estelle Obligis
Keyword(s):  
Soil Moisture ◽  
Sensitivity Study ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Auxiliary Data ◽  
Additional Information ◽  
Ocean Salinity

Abstract Soil Moisture and Ocean Salinity (SMOS) was chosen as the European Space Agency’s second Earth Explorer Opportunity mission. One of the objectives is to retrieve sea surface salinity (SSS) from measured brightness temperatures (TBs) at L band with a precision of 0.2 practical salinity units (psu) with averages taken over 200 km by 200 km areas and 10 days [as suggested in the requirements of the Global Ocean Data Assimilation Experiment (GODAE)]. The retrieval is performed here by an inverse model and additional information of auxiliary SSS, sea surface temperature (SST), and wind speed (W). A sensitivity study is done to observe the influence of the TBs and auxiliary data on the SSS retrieval. The key role of TB and W accuracy on SSS retrieval is verified. Retrieval is then done over the Atlantic for two cases. In case A, auxiliary data are simulated from two model outputs by adding white noise. The more realistic case B uses independent databases for reference and auxiliary ocean parameters. For these cases, the RMS error of retrieved SSS on pixel scale is around 1 psu (1.2 for case B). Averaging over GODAE scales reduces the SSS error by a factor of 12 (4 for case B). The weaker error reduction in case B is most likely due to the correlation of errors in auxiliary data. This study shows that SSS retrieval will be very sensitive to errors on auxiliary data. Specific efforts should be devoted to improving the quality of auxiliary data.

scholarly journals Assessing Coastal SMAP Surface Salinity Accuracy and Its Application to Monitoring Gulf of Maine Circulation Dynamics

2018 ◽  
Vol 10 (8) ◽  
pp. 1232 ◽  
Author(s):  
Semyon Grodsky ◽  
Douglas Vandemark ◽  
Hui Feng
Keyword(s):  
Soil Moisture ◽  
Gulf Of Maine ◽  
Contamination Factor ◽  
Early Spring ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Sensor Sensitivity ◽  
Ocean Salinity ◽  
Circulation Dynamics

Monitoring the cold and productive waters of the Gulf of Maine and their interactions with the nearby northwestern (NW) Atlantic shelf is important but challenging. Although remotely sensed sea surface temperature (SST), ocean color, and sea level have become routine, much of the water exchange physics is reflected in salinity fields. The recent invention of satellite salinity sensors, including the Soil Moisture Active Passive (SMAP) radiometer, opens new prospects in regional shelf studies. However, local sea surface salinity (SSS) retrieval is challenging due to both cold SST limiting salinity sensor sensitivity and proximity to land. For the NW Atlantic, our analysis shows that SMAP SSS is subject to an SST-dependent bias that is negative and amplifies in winter and early spring due to the SST-related drop in SMAP sensor sensitivity. On top of that, SMAP SSS is subject to a land contamination bias. The latter bias becomes noticeable and negative when the antenna land contamination factor (LC) exceeds 0.2%, and attains maximum negative values at LC = 0.4%. Coastward of LC = 0.5%, a significant positive land contamination bias in absolute SMAP SSS is evident. SST and land contamination bias components are seasonally dependent due to seasonal changes in SST/winds and terrestrial microwave properties. Fortunately, it is shown that SSS anomalies computed relative to a satellite SSS climatology can effectively remove such seasonal biases along with the real seasonal cycle. SMAP monthly SSS anomalies have sufficient accuracy and applicability to extend nearer to the coasts. They are used to examine the Gulf of Maine water inflow, which displayed important water intrusions in between Georges Banks and Nova Scotia in the winters of 2016/17 and 2017/18. Water intrusion patterns observed by SMAP are generally consistent with independent measurements from the European Soil Moisture Ocean Salinity (SMOS) mission. Circulation dynamics related to the 2016/2017 period and enhanced wind-driven Scotian Shelf transport into the Gulf of Maine are discussed.

