New BODIPY Dyes Based on Benzoxazole as Photosensitizers in Radical Polymerization of Acrylate Monomers

A series of 2-phenacylbenzoxazole difluoroboranes named BODIPY dyes (1–8) was designed and applied as photosensitizers (PS) for radical photopolymerization of acrylate monomer. The light absorption within the ultraviolet-visible (UV–Vis) range (λmax = 350–410 nm; εmax = 23,000–42,500 M−1cm−1), that is strongly influenced by the substituents on the C3 and C4 atoms of phenyl ring, matched the emission of the Omnicure S2000 light within 320–500 nm. The photosensitizer possess fluorescence quantum yield from about 0.005 to 0.99. The 2-phenacylbenzoxazole difluoroboranes, together with borate salt (Bor), iodonium salt (Iod) or pyridinium salt (Pyr) acting as co-initiators, can generate active radicals upon the irradiation with a High Pressure Mercury Lamp which initiates a high-performance UV–Vis light-induced radical polymerization at 320–500 nm. The polymers obtained are characterized by strong photoluminescence. It was found that the type of radical generator (co-initiator) has a significant effect on the kinetic of radical polymerization of acrylate monomer. Moreover, the chemical structure of the BODIPY dyes does not influence the photoinitiating ability of the photoinitiator. The concentration of the photoinitiating system affects the photoinitiating performance. These 2-phenacylbenzoxazole difluoroborane-based photoinitiating systems have promising applications in UV–Vis-light induced polymerization.

New Membrane-Forming Aromatic Co-Poly(amide-imide)s: Influence of the Chemical Structure on the Morphological, Thermal and Transport Properties

Polymer film membranes are used to solve specific separation problems that dictate structural requirements. Structural and morphological parameters of film membranes based on glassy polyheteroarylenes can be controlled in the process of preparation from solutions that opens up prospects for obtaining structured membranes required for targeted separation. In the case of aromatic poly(amide-imide)s, the possibility of controlling film formation and structure virtually has not been studied. In the present work, a series of homologous co-poly(amide-imide)s differing in the number of repeating units with carboxyl-substituted aromatic fragments was synthesized by polycondensation. Comparative analysis of the processes of formation of membranes with different morphologies based on these polymers under equal conditions was performed. New information was obtained about the influence of the amounts of carboxyl groups and the residual solvent on structural properties of asymmetric membranes. The influence of these factors on transport properties of dense membranes under pervaporation conditions was studied. It was demonstrated that in the case of carboxyl-containing poly(amide-imide)s, the domains formed during film preparation had a significant effect on membrane properties.

Thymoquinone-Loaded Chitosan Nanoparticles as Natural Preservative Agent in Cosmetic Products

The current status of controversy regarding the use of certain preservatives in cosmetic products makes it necessary to seek new ecological alternatives that are free of adverse effects on users. In our study, the natural terpene thymoquinone was encapsulated in chitosan nanoparticles. The nanoparticles were characterized by DLS and TEM, showing a particle size of 20 nm. The chemical structure, thermal properties, and release profile of thymoquinone were evaluated and showed a successful stabilization and sustained release of terpenes. The antimicrobial properties of the nanoparticles were evaluated against typical microbial contaminants found in cosmetic products, showing high antimicrobial properties. Furthermore, natural moisturizing cream inoculated with the aforementioned microorganisms was formulated with thymoquinone-chitosan nanoparticles to evaluate the preservative efficiency, indicating its promising use as a preservative in cosmetics.

Structural Insights for Core Scaffold and Substrate Specificity of B1, B2, and B3 Metallo-β-Lactamases

Metallo-β-lactamases (MBLs) hydrolyze almost all β-lactam antibiotics, including penicillins, cephalosporins, and carbapenems; however, no effective inhibitors are currently clinically available. MBLs are classified into three subclasses: B1, B2, and B3. Although the amino acid sequences of MBLs are varied, their overall scaffold is well conserved. In this study, we systematically studied the primary sequences and crystal structures of all subclasses of MBLs, especially the core scaffold, the zinc-coordinating residues in the active site, and the substrate-binding pocket. We presented the conserved structural features of MBLs in the same subclass and the characteristics of MBLs of each subclass. The catalytic zinc ions are bound with four loops from the two central β-sheets in the conserved αβ/βα sandwich fold of MBLs. The three external loops cover the zinc site(s) from the outside and simultaneously form a substrate-binding pocket. In the overall structure, B1 and B2 MBLs are more closely related to each other than they are to B3 MBLs. However, B1 and B3 MBLs have two zinc ions in the active site, while B2 MBLs have one. The substrate-binding pocket is different among all three subclasses, which is especially important for substrate specificity and drug resistance. Thus far, various classes of β-lactam antibiotics have been developed to have modified ring structures and substituted R groups. Currently available structures of β-lactam-bound MBLs show that the binding of β-lactams is well conserved according to the overall chemical structure in the substrate-binding pocket. Besides β-lactam substrates, B1 and cross-class MBL inhibitors also have distinguished differences in the chemical structure, which fit well to the substrate-binding pocket of MBLs within their inhibitory spectrum. The systematic structural comparison among B1, B2, and B3 MBLs provides in-depth insight into their substrate specificity, which will be useful for developing a clinical inhibitor targeting MBLs.

