An Autograft for Anterior Cruciate Ligament Reconstruction Results in Better Biomechanical Performance and Tendon-Bone Incorporation Than Does a Hybrid Graft in a Rat Model

2020 ◽  
Vol 48 (14) ◽  
pp. 3515-3524
Author(s):  
Hong-De Wang ◽  
Tian-Rui Wang ◽  
Yao Sui ◽  
Juan Wang ◽  
Wei Chen ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Failure Load ◽  
Cruciate Ligament ◽  
Biomechanical Testing ◽  
Bone Tunnel ◽  
Histological Evaluation ◽  
New Bone Formation ◽  
Volume Of Interest ◽  
Anterior Cruciate

Background: The biomechanical and tendon-bone incorporation properties of allograft-augmented hybrid grafts for anterior cruciate ligament (ACL) reconstruction compared with traditional autografts are unknown. Hypothesis: Using an autograft for ACL reconstruction yields better results on biomechanical testing, radiographic analysis, and histological evaluation versus using a hybrid graft. Study Design: Controlled laboratory study. Methods: A total of 66 adult male Sprague Dawley rats underwent unilateral ACL reconstruction with an autograft (AT group; n = 33) or a hybrid graft (HB group; n = 33). The grafts used in both groups were harvested from the peroneus longus tendon and were fixed by suturing to the surrounding periosteum. Samples were harvested for biomechanical testing, micro–computed tomography (CT), and histological evaluation at 4, 8, and 12 weeks postoperatively. Bone tunnels on the femoral and tibial sides were divided into 3 subregions: intra-articular (IA), midtunnel (MT), and extra-articular (EA). A cylinder-like volume of interest in the bone tunnel and a tubular-like volume of interest around the bone tunnel were used to evaluate new bone formation and bone remodeling, respectively, via micro-CT. Results: In the AT group, there were significantly higher failure loads and stiffness at 8 weeks (failure load: 3.04 ± 0.40 vs 2.09 ± 0.54 N, respectively; P = .006) (stiffness: 3.43 ± 0.56 vs 1.75 ± 0.52 N/mm, respectively; P < .001) and 12 weeks (failure load: 9.10 ± 1.13 vs 7.14 ± 0.94 N, respectively; P = .008) (stiffness: 4.45 ± 0.75 vs 3.36 ± 0.29 N/mm, respectively; P = .008) than in the HB group. With regard to new bone formation in the bone tunnel, in the AT group, the bone volume/total volume (BV/TV) was significantly higher than in the HB group on the tibial side at 8 weeks (IA: 22.21 ± 4.98 vs 5.16 ± 3.98, respectively; P < .001) (EA: 19.66 ± 7.19 vs 10.85 ± 2.16, respectively; P = .030) and 12 weeks (IA: 30.50 ± 5.04 vs 17.11 ± 7.31, respectively; P = .010) (MT: 21.15 ± 2.58 vs 15.55 ± 4.48, respectively; P = .041) (EA: 20.75 ± 3.87 vs 10.64 ± 3.94, respectively; P = .003). With regard to bone remodeling around the tunnel, the BV/TV was also significantly higher on the tibial side at 8 weeks (MT: 33.17 ± 8.05 vs 15.21 ± 7.60, respectively; P = .007) (EA: 25.19 ± 6.38 vs 13.94 ± 7.10, respectively; P = .030) and 12 weeks (IA: 69.46 ± 4.45 vs 47.80 ± 6.16, respectively; P < .001) (MT: 33.15 ± 3.88 vs 13.76 ± 4.07, respectively; P < .001) in the AT group than in the HB group. Sharpey-like fibers had formed at 8 weeks in the AT group. A large number of fibroblasts withdrew at 12 weeks. In the AT group, the width of the interface was significantly narrower at 4 weeks (85.86 ± 17.49 vs 182.97 ± 14.35 μm, respectively; P < .001), 8 weeks (58.86 ± 10.99 vs 90.15 ± 11.53 μm, respectively; P = .002), and 12 weeks (42.70 ± 7.96 vs 67.29 ± 6.55 μm, respectively; P = .001) than in the HB group. Conclusion: Using an autograft for ACL reconstruction may result in improved biomechanical properties and tendon-bone incorporation compared with a hybrid graft. Clinical Relevance: Augmenting small autografts with allograft tissue may result in decreased biomechanical performance and worse tendon-bone incorporation, increasing the risk of graft failure.

