scholarly journals Biogeochemistry and the associated redox signature of co-produced water from coalbed methane wells in the Shizhuangnan block in the southern Qinshui Basin, China

2020 ◽  
Vol 38 (4) ◽  
pp. 1034-1053
Author(s):  
Yang Li ◽  
Shuheng Tang ◽  
Songhang Zhang ◽  
Zhaodong Xi ◽  
Pengfei Wang

To meet the global energy demands, the exploitation of coalbed methane has received increasing attention. Biogeochemical parameters of co-produced water from coalbed methane wells were performed in the No. 3 coal seam in the Shizhuangnan block of the southern Qinshui Basin (China). These biogeochemical parameters were firstly utilized to assess coal reservoir environments and corresponding coalbed methane production. A high level of Na+ and HCO3– and deuterium drift were found to be accompanied by high gas production rates, but these parameters are unreliable to some extent. Dissolved inorganic carbon (DIC) isotopes δ13CDIC from water can be used to distinguish the environmental redox conditions. Positive δ13CDIC values within a reasonable range suggest reductive conditions suitable for methanogen metabolism and were accompanied by high gas production rates. SO42–, NO3– and related isotopes affected by various bacteria corresponding to various redox conditions are considered effective parameters to identify redox states and gas production rates. Importantly, the combination of δ13CDIC and SO42– can be used to evaluate gas production rates and predict potentially beneficial areas. The wells with moderate δ13CDIC and negligible SO42– represent appropriate reductive conditions, as observed in most high and intermediate production wells. Furthermore, the wells with highest δ13CDIC and negligible SO42– exhibit low production rates, as the most reductive environments were too strict to extend pressure drop funnels.

2020 ◽  
Vol 38 (5) ◽  
pp. 1535-1558
Author(s):  
Qiujia Hu ◽  
Shiqi Liu ◽  
Shuxun Sang ◽  
Huihuang Fang ◽  
Ashutosh Tripathy ◽  
...  

Multilayer drainage is one of the important technologies for coalbed methane (CBM) production in China. In this study, a multi-field fully coupled mathematical model for CBM production was established to analyze the multilayer drainage of CBM well group in southern Qinshui basin. Based on the numerical simulation results, the characteristics of CBM well production under different drainage rates and key factors influencing the CBM production were further discussed. The results show that the effect of an increased drainage rate on gas production of CBM wells and CBM recovery of No.3 coal seam is not significant. However, it significantly improved the gas production of CBM wells and CBM recovery of No.15 coal seam. After a long period of production, the CBM content in No.3 coal seam has reduced to a low level and the pressure drop potential of No.3 coal seam is insignificant, which are important reasons for the insignificant increase of CBM production even under a drainage rate of 2 to 7 times. Conversely, No.15 coal seam has larger residual CBM content and increasing the drainage rate can significantly improve the pressure drop and superimposed well interference of No.15 coal seam, which means No.15 coal seam has greater production potential than No.3 coal seam. Therefore, it is recommended to improve the gas production and CBM recovery in No.15 coal seam by increasing the drainage rate, and the average hydraulic pressure drop should be 0.018–0.031 MPa/day. The influence of effective stress is weak in No.3 and No.15 coal seam, and the coal seam permeability is largely influenced by the shrinkage of coal matrix caused by CBM desorption. This indicates the feasibility of increase in gas production from CBM wells by increasing the drainage rate.


Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 130
Author(s):  
Yang Li ◽  
Shuheng Tang ◽  
Songhang Zhang ◽  
Zhaodong Xi ◽  
Pengfei Wang

Coalbed methane is a major unconventional resource that has been exploited commercially for decades in the southern Qinshui Basin of China. The hydrogeochemical characteristics of coal reservoir water play a key role in the exploration and development of coalbed methane resources. In view of this, a detailed study was performed on coalbed methane co-produced water collected from the Shizhuangnan block to assess water–rock interactions and biogeochemical processes. Water samples were analyzed to establish major ions, isotopic compositions and perform 16S rRNA sequencing. Results suggest that the hydrochemistry was controlled by water–rock processes and that methane was consumed by sulfate reduction through calculation. Meanwhile, the isotopic compositions of water samples indicated that they had a predominantly meteoric origin and were influenced by microbial activity. The 16S rRNA sequencing results of bacteria and archaea provide an important foundation for understanding the activity of sulfate-reducing bacteria and methanogens at different hydraulic heads, which was consistent with isotopic analysis. Carbonates containing calcite and dolomite were found to be distributed at different hydraulic head due to the biogeochemical characteristics and associated water–rock interactions.


2014 ◽  
Vol 962-965 ◽  
pp. 21-28
Author(s):  
Bei Liu ◽  
Wei Hua Ao ◽  
Wen Hui Huang ◽  
Qi Lu Xu ◽  
Juan Teng

Coalbed methane (CBM) productivity is influenced by various factors. Based on field production data and test data of southern Qinshui Basin, factors including geological factors, engineering factors and drainage factors that affect CBM productivity are analyzed. Analytic hierarchy process (AHP) is introduced to calculate the contribution of each parameter to CBM productivity. A three-level model for evaluating CBM productivity based on AHP is established. The results show that average daily gas production of single well in southern Qinshui Basin increases with gas content, coal seam thickness, permeability, porosity, gas saturation, critical desorption pressure. Filling minerals in pores and fractures of coal can decrease gas content, porosity and permeability of coal reservoir. When burial depth is deeper than 500m or reservoir pressure is greater than 2MPa and burial depth is shallower than 1000m or reservoir pressure is less than 10MPa, CBM productivity is relatively high. According to the calculation, the weight of geological factors, engineering factors and drainage factors are 50%, 25% and 25%, respectively. Reservoir physical properties, geological conditions, fracturing technology and drainage process have the most impact, the weight of which are 33.33%, 16.67%, 11.79%, and 15.00%, respectively.


Author(s):  
Hou Jie ◽  
Zou Changchun ◽  
Huang Zhaohui ◽  
Xiao Liang ◽  
Yang Yuqing ◽  
...  

2018 ◽  
Vol 36 (6) ◽  
pp. 1424-1437 ◽  
Author(s):  
Mingjun Zou ◽  
Xiaochun Lv ◽  
Zhiquan Huang ◽  
Simin Wei ◽  
Miao Zhang ◽  
...  

Two indirect parameters influencing coalbed methane (CBM) drainage performances are proposed in this paper, which are effective desorption radius and difference between reservoir pressure and critical desorption pressure (DRPCDP). Variations of the two parameters during CBM drainage are investigated, which shows that they have a linear relationship. By using formula derivations, a theoretical model for gas production prediction is built. It suggests that the cumulative gas production is a product of square of effective desorption radius with DRPCDP, and there is also a cubic polynomial relationship between cumulative gas production and linear average DRPCDP. Furthermore, well PM01 located at southern Qinshui basin of China is selected as a case, and a commercial software is adopted to predict the gas production. Compared with the simulated and modeled cumulative gas productions, the simulated data match well with the modeled data, which indicates that the model has a good accuracy.


Sign in / Sign up

Export Citation Format

Share Document