Colder and smaller : 10 years of observations of surface salinity by SMOS, Aquarius and SMAP to study mesoscale eddies in the Southern Ocean

2020 ◽  
Author(s):  
Audrey Hasson ◽  
Cori Pegliasco ◽  
Jacqueline Boutin ◽  
Rosemary Morrow
Keyword(s):  
Soil Moisture ◽  
Southern Ocean ◽  
European Space Agency ◽  
Mesoscale Eddy ◽  
Mesoscale Eddies ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Sst Anomalies

<p>Since 2010, space missions dedicated to Sea Surface Salinity (SSS) have been providing observations with almost complete coverage of the global ocean and a resolution of about 45 km every 3 days. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission was the first orbiting radiometer to collect regular SSS observations from space. The Aquarius and SMAP (Soil Moisture Active-Passive) missions of the National Aeronautics and Space Administration (NASA) then reinforced the SSS observing system between mid-2011 and mid-2015 and since mid-2015, respectively.</p><p>Using the most recent SSS Climate Change Initiative project dataset merging data from the 3 missions, this study investigates the SSS signal associated with mesoscale eddies in the Southern Ocean. Eddies location and characteristics are obtained from the daily v3 mesoscale eddy trajectory atlas produced by CLS. SSS anomalies along the eddies journey are computed and compared to Sea Surface Temperature (SST) anomalies (v4 Remote Sensing Systems) as well as the SubAntarctic Front (SAF) position (CTOH, LEGOS). The vertical structure of the eddies is further investigated using profiles from colocated Argo autonomous floats.<span> </span></p><p>This study highlights a robust signal in SSS depending on both the eddies rotation (cyclone/anticyclone) and latitudinal position with respect to the SAF. Moreover, this dependence is not found in SST. These observations reveal oceanic the interaction of eddies with the larger scale ocean water masses. SSS and SST anomalies composites indeed show different patterns either bi-poles linked with horizontal stirring of fronts, mono-poles from trapping water or vertical mixing changes, or a mix of the two.</p><p>This analysis gives strong hints for the erosion of subsurface waters, such as mode waters, induced by enhanced mixing caused by the deep-reaching eddies of the southern ocean.</p>

Validation and correction of sea surface salinity retrieval from SMAP

2020 ◽  
Author(s):  
Sisi Qin
Keyword(s):  
Soil Moisture ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Tropical Regions ◽  
Ocean Salinity ◽  
Forecast Models ◽  
Level 3

<p>In this study, Sea Surface Salinity (SSS) Level 3 (L3) daily product derived from Soil Moisture Active Passive (SMAP) during the year 2016, was validated and compared with SSS daily products derived from Soil Moisture and Ocean Salinity (SMOS) and in-situ measurements. Generally, the Root Mean Square Error (RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the Sea Surface Temperature (SST).Then, aregression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.</p>

scholarly journals Sea Surface Salinity with SMOS

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Mulyadi Abdul Wahid
Keyword(s):  
Soil Moisture ◽  
Microwave Radiometer ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Normal Operation ◽  
Surface Salinity ◽  
Processing Centre ◽  
Ocean Salinity ◽  
Long Time ◽  
A New Technique

The mission to observe the Sea Surface Salinity (SSS) from the space is not really new because it has been started from long time ago. The first mission was the Skylab which used a 1.4 GHz microwave radiometer in 1970’s. But this mission is still not as comprehensive as other missions which observe such as Sea Surface Temperature (SST), Sea Surface Height (SSH), Ocean Color, and so on. Realizing the importance of SSS distribution in the ocean and its influences to the Earth’s climate system has motivated the scientists to develop a new technique in observing the SSS from space and lead a mission called the SMOS mission which was launched in November 2, 2011. Besides observing the SSS, this mission observes the Soil Moisture as well. The Soil Moisture and Ocean Salinity (SMOS) mission aims to obtain global and regular measurements on the soil moisture and the ocean salinity. These measurements are essential for climate and hydrological models, among other purposes. SMOS payload is a L band (21 cm, 1.4 GHz) 2D interferometric radiometer on a generic Proteus platform. The mission lifetime is at least 3 years (0.5 for commissioning and 2.5 for normal operation) + 2 years (extended operation) + 10 years for the post-mission processing. Raw physical data, level 1 and level 2 products will be produced by the PDPC (SMOS Payload Data and Processing Centre). It is an ESA center located in Villafranca (Spain) and operated under the responsibility of ESA. The SMOS Ocean Salinity objective is accuracy better than 0.1 psu, with 10 days to monthly grid scale (200 km).

