Total output power variation of several small wind turbines

2020 ◽  
pp. 0309524X2090798
Author(s):  
Kenta Kashiwaya ◽  
Junji Kondoh ◽  
Kakuru Funabashi

There is a concern that connection of several small wind turbines may cause severe voltage fluctuation and voltage flicker in low-voltage distribution lines due to their output power variations. In this study, output power variations of four 5-kW-class small wind turbine systems were measured with an interval of 0.1 s at a site in Wakkanai, Hokkaido, and their correlations and smoothing effect in the frequency range from [Formula: see text] to 5 Hz were analyzed and compared with those of five residential photovoltaic power systems. The results indicate that a smoothing effect occurs more in small wind turbines than in photovoltaic systems, because of lower correlation coefficients in lower frequency ([Formula: see text] Hz) components. Voltage flicker at the point of common coupling was also measured and it was confirmed that the impact of small wind turbines on voltage flicker is low enough at the site. In addition, the upper limits of the installation number and/or the system resistance are estimated theoretically using the measured flicker values.

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7263
Author(s):  
Junji Kondoh ◽  
Daisuke Kodaira

It is well known that the output power from small wind turbines (SWTs) fluctuates noticeably more when compared to that from other types of dispersed generators, such as residential photovoltaic (PV) power generation systems. Thus, the degradation of voltage quality, such as flicker emissions, when numerous SWTs are installed in a low-voltage distribution system is a particular concern. Nevertheless, practical examples of flicker emissions from small wind power facilities have not been made public. This paper aims to clarify the characteristics of flicker emissions by SWTs and their severity. The measurement results at the two selected sites indicate that the flicker emissions solely caused by variable-speed SWTs with a total power rating of ~20 kW are notably lower than the upper limit, and they are at their highest when the mean total output power is approximately 3/4 of the total power rating of small wind power facilities.


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1688 ◽  
Author(s):  
C. Birk Jones ◽  
Matthew Lave ◽  
William Vining ◽  
Brooke Marshall Garcia

An increase in Electric Vehicles (EV) will result in higher demands on the distribution electric power systems (EPS) which may result in thermal line overloading and low voltage violations. To understand the impact, this work simulates two EV charging scenarios (home- and work-dominant) under potential 2030 EV adoption levels on 10 actual distribution feeders that support residential, commercial, and industrial loads. The simulations include actual driving patterns of existing (non-EV) vehicles taken from global positioning system (GPS) data. The GPS driving behaviors, which explain the spatial and temporal EV charging demands, provide information on each vehicles travel distance, dwell locations, and dwell durations. Then, the EPS simulations incorporate the EV charging demands to calculate the power flow across the feeder. Simulation results show that voltage impacts are modest (less than 0.01 p.u.), likely due to robust feeder designs and the models only represent the high-voltage (“primary”) system components. Line loading impacts are more noticeable, with a maximum increase of about 15%. Additionally, the feeder peak load times experience a slight shift for residential and mixed feeders (≈1 h), not at all for the industrial, and 8 h for the commercial feeder.


Author(s):  
Abolfazl Pourrajabian ◽  
Reza Ebrahimi ◽  
Masoud Mirzaei ◽  
Mehdi Ahmadizadeh ◽  
David Wood

Since the air density reduces as the altitude increases, operation of Small Wind Turbines (SWTs) which usually have no pitch mechanism, remains as a challengeable task at high altitudes due largely to the reduction of starting aerodynamic torque. By reducing the blades moment of inertia through the use of hollow blades, the study aims to mitigate that issue and speed up the starting. A three-bladed, 2 m diameter small horizontal axis wind turbine with hollow cross-section was designed for operating at two sites with altitude of 500 and 3,000 m. The design variables consist of distribution of the chord, twist and shell thickness along the blade. The blade-element momentum theory was employed to calculate the output power and starting time and, the beam theory was used for the structural analysis to investigate whether the hollow blades could withstand the aerodynamic and centrifugal forces. A combination of the starting time and the output power was included in an objective function and then, the genetic algorithm was used to find a blade for which the output power and the starting performance, the goals of the objective function, are high while the stress limitation, the objective function constraint, is also met. While the resultant stresses remain below the allowable stress, results show that the performance of the hollow blades is far better than the solid ones such that their starting time is shorter than the solid blades by approximately 70%. However, in the presence of the generator resistive torque, the algorithm could not find the blade for the altitude near to 3000 m. To solve that problem, the tip speed ratio of the turbine was added to other design variables and another optimization process was done which led to the optimal blades not only for the lower altitude but also for the higher one.


Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4246 ◽  
Author(s):  
Guglielmo D’Amico ◽  
Giovanni Masala ◽  
Filippo Petroni ◽  
Robert Adam Sobolewski

Because of the stochastic nature of wind turbines, the output power management of wind power generation (WPG) is a fundamental challenge for the integration of wind energy systems into either power systems or microgrids (i.e., isolated systems consisting of local wind energy systems only) in operation and planning studies. In general, a wind energy system can refer to both one wind farm consisting of a number of wind turbines and a given number of wind farms sited at the area in question. In power systems (microgrid) planning, a WPG should be quantified for the determination of the expected power flows and the analysis of the adequacy of power generation. Concerning this operation, the WPG should be incorporated into an optimal operation decision process, as well as unit commitment and economic dispatch studies. In both cases, the probabilistic investigation of WPG leads to a multivariate uncertainty analysis problem involving correlated random variables (the output power of either wind turbines that constitute wind farm or wind farms sited at the area in question) that follow different distributions. This paper advances a multivariate model of WPG for a wind farm that relies on indexed semi-Markov chains (ISMC) to represent the output power of each wind energy system in question and a copula function to reproduce the spatial dependencies of the energy systems’ output power. The ISMC model can reproduce long-term memory effects in the temporal dependence of turbine power and thus understand, as distinct cases, the plethora of Markovian models. Using copula theory, we incorporate non-linear spatial dependencies into the model that go beyond linear correlations. Some copula functions that are frequently used in applications are taken into consideration in the paper; i.e., Gumbel copula, Gaussian copula, and the t-Student copula with different degrees of freedom. As a case study, we analyze a real dataset of the output powers of six wind turbines that constitute a wind farm situated in Poland. This dataset is compared with the synthetic data generated by the model thorough the calculation of three adequacy indices commonly used at the first hierarchical level of power system reliability studies; i.e., loss of load probability (LOLP), loss of load hours (LOLH) and loss of load expectation (LOLE). The results will be compared with those obtained using other models that are well known in the econometric field; i.e., vector autoregressive models (VAR).


