Impact of FACTS Controllers on the Dynamic Stability of Power Systems Connected with Wind Farms

2008 ◽  
Vol 32 (2) ◽  
pp. 115-141 ◽  
Author(s):  
N. Senthil Kumar ◽  
M. Abdullah Khan
Keyword(s):  
Power Systems ◽  
Dynamic Stability ◽  
Wind Turbines ◽  
New Technologies ◽  
Short Circuit ◽  
Wind Farms ◽  
Induction Generators ◽  
Generator Model ◽  
Facts Controllers ◽  
The Impact

The increasing power demand has led to the growth of new technologies that play an integral role in shaping the future energy market. Keeping in view of the environmental constraints, grid connected wind turbines are promising in increasing system reliability. This paper presents the impact of Flexible A.C. Transmission System (FACTS) controllers on the dynamic stability of power systems connected with wind energy conversion systems. The wind generator model considered is a variable speed doubly - fed induction generator model. The stability assessment is made first for a three phase short circuit without the FACTS controllers in the power network and then with the FACTS controllers. The dynamic simulation results yield information on (i) The impact of faults on the performance of induction generators/wind turbines. (ii) The change in controllable parameters of the FACTS controllers following the disturbance. (iii) Transient rating of the FACTS controllers for enhancement of rotor speed stability of induction generators and angle stability of synchronous generators.

Seismic Design for Offshore Wind Farms – Lessons Learnt From the ACE Joint Industry Project

2021 ◽  
Author(s):  
Marcus Klose ◽  
Junkan Wang ◽  
Albert Ku
Keyword(s):  
Seismic Design ◽  
Wind Turbines ◽  
Wind Farms ◽  
The United States ◽  
Offshore Wind ◽  
Seismic Load ◽  
Support Structures ◽  
Offshore Wind Farms ◽  
Asian Pacific Region ◽  
The Impact

Abstract In the past, most of the offshore wind farms have been installed in European countries. In contrast to offshore wind projects in European waters, it became clear that the impact from earthquakes is expected to be one of the major design drivers for the wind turbines and their support structures in other areas of the world. This topic is of high importance in offshore markets in the Asian Pacific region like China, Taiwan, Japan, Korea as well as parts of the United States. So far, seismic design for wind turbines is not described in large details in existing wind energy standards while local as well as international offshore oil & gas standards do not consider the specifics of modern wind turbines. In 2019, DNV GL started a Joint Industry Project (JIP) called “ACE -Alleviating Cyclone and Earthquake challenges for wind farms”. Based on the project results, a Recommended Practice (RP) for seismic design of wind turbines and their support structures will be developed. It will supplement existing standards like DNVGL-ST-0126, DNVGL-ST-0437 and the IEC 61400 series. This paper addresses the area of seismic load calculation and the details of combining earthquake impact with other environmental loads. Different options of analysis, particularly time-domain simulations with integrated models or submodelling techniques using superelements will be presented. Seismic ground motions using a uniform profile or depth-varying input profile are discussed. Finally, the seismic load design return period is addressed.

scholarly journals Impact of Primary Frequency Control of Offshore HVDC Grids on Interarea Modes of Power Systems

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3879 ◽  
Author(s):  
Ali Bidadfar ◽  
Oscar Saborío-Romano ◽  
Vladislav Akhmatov ◽  
Nicolaos A. Cutululis ◽  
Poul E. Sørensen
Keyword(s):  
Power Systems ◽  
Frequency Control ◽  
Wind Farms ◽  
Offshore Wind ◽  
Offshore Wind Farms ◽  
Dc Voltage ◽  
Simultaneous Use ◽  
Primary Frequency ◽  
Primary Frequency Control ◽  
The Impact