Use of Dexmedetomidine in a Patient Allergic to Clonidine Presenting for an Awake Craniotomy: A Case Report

Introduction: The use of dexmedetomidine with concurrent scalp block is increasingly being utilized as an effective and safe anesthetic approach for awake craniotomy (AC). Dexmedetomidine is an alpha-2 adrenergic receptor (α2-AR) agonist with dose-dependent sedative, analgesic, and anxiolytic properties while preserving respiratory function. The challenge with the use of dexmedetomidine arises when the patient in question has a clonidine allergy that is also an α2-AR agonist. Currently there aren’t any published literature regarding the use of dexmedetomidine in a patient allergic to clonidine. Case Presentation: A 48-year-old male with chronic obstructive pulmonary disease, obstructive sleep apnea, and body mass index of 54 with clonidine allergy presents for an AC. Given the goals of the surgery and patient comorbidities, we planned for monitored anesthesia care with intravenous (IV) dexmedetomidine, remifentanil, and propofol. We discussed the use of dexmedetomidine with the patient and the potential risk of allergic reaction given his allergy to clonidine. Patient understood the risk and consented to the anesthetic plan. AC was successfully performed with IV dexmedetomidine, remifentanil, and propofol.Conclusion: Although both dexmedetomidine and clonidine have some functional similarities in terms of acting on the central and peripheral nervous system, there are marked differences between the two based on chemical structure, receptor affinity, and metabolism of the drug. This case highlights the successful use of dexmedetomidine in a patient with known allergy of rash to clonidine.

Geographical Distribution and Pattern of Pesticides in Danish Drinking Water 2002–2018: Reducing Data Complexity

Pesticides are a large and heterogenous group of chemicals with a complex geographic distribution in the environment. The purpose of this study was to explore the geographic distribution of pesticides in Danish drinking water and identify potential patterns in the grouping of pesticides. Our data included 899,169 analyses of 167 pesticides and metabolites, of which 55 were identified above the detection limit. Pesticide patterns were defined by (1) pesticide groups based on chemical structure and pesticide–metabolite relations and (2) an exploratory factor analysis identifying underlying patterns of related pesticides within waterworks. The geographic distribution was evaluated by mapping the pesticide categories for groups and factor components, namely those detected, quantified, above quality standards, and not analysed. We identified five and seven factor components for the periods 2002–2011 and 2012–2018, respectively. In total, 16 pesticide groups were identified, of which six were representative in space and time with regards to the number of waterworks and analyses, namely benzothiazinone, benzonitriles, organophosphates, phenoxy herbicides, triazines, and triazinones. Pesticide mapping identified areas where multiple pesticides were detected, indicating areas with a higher pesticide burden. The results contribute to a better understanding of the pesticide pattern in Danish drinking water and may contribute to exposure assessments for future epidemiological studies.

Multiphoton Bleaching of Red Fluorescent Proteins and the Ways to Reduce It

Red fluorescent proteins and biosensors built upon them are potentially beneficial for two-photon laser microscopy (TPLM) because they can image deeper layers of tissue, compared to green fluorescent proteins. However, some publications report on their very fast photobleaching, especially upon excitation at 750–800 nm. Here we study the multiphoton bleaching properties of mCherry, mPlum, tdTomato, and jREX-GECO1, measuring power dependences of photobleaching rates K at different excitation wavelengths across the whole two-photon absorption spectrum. Although all these proteins contain the chromophore with the same chemical structure, the mechanisms of their multiphoton bleaching are different. The number of photons required to initiate a photochemical reaction varies, depending on wavelength and power, from 2 (all four proteins) to 3 (jREX-GECO1) to 4 (mCherry, mPlum, tdTomato), and even up to 8 (tdTomato). We found that at sufficiently low excitation power P, the rate K often follows a quadratic power dependence, that turns into higher order dependence (K~Pα with α > 2) when the power surpasses a particular threshold P*. An optimum intensity for TPLM is close to the P*, because it provides the highest signal-to-background ratio and any further reduction of laser intensity would not improve the fluorescence/bleaching rate ratio. Additionally, one should avoid using wavelengths shorter than a particular threshold to avoid fast bleaching due to multiphoton ionization.

Production And Fusion Of Antimicrobial Agents With Bio Plastic Using Palmyra Sprout

The problems linked to plastic wastes have led to the development of biodegradable plastics. More specifically, biodegradable bioplastics are the polymers that are mineralized into carbon dioxide, methane, water, inorganic compounds, or biomass through the enzymatic action of specific microorganisms. They could, therefore, be a suitable and environmentally friendly substitute to conventional petrochemical plastics. The physico-chemical structure of the biopolymers, the environmental conditions, as well as the microbial populations to which the bioplastics are exposed to are the most influential factors to biodegradation. The Borassus flabellifer is a tall and erect palm, with large, fan-shaped leaves which are quite unlike the pinnate leaves of other palms. Borassus is from a Greek word describing the leathery covering of the fruit and flabellifer means “fan bearer”. In recent years, India stands first in the world in terms of its wealth of Palmyra (Borassus flabellifer population nearly 122 million palms. In this study overall purpose was to investigate the utilization of food industry wastes in order for the bioplastic production. To achieve this objective the production of bioplastic from palmyra sprout investigated. In addition, some properties of produced bioplastic such as water, absorption capacity, solubility and biodegradability, characterisation studies were analysed. Journal of University of Shanghai for Science and Technology ISSN: 1007-6735 Volume