2012 ◽  
Vol 23 (13) ◽  
pp. 1409-1421 ◽  
Author(s):  
Cuong P Le ◽  
Einar Halvorsen ◽  
Oddvar Søråsen ◽  
Eric M Yeatman

This article presents a new concept for electrostatic energy harvesting devices that increase output power under displacement limited inertial mass motion at sufficiently large acceleration amplitudes. The concept is illustrated by two demonstrated electrostatic energy harvesting prototypes in the same die dimension: a reference device with end-stops and an impact device with movable end-stops functioning as slave transducers. Both devices are analyzed and characterized in small and large excitation regimes. We found that significant additional energy from the internal impact force can be harvested by the slave transducer. The impact device gives much higher, up to a factor of 3.7, total output power than the reference device at the same high-acceleration amplitude. The bandwidth of the response to frequency sweeps is beneficially enlarged by up to a factor of 20 by the nonlinear mechanisms of the impact device.


Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5874
Author(s):  
Navid Goudarzi ◽  
Kasra Mohammadi ◽  
Alexandra St. St. Pé ◽  
Ruben Delgado ◽  
Weidong Zhu

Annual mean wind speed distribution models for power generation based on regional wind resource maps are limited by spatial and temporal resolutions. These models, in general, do not consider the impact of local terrain and atmospheric circulations. In this study, long-term five-year wind data at three sites on the North, East, and West of the Baltimore metropolitan area, Maryland, USA are statistically analyzed. The Weibull probability density function was defined based on the observatory data. Despite seasonal and spatial variability in the wind resource, the annual mean wind speed for all sites is around 3 m/s, suggesting the region is not suitable for large-scale power generation. However, it does display a wind power capacity that might allow for non-grid connected small-scale wind turbine applications. Technical and economic performance evaluations of more than 150 conventional small-scale wind turbines showed that an annual capacity factor and electricity production of 11% and 1990 kWh, respectively, are achievable. It results in a payback period of 13 years. Government incentives can improve the economic feasibility and attractiveness of investments in small wind turbines. To reduce the payback period lower than 10 years, modern/unconventional wind harvesting technologies are found to be an appealing option in this region. Key contributions of this work are (1) highlighting the need for studying the urban physics rather than just the regional wind resource maps for wind development projects in the build-environment, (2) illustrating the implementation of this approach in a real case study of Maryland, and (3) utilizing techno-economic data to determine suitable wind harnessing solutions for the studied sites.


2013 ◽  
Vol 1 (4) ◽  
pp. 9-16
Author(s):  
Jonathan Blackledge ◽  
◽  
Eugene Coyle ◽  
Derek Kearney ◽  
Eamonn Murphy ◽  
...  

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1224
Author(s):  
Chao Ai ◽  
Guangling Zhou ◽  
Yalun Wang ◽  
Wei Gao ◽  
Xiangdong Kong

To improve the power grid adaptability and low voltage ride-through (LVRT) capability of hydraulic wind turbines (HWT), an LVRT control method based on hierarchical control is proposed for the energy regulation of HWT. The method includes a top-level machine-controlled paddle, mid-level control based on variable motor swash plate angle, and an underlying control based on throttle opening. To achieve multivariable coordinated control of the HWT via the control process, the minimum wind, maximum inertial energy storage, and minimum energy consumption of the throttle valve of the wind turbine are optimized. The multiobjective control law is computed by a quadratic programming algorithm, and the optimal control law is obtained. The multitarget control strategy is simulated and analyzed by AMESim14 and MATLAB/Simulink R2014a software, and the control law is verified by a semiphysical test platform of an HWT. The results show that the proposed control method can effectively reduce the residual energy of the HWT during LVRT, reduce the impact on the generator, and improve the adaptability of the HWT.


2008 ◽  
Vol 32 (2) ◽  
pp. 115-141 ◽  
Author(s):  
N. Senthil Kumar ◽  
M. Abdullah Khan

The increasing power demand has led to the growth of new technologies that play an integral role in shaping the future energy market. Keeping in view of the environmental constraints, grid connected wind turbines are promising in increasing system reliability. This paper presents the impact of Flexible A.C. Transmission System (FACTS) controllers on the dynamic stability of power systems connected with wind energy conversion systems. The wind generator model considered is a variable speed doubly - fed induction generator model. The stability assessment is made first for a three phase short circuit without the FACTS controllers in the power network and then with the FACTS controllers. The dynamic simulation results yield information on (i) The impact of faults on the performance of induction generators/wind turbines. (ii) The change in controllable parameters of the FACTS controllers following the disturbance. (iii) Transient rating of the FACTS controllers for enhancement of rotor speed stability of induction generators and angle stability of synchronous generators.


Sign in / Sign up

Export Citation Format

Share Document