Offshore high-voltage DC (HVDC) grids are developing as a technically reliable and economical solution to transfer more offshore wind power to onshore power systems. It is also foreseen that the offshore HVDC grids pave the way for offshore wind participation in power systems’ balancing process through frequency support. The primary frequency control mechanism in an HVDC grid can be either centralized using communication links between HVDC terminals or decentralized by the simultaneous use of DC voltage and frequency droop controls. This paper investigates the impact of both types of primary frequency control of offshore HVDC grids on onshore power system dynamics. Parametric presentation of power systems’ electro-mechanical dynamics and HVDC controls is developed to analytically prove that the primary frequency control can improve the damping of interarea modes of onshore power systems. The key findings of the paper include showing that the simultaneous use of frequency and DC voltage droop controls on onshore converters results in an autonomous share of damping torque between onshore power systems even without any participation of offshore wind farms in the frequency control. It is also found that the resulting damping from the frequency control of offshore HVDC is not always reliable as it can be nullified by the power limits of HVDC converters or wind farms. Therefore, using power oscillation damping control in parallel with frequency control is suggested. The analytical findings are verified by simulations on a three-terminal offshore HVDC grid.

scholarly journals Managing Wind Power Generation via Indexed Semi-Markov Model and Copula

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4246 ◽  
Author(s):  
Guglielmo D’Amico ◽  
Giovanni Masala ◽  
Filippo Petroni ◽  
Robert Adam Sobolewski
Keyword(s):  
Power Generation ◽  
Power Systems ◽  
Wind Energy ◽  
Output Power ◽  
Wind Turbines ◽  
Wind Farm ◽  
Energy Systems ◽  
Wind Farms ◽  
Energy System ◽  
Spatial Dependencies

Because of the stochastic nature of wind turbines, the output power management of wind power generation (WPG) is a fundamental challenge for the integration of wind energy systems into either power systems or microgrids (i.e., isolated systems consisting of local wind energy systems only) in operation and planning studies. In general, a wind energy system can refer to both one wind farm consisting of a number of wind turbines and a given number of wind farms sited at the area in question. In power systems (microgrid) planning, a WPG should be quantified for the determination of the expected power flows and the analysis of the adequacy of power generation. Concerning this operation, the WPG should be incorporated into an optimal operation decision process, as well as unit commitment and economic dispatch studies. In both cases, the probabilistic investigation of WPG leads to a multivariate uncertainty analysis problem involving correlated random variables (the output power of either wind turbines that constitute wind farm or wind farms sited at the area in question) that follow different distributions. This paper advances a multivariate model of WPG for a wind farm that relies on indexed semi-Markov chains (ISMC) to represent the output power of each wind energy system in question and a copula function to reproduce the spatial dependencies of the energy systems’ output power. The ISMC model can reproduce long-term memory effects in the temporal dependence of turbine power and thus understand, as distinct cases, the plethora of Markovian models. Using copula theory, we incorporate non-linear spatial dependencies into the model that go beyond linear correlations. Some copula functions that are frequently used in applications are taken into consideration in the paper; i.e., Gumbel copula, Gaussian copula, and the t-Student copula with different degrees of freedom. As a case study, we analyze a real dataset of the output powers of six wind turbines that constitute a wind farm situated in Poland. This dataset is compared with the synthetic data generated by the model thorough the calculation of three adequacy indices commonly used at the first hierarchical level of power system reliability studies; i.e., loss of load probability (LOLP), loss of load hours (LOLH) and loss of load expectation (LOLE). The results will be compared with those obtained using other models that are well known in the econometric field; i.e., vector autoregressive models (VAR).

scholarly journals Wind Turbines with Truncated Blades May Be a Possibility for Dense Wind Farms

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1810 ◽  
Author(s):  
Shyuan Cheng ◽  
Yaqing Jin ◽  
Leonardo P. Chamorro
Keyword(s):  
Wind Turbines ◽  
Power Output ◽  
Large Scale ◽  
Outer Region ◽  
Wind Farms ◽  
Mixing Enhancement ◽  
Incoming Flow ◽  
Economic Optimization ◽  
Blade Length ◽  
The Impact