scholarly journals The effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament reconstruction

2018 ◽  
Vol 7 (5) ◽  
pp. 327-335 ◽  
Author(s):  
Y. Sato ◽  
R. Akagi ◽  
Y. Akatsu ◽  
Y. Matsuura ◽  
S. Takahashi ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Anterior Cruciate Ligament Reconstruction ◽  
Acl Reconstruction ◽  
Bone Healing ◽  
Ligament Reconstruction ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
Femoral Bone ◽  
Cruciate Ligament Reconstruction ◽  
Anterior Cruciate

Objectives To compare the effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament (ACL) reconstruction animal model. Methods Anterior cruciate ligament reconstruction using the plantaris tendon as graft material was performed on both knees of 24 rabbits (48 knees) to mimic ACL reconstruction by two different suspensory fixation devices for graft fixation. For the adjustable fixation device model (Socket group; group S), a 5 mm deep socket was created in the lateral femoral condyle (LFC) of the right knee. For the fixed-loop model (Tunnel group; group T), a femoral tunnel penetrating the LFC was created in the left knee. Animals were sacrificed at four and eight weeks after surgery for histological evaluation and biomechanical testing. Results Histologically, both groups showed a mixture of direct and indirect healing patterns at four weeks, whereas only indirect healing patterns were observed in both groups at eight weeks. No significant histological differences were seen between the two groups at four and eight weeks in the roof zone (four weeks, S: mean 4.8 sd 1.7, T: mean 4.5 sd 0.5, p = 0.14; eight weeks, S: mean 5.8 sd 0.8, T: mean 4.8 sd 1.8, p = 0.88, Mann-Whitney U test) or side zone (four weeks, S: mean 5.0 sd 1.2, T: mean 4.8 sd 0.4, p = 0.43; eight weeks, S: mean 5.3 sd 0.8,T: mean 5.5 sd 0.8, p = 0.61, Mann-Whitney U test) . Similarly, no significant difference was seen in the maximum failure load between group S and group T at four (15.6 sd 9.0N and 13.1 sd 5.6N) or eight weeks (12.6 sd 3.6N and 17.1 sd 6.4N, respectively). Conclusion Regardless of bone tunnel configuration, tendon-bone healing after ACL reconstruction primarily occurred through indirect healing. No significant histological or mechanical differences were observed between adjustable and fixed-loop femoral cortical suspension methods. Cite this article: Y. Sato, R. Akagi, Y. Akatsu, Y. Matsuura, S. Takahashi, S. Yamaguchi, T. Enomoto, R. Nakagawa, H. Hoshi, T. Sasaki, S. Kimura, Y. Ogawa, A. Sadamasu, S. Ohtori, T. Sasho. The effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament reconstruction: An animal study. Bone Joint Res 2018;7:327–335. DOI: 10.1302/2046-3758.75.BJR-2017-0238.R2.

