scholarly journals Raman Spectroscopy Coupled with Reflectance Spectroscopy as a Tool for the Characterization of Key Hydrothermal Alteration Minerals in Epithermal Au–Ag Systems: Utility and Implications for Mineral Exploration

2021 ◽  
pp. 000370282110478
Author(s):  
Carlos Arbiol ◽  
Graham D. Layne

Raman spectroscopy of fine-grained hydrothermal alteration minerals, and phyllosilicates in particular, presents certain challenges. However, given the increasingly widespread recognition of field portable visible–near infrared–shortwave infrared (Vis-NIR-SWIR) spectroscopy as a valuable tool in the mineral exploration industry, Raman microspectroscopy has promise as an approach for developing detailed complementary information on hydrothermal alteration phases in ore-forming systems. Here we present exemplar high-quality Raman and Vis-NIR-SWIR spectra of four key hydrothermal alteration minerals (pyrophyllite, white mica, chlorite, and alunite) that are common in precious metal epithermal systems, from deposits on the island of Newfoundland, Canada. The results reported here demonstrate that Raman microspectroscopy can accurately characterize pyrophyllite, white mica, chlorite, and alunite and provide details on their compositional variation at the microscale. In particular, spectral differences in the 1000–1150 cm−1 white mica Raman band allows the distinction between low-Tschermak phases (muscovite, paragonite) and phases with higher degrees of Tschermak substitution (phengitic white mica composition). The peak position of the main chlorite Raman band shifts between 683 cm−1 for Mg-rich chlorite and 665 cm−1 for Fe-rich chlorite and can be therefore used for semiquantitative estimation of the Fe2+ content in chlorite. Furthermore, while Vis-NIR-SWIR macrospectroscopy allows the rapid identification of the overall composition of the most abundant hydrothermal alteration mineral in a given sample, Raman microspectroscopy provides an in-depth spectral and chemical characterization of individual mineral grains, preserving the spatial and paragenetic context of each mineral and allowing for the distinction of chemical variation between (and within) different mineral grains. This is particularly useful in the case of alunite, white mica, and chlorite, minerals with extensive solid solution, where microscale characterization can provide information on the alteration zonation useful for mineral exploration and provide insight into mineral deposit genesis.

1995 ◽  
Author(s):  
Michael S. Feld ◽  
Ramasamy Manoharan ◽  
Juha Salenius ◽  
Jacobo Orenstein-Carndona ◽  
Tjeerd J. Roemer ◽  
...  

2002 ◽  
Vol 110 (1280) ◽  
pp. 225-227
Author(s):  
Minoru OSADA ◽  
Masato KAKIHANA ◽  
Ryuji ADACHI ◽  
Takashi ICHIHARA ◽  
Naoto KIJIMA

Micromachines ◽  
2018 ◽  
Vol 9 (7) ◽  
pp. 361 ◽  
Author(s):  
Zongwei Xu ◽  
Zhongdu He ◽  
Ying Song ◽  
Xiu Fu ◽  
Mathias Rommel ◽  
...  

The defects and subsurface damages induced by crystal growth and micro/nano-machining have a significant impact on the functional performance of machined products. Raman spectroscopy is an efficient, powerful, and non-destructive testing method to characterize these defects and subsurface damages. This paper aims to review the fundamentals and applications of Raman spectroscopy on the characterization of defects and subsurface damages in micro/nano-machining. Firstly, the principle and several critical parameters (such as penetration depth, laser spot size, and so on) involved in the Raman characterization are introduced. Then, the mechanism of Raman spectroscopy for detection of defects and subsurface damages is discussed. The Raman spectroscopy characterization of semiconductor materials’ stacking faults, phase transformation, and residual stress in micro/nano-machining is discussed in detail. Identification and characterization of phase transformation and stacking faults for Si and SiC is feasible using the information of new Raman bands. Based on the Raman band position shift and Raman intensity ratio, Raman spectroscopy can be used to quantitatively calculate the residual stress and the thickness of the subsurface damage layer of semiconductor materials. The Tip-Enhanced Raman Spectroscopy (TERS) technique is helpful to dramatically enhance the Raman scattering signal at weak damages and it is considered as a promising research field.


The Analyst ◽  
2014 ◽  
Vol 139 (21) ◽  
pp. 5379-5386 ◽  
Author(s):  
Shiyamala Duraipandian ◽  
Jianhua Mo ◽  
Wei Zheng ◽  
Zhiwei Huang

NIR Raman spectroscopic characterization of cervical precarcinogenic transformation.


1999 ◽  
Author(s):  
Kathleen A. Richardson ◽  
Kevin Zollinger ◽  
Jennifer K. Evans ◽  
Mathieu Marchivie ◽  
Alfons Schulte ◽  
...  

Author(s):  
Yukihiro Ozaki

Recently-developed near-infrared Fourier transform (FT)-Raman spectroscopy has received keen interest of researchers in bio-Raman field because near-infrared excitation can avoid mostly fluorescence and photodecomposition, which have been two major drawbacks of Raman spectroscopy in its biological and medical applications. Introduction of FT-Raman microspectroscopy makes near-infrared FT-Raman spectroscopy more useful for studying biomedical materials. The purpose of the present paper is to demonstrate the potential of near-infrared FT-Raman microspectroscopy in nondestructive structural analysis of biological systems. Photosynthetic bacteria is taken up here as an example.The FT-Raman spectra of the photosynthetic bacteria were measured with a JEOL JRS-FT6500N FT-Raman spectrometer equipped with an optical microscopy. Excitation wavelength at 1064-nm was provided by a CW Nd:YAG laser (CVI YAGMAX c-92), and the laser power at the sample position was typically 150 mW. All the data were collected at a spectral resolution of 8 cm-1 and spatial resolution of 8 μm.


1995 ◽  
Vol 14 (6) ◽  
pp. 511-515 ◽  
Author(s):  
Douglas Borchman ◽  
Yukihiro Ozaki ◽  
Om P. Lamba ◽  
William C. Byrdwell ◽  
Mirostaw A. Czarnecki ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document