We experimentally explored the impact of a wind turbine with truncated blades on the power output and wake recovery, and its effects within 2 × 3 arrays of standard units. The blades of the truncated turbine covered a fraction of the outer region of the rotor span and replaced with a zero-lift structure around the hub, where aerodynamic torque is comparatively low. This way, the incoming flow around the hub may be used as a mixing enhancement mechanism and, consequently, to reduce the flow deficit in the wake. Particle image velocimetry was used to characterize the incoming flow and wake of various truncated turbines with a variety of blade length ratios L / R = 0.6 , 0.7, and 1, where L is the length of the working section of the blade of radius R. Power output was obtained at high frequency in each of the truncated turbines, and also at downwind units within 2 × 3 arrays with streamwise spacing of Δ x / d T = 4 , 5, and 6, with d T being the turbine diameter. Results show that the enhanced flow around the axis of the rotor induced large-scale instability and mixing that led to substantial power enhancement of wind turbines placed 4 d T downwind of the L / R = 0.6 truncated units; this additional power is still relevant at 6 d T . Overall, the competing factors defined by the expected power reduction of truncated turbines due to the decrease in the effective blade length, the need for reduced components of the truncated units, and enhanced power output of downwind standard turbines suggest a techno-economic optimization study for potential implementation.

scholarly journals Improved Control Strategy of MMC–HVDC to Improve Frequency Support of AC System

2020 ◽  
Vol 10 (20) ◽  
pp. 7282
Author(s):  
Zicong Zhang ◽  
Junghun Lee ◽  
Gilsoo Jang
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Control Method ◽  
Short Circuit ◽  
Synchronous Generator ◽  
Frequency Stability ◽  
Offshore Wind ◽  
Inertial Response ◽  
Control Evaluation ◽  
The Impact

With the continuous development of power electronics technology, variable-speed offshore wind turbines that penetrated the grid system caused the problem of inertia reduction. This study investigates the frequency stability of synchronous, offshore wind-farm integration through a modular-multilevel-converter high-voltage direct-current (MMC–HVDC) transmission system. When full-scale converter wind turbines (type 4) penetrate the AC grid, the AC system debilitates, and it becomes difficult to maintain the AC system frequency stability. In this paper, we present an improved inertial-response-control method to solve this problem. The mathematical model of the synchronous generator is based on the swing equation and is theoretically derived by establishing a MMC–HVDC. Based on the above model, the inertia constant is analyzed using a model that integrates the MMC–HVDC and offshore synchronous generator. With the new improved control method, a more sensitive and accurate inertia index can be obtained using the formula related to the effective short-circuit ratio of the AC system. Moreover, it is advantageous to provide a more accurate inertial control evaluation for AC systems under various conditions. Furthermore, the impact of the MMC–HVDC on system safety is assessed based on the capacitor time constant. This simulation was implemented using the PSCAD/EMTDC platform.

Distance Relay Impedance Measuring Problems in Presence of Wind Farms

2016 ◽  
Vol 1 (3) ◽  
pp. 464
Author(s):  
Farhad Namdari ◽  
Fatemeh Soleimani ◽  
Esmaeel Rokrok
Keyword(s):  
Power Systems ◽  
Large Scale ◽  
Electrical Power ◽  
Wind Farms ◽  
Renewable Sources ◽  
Fundamental Frequencies ◽  
Fault Resistance ◽  
Distance Relays ◽  
Increasing Demand ◽  
The Impact

<p><em>Environmental concerns along with the increasing demand on electrical power, have led to power generation of renewable sources like wind. Connecting wind turbines in large scale powers with transmission network makes new challenges like the impact of these renewable sources on power system protection. This paper studies the impact of fault resistance and its location on voltage and current fundamental frequencies of faulted lines connected to DFIG based wind farms and it will be demonstrated that because of the large differences between these frequencies, impedance measuring of distance relays is inefficient. Hence in these power systems using conventional impedance measurements is not suitable anymore and new impedance measuring approaches are required in distance relays.</em></p>

scholarly journals Noise assessment of the small-scale wind farm

2019 ◽  
Vol 112 ◽  
pp. 02011
Author(s):  
Cristian-Gabriel Alionte ◽  
Daniel-Constantin Comeaga
Keyword(s):  
Power Systems ◽  
Large Scale ◽  
Wind Farm ◽  
Wind Farms ◽  
Small Scale ◽  
Large Power ◽  
Small Power ◽  
Noise Assessment ◽  
The Impact