The Effect of Graft Pretensioning on Bone Tunnel Diameter and Bone Formation After Anterior Cruciate Ligament Reconstruction in a Rat Model: Evaluation With Micro–Computed Tomography

2017 ◽  
Vol 45 (6) ◽  
pp. 1349-1358 ◽  
Author(s):  
Jian-Chun Zong ◽  
Richard Ma ◽  
Hongsheng Wang ◽  
Guang-Ting Cong ◽  
Amir Lebaschi ◽  
...  
Keyword(s):  
Bone Formation ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
New Bone Formation ◽  
Micro Computed Tomography ◽  
Load To Failure ◽  
Tunnel Diameter ◽  
Anterior Cruciate ◽  
Bone Tunnels

Background: Moderate graft pretensioning in anterior cruciate ligament (ACL) reconstruction is paramount to restore knee stability and normalize knee kinematics. However, little is known about the effect of graft pretensioning on graft-to-bone healing after ACL reconstruction. Hypothesis: Moderate graft pretensioning will improve bone formation within the bone tunnel after ACL reconstruction, resulting in superior load to failure. Study Design: Controlled laboratory study. Methods: 67 male Sprague-Dawley rats underwent unilateral ACL reconstruction with a flexor digitorum longus tendon autograft. The graft was subjected to pretensioning forces of 0 N, 5 N, or 10 N. Custom-made external fixators were used for knee immobilization postoperatively. Rats were euthanized for biomechanical load-to-failure testing (n = 45) and micro–computed tomography (μCT) examination (n = 22) at 3 and 6 weeks after surgery. Three regions of each femoral and tibial bone tunnel (aperture, middle, and tunnel exit) were chosen for measurement of tunnel diameter and new bone formation. Results: Biomechanical tests revealed significantly higher load-to-failure in the 5-N graft pretensioned group compared with the 0- and 10-N groups at 3 weeks (8.58 ± 2.67 N vs 3.96 ± 1.83 N and 4.46 ± 2.62 N, respectively) and 6 weeks (16.56 ± 3.50 N vs 10.82 ± 1.97 N and 7.35 ± 2.85 N, respectively) after surgery ( P < .05). The mean bone tunnel diameters at each of the 3 regions were significantly smaller in the 5-N group, at both the femoral and tibial tunnel sites, than in the 0- and 10-N groups ( P < .05). At 3 and 6 weeks postoperatively, the bone mineral density, bone volume fraction, and connectivity density around the aperture and middle regions of the tibial bone tunnels were all significantly higher in the 5-N group compared with the 0- and 10-N groups ( P < .05). In the aperture and middle regions of the femoral bone tunnels, pretensioning at either 5 or 10 N resulted in increased bone formation compared with the nonpretensioned group at 3 weeks postoperatively. No differences were found in bone formation between any of the 3 femoral tunnel regions at 6 weeks. Conclusion: Graft pretensioning can stimulate new bone formation and improve tendon-to-bone tunnel healing after ACL reconstruction. Clinical Relevance: Optimal graft pretensioning force in ACL reconstruction can improve bone tunnel healing. Further study is necessary to understand the mechanisms underlying the effect of graft pretensioning on healing at the bone-tunnel interface.

scholarly journals In Vitro Testing of 2 Adjustable-Loop Cortical Suspensory Fixation Systems Versus Interference Screw for Anterior Cruciate Ligament Reconstruction

2021 ◽  
Vol 9 (9) ◽  
pp. 232596712110316
Author(s):  
Gerardo L. Garcés ◽  
Oscar Martel ◽  
Alejandro Yánez ◽  
Ignacio Manchado-Herrera ◽  
Luci M. Motta
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Failure Load ◽  
Cruciate Ligament ◽  
Interference Screw ◽  
Yield Load ◽  
Ultimate Failure Load ◽  
Significant Difference ◽  
Ultimate Failure ◽  
Anterior Cruciate

