Recent Developments Using Phosphorus-Containing Diol as a Reactive Combustion Modifier for Rigid Polyurethane Foams-Part III

1985 ◽  
Vol 21 (2) ◽  
pp. 93-100
Author(s):  
F.T. Lee ◽  
J. Green ◽  
R.D. Gibilisco
2020 ◽  
Vol 31 (4) ◽  
pp. 1420-1430 ◽  
Author(s):  
Gang Tang ◽  
Xinliang Liu ◽  
Yadong Yang ◽  
Depeng Chen ◽  
Hao Zhang ◽  
...  

1988 ◽  
Vol 24 (11) ◽  
pp. 1101-1105 ◽  
Author(s):  
E. Tashev ◽  
S. Shenkov ◽  
K. Troev ◽  
G. Borissov ◽  
L. Zabski ◽  
...  

2020 ◽  
Vol 17 (10) ◽  
pp. 760-771
Author(s):  
Qirui Gong ◽  
Niangui Wang ◽  
Kaibo Zhang ◽  
Shizhao Huang ◽  
Yuhan Wang

A phosphaphenanthrene groups containing soybean oil based polyol (DSBP) was synthesized by epoxidized soybean oil (ESO) and 9,10-dihydro-oxa-10-phosphaphenanthrene-10-oxide (DOPO). Soybean oil based polyol (HSBP) was synthesized by ESO and H2O. The chemical structure of DSBP and HSBP were characterized with FT-IR and 1H NMR. The corresponding rigid polyurethane foams (RPUFs) were prepared by mixing DSBP with HSBP. The results revealed apparent density and compression strength of RPUFs decreased with increasing the DSBP content. The cell structure of RPUFs was examined by scanning electron microscope (SEM) which displayed the cells as spherical or polyhedral. The thermal degradation and flame retardancy of RPUFs were investigated by thermogravimetric analysis, limiting oxygen index (LOI), and UL 94 vertical burning test. The degradation activation energy (Ea) of first degradation stage reduced from 80.05 kJ/mol to 37.84 kJ/mol with 80 wt% DSBP. The RUPF with 80 wt% DSBP achieved UL94 V-0 rating and LOI 28.3. The results showed that the flame retardant effect was mainly in both gas phase and condensed phase.


2021 ◽  
pp. 026248932198897
Author(s):  
Serife Akkoyun ◽  
Meral Akkoyun

The aim of this work is the fabrication of electrically insulating composite rigid polyurethane foams with improved thermal conductivity. Therefore, this study is focused on the effect of aluminum nitride (AlN) on the thermal and electrical conductivities of rigid polyurethane foams. For this purpose, aluminum nitride/rigid polyurethane composite foams were prepared using a three-step procedure. The electrical and thermal conductivities of the foams were characterized. The thermal transitions, mechanical properties and morphology of the foams were also examined. The results reveal that AlN induces an increase of the thermal conductivity of rigid polyurethane foam of 24% which seems to be a relatively noticeable increase in polymeric foams. The low electrical conductivity of the foams is preserved.


2004 ◽  
Vol 36 (4) ◽  
pp. 333-349 ◽  
Author(s):  
Bo Yin ◽  
Zhong-Ming Li ◽  
Hui Quan ◽  
Ming-Bo Yang ◽  
Qiu-Ming Zhou ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document