The importance of renewable energy and especially of eolian systems is growing. For this reason, we propose the investigation of an important pollutant - the noise, which has become so important that European Commission and European Parliament introduced Directive 2002/49/CE relating to the assessment and management of environmental noise. So far, priority has been given to very large-scale systems connected to national energy systems, wind farms whose highly variable output power could be regulated by large power systems. Nowadays, with the development of small storage capacities, it is feasible to install small power wind turbines in cities of up to 10,000 inhabitants too. As a case study, we propose a simulation for a rural locality where individual wind units could be used. This specific case study is interesting because it provides a new perspective of the impact of noise on the quality of life when the use of this type of system is implemented on a large scale. This option, of distributed and small power wind turbine, can be implemented in the future as an alternative or an adding to the common systems.

scholarly journals Increase of Transient Stability Level of Gas Turbine Power Plant Using FACTS

2019 ◽  
Vol 139 ◽  
pp. 01049
Author(s):  
Sergey Solodyankin ◽  
Andrey Pazderin
Keyword(s):  
Power Systems ◽  
Mathematical Models ◽  
Gas Turbine ◽  
Power Plants ◽  
Transient Stability ◽  
Positive Impact ◽  
Short Circuit ◽  
Important Conclusion ◽  
Facts Devices ◽  
The Impact

The article is devoted to the development of the mathematical models of modern devices of flexible alternating current transmission systems (FACTS) when calculating the modes and stability of power systems and to the analysis of influence of the specified devices on transient stability of the generators. The considered scheme contains the generators with the gas turbine drive that have electromechanical parameters providing lower level of transient stability compared to units of higher power rating, which in some cases requires implementation of measures for transient stability enhancement. As examples of FACTS the following devices have been considered: compensating device based on voltage- sourced converter (STATCOM), static synchronous series compensator (SSSC) and the unified power flow controller (UPFC). The known examples of mathematical models of FACTS devices vary in complexity. For a preliminary assessment of the effectiveness of the FACTS devices, it is proposed to use simplified models that adequately reflect their impact on transients. The use of models made it possible to establish a positive impact of the devices on transient stability of generating equipment in case of short circuits in the electric network. The important conclusion here is that the use of the UPFC device based on two converters (with a corresponding increase in cost) compared to one converter device (STATCOM or SSSC) slightly increases the level of transient stability and the limit time of short circuit disconnection. The proposed method of simulating the FACTS devices is suitable for numerical calculations of transient processes in electric power systems, in particular, to estimate the impact on the transient stability level of the parallel operation of power plants in case of disturbances.

Variable-speed Wind Turbines with Doubly-fed Induction Generators Part II: Power System Stability

2002 ◽  
Vol 26 (3) ◽  
pp. 171-188 ◽  
Author(s):  
Vladislav Akhmatov
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Short Circuit ◽  
Power Grid ◽  
System Stability ◽  
Variable Speed ◽  
Electrical Currents ◽  
Induction Generators ◽  
Doubly Fed Induction Generators ◽  
Doubly Fed

This article describes the second part of a larger investigation of dynamic interaction between variable-speed wind turbines equipped with doubly-fed induction generators (DFIG) and the power grid. A simulation model is applied for dynamic stability investigations, with the entire power grid subjected to a short-circuit fault. During the grid disturbances, the DFIG converter is found to be the most sensitive part of the wind turbine. Therefore the electrical currents are determined using the transient generator model. The converter action is crucial for wind turbine operation associated with such disturbances, especially regarding tripping or uninterrupted operation.

Sign in / Sign up

Export Citation Format

Share Document