scholarly journals Global Analysis of Coastal Gradients of Sea Surface Salinity

2021 ◽  
Vol 13 (13) ◽  
pp. 2507
Author(s):  
Alina N. Dossa ◽  
Gaël Alory ◽  
Alex Costa da Silva ◽  
Adeola M. Dahunsi ◽  
Arnaud Bertrand
Keyword(s):  
Soil Moisture ◽  
Water Cycle ◽  
Global Analysis ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Coastal Processes ◽  
In Situ Observation ◽  
Surface Salinity ◽  
Ocean Salinity ◽  
Satellite Missions

Sea surface salinity (SSS) is a key variable for ocean–atmosphere interactions and the water cycle. Due to its climatic importance, increasing efforts have been made for its global in situ observation, and dedicated satellite missions have been launched more recently to allow homogeneous coverage at higher resolution. Cross-shore SSS gradients can bear the signature of different coastal processes such as river plumes, upwelling or boundary currents, as we illustrate in a few regions. However, satellites performances are questionable in coastal regions. Here, we assess the skill of four gridded products derived from the Soil Moisture Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellites and the GLORYS global model reanalysis at capturing cross-shore SSS gradients in coastal bands up to 300 km wide. These products are compared with thermosalinography (TSG) measurements, which provide continuous data from the open ocean to the coast along ship tracks. The comparison shows various skills from one product to the other, decreasing as the coast gets closer. The bias in reproducing coastal SSS gradients is unrelated to how the SSS biases evolve with the distance to the coast. Despite limited skill, satellite products generally agree better with collocated TSG data than a global reanalysis and show a large range of coastal SSS gradients with different signs. Moreover, satellites reveal a global dominance of coastal freshening, primarily related to river runoff over shelves. This work shows a great potential of SSS remote sensing to monitor coastal processes, which would, however, require a jump in the resolution of future SSS satellite missions to be fully exploited.

scholarly journals Improved Multifractal Fusion Method to Blend SMOS Sea Surface Salinity Based on Semiparametric Weight Function

2019 ◽  
Vol 36 (8) ◽  
pp. 1501-1520 ◽  
Author(s):  
Hengqian Yan ◽  
Ren Zhang ◽  
Gongjie Wang ◽  
Huizan Wang ◽  
Jian Chen ◽  
...  
Keyword(s):  
Weight Function ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Weight Functions ◽  
Fusion Method ◽  
Surface Salinity ◽  
In Situ Data ◽  
Ocean Salinity ◽  
Rossby Radius Of Deformation

AbstractThe multifractal fusion method has proved to be an effective algorithm to mitigate the noise of the sea surface salinity (SSS) of Soil Moisture Ocean Salinity (SMOS) mission. However, the traditional nonparametric weight function used in this method is unable to fully capture the dynamic evolution of the oceanic environment. Considering the multiscale, nonuniform, anisotropic, and flow-dependent nature of the ocean, a prototype with the so-called flexible circle (FLC) weight function or flexible ellipse (FLE) weight function with a set of predefined parameters is proposed in this paper. The improved weight functions could draw dynamic information from the sea surface temperature, Rossby radius of deformation, and surface geostrophic flow to improve the quality of the remotely sensed SSS. The validation against the in situ data indicates that the improved weight functions perform better than the traditional one with a reduced root-mean-square (RMS) and standard deviation (STD) of the differences with respect to EN 4.2.0 profiles (from 0.50 and 0.46 to 0.42 and 0.38 for FLC and 0.39 and 0.36 for FLE in the global ocean). In particular, the FLE scheme could highlight the variation of the strong currents without affecting the computational efficiency. Furthermore, this paper discusses the influences of the error distribution on the fusion results and underlines the importance of error-based adaptions for further improvements.

Sign in / Sign up

Export Citation Format

Share Document