Background: It is not clear whether the mechanical strength of adjustable-loop suspension devices (ALDs) in anterior cruciate ligament (ACL) reconstruction is device dependent and if these constructs are different from those of an interference screw. Purpose: To compare the biomechanical differences of 2 types of ALDs versus an interference screw. Study Design: Controlled laboratory study. Methods: ACL reconstruction was performed on porcine femurs and bovine extensor tendons with 3 types of fixation devices: interference screw, UltraButton (UB) ALD, and TightRope (TR) ALD (n = 10 for each). In addition to specimen testing, isolated testing of the 2 ALDs was performed. The loading protocol consisted of 3 stages: preload (static 150 N load for 5 minutes), cyclic load (50-250 N at 1 Hz for 1000 cycles), and load to failure (crosshead speed 50 mm/min). Displacement at different cycles, ultimate failure load, yield load, stiffness, and failure mode were recorded. Results: In specimen testing, displacement of the ALDs at the 1000th cycle was similar (3.42 ± 1.34 mm for TR and 3.39 ± 0.92 mm for UB), but both were significantly lower than that of the interference screw (7.54 ± 3.18 mm) ( P < .001 for both). The yield load of the UB (547 ± 173 N) was higher than that of the TR (420 ± 72 N) ( P = .033) or the interference screw (386 ± 51 N; P = .013), with no significant difference between the latter 2. In isolated device testing, the ultimate failure load of the TR (862 ± 64 N) was significantly lower than that of the UB (1879 ± 126 N) ( P < .001). Conclusion: Both ALDs showed significantly less displacement in cyclic loading at ultimate failure than the interference screw. The yield load of the UB was significantly higher than that of the other 2. The ultimate failure occurred at a significantly higher load for UB than it did for TR in isolated device testing. Clinical Relevance: Both UB and TR provided stronger fixation than an interference screw. Although difficult to assess, intrinsic differences in the mechanical properties of these ALDs may affect clinical outcomes.

A Single Cycle Study of Screw Fixation in Anterior Cruciate Ligament Reconstruction

2008 ◽  
Author(s):  
M. Chizari ◽  
B. Wang ◽  
M. Snow
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Screw Fixation ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
Anatomical Reconstruction ◽  
Initial Stability ◽  
History Of ◽  
Post Traumatic ◽  
Anterior Cruciate

The natural history of Anterior Cruciate rupture is one of progressive deterioration of knee function, with the development of instability, meniscal tears and post traumatic osteoarthritis. The current surgical approach is for anatomical reconstruction using a biological tissue autograft. It is well understood that the initial stability is dependent on the strength of the fixation rather than the strength of the graft, until the graft becomes biologically incorporated in the bone tunnel. A study was carried out to better understand postoperative internal bone stresses in anterior cruciate ligament (ACL) reconstruction surgery. The mechanical aspects of an interface screw fixation were examined both experimentally and numerically, with the aim to minimize deleterious effects in ACL reconstruction. The tibial cortical/cancellous bony tunnel and the stress pattern resulting from the screw fixation in the tunnel are investigated.

Two-Stage Revision Anterior Cruciate Ligament Reconstruction: A Systematic Review of Bone Graft Options for Tunnel Augmentation

2019 ◽  
Vol 48 (3) ◽  
pp. 767-777 ◽  
Author(s):  
Hytham S. Salem ◽  
Derek P. Axibal ◽  
Michelle L. Wolcott ◽  
Armando F. Vidal ◽  
Eric C. McCarty ◽  
...  
Keyword(s):  
Systematic Review ◽  
Anterior Cruciate Ligament ◽  
Bone Graft ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
Allograft Bone ◽  
Graft Material ◽  
Revision Acl Reconstruction ◽  
Anterior Cruciate

Background: No consensus is available regarding the optimal choice of bone graft material for bone tunnel augmentation in revision anterior cruciate ligament (ACL) surgery. Purpose: To compare the outcomes of different bone graft materials for staged revision ACL reconstruction. Study design: Systematic review. Methods: A systematic review using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines was performed. PubMed, EMBASE, and the Cochrane Library were queried through use of the terms anterior cruciate ligament and revision to identify all studies reporting outcomes of bone tunnel grafting in 2-stage revision ACL reconstruction. Data extracted included indications for 2-stage surgery, surgical technique, graft material, time between surgeries, rehabilitation protocols, physical examination findings, patient-reported outcomes, and radiographic and histologic findings. Results: The analysis included 7 studies with a total of 234 patients. The primary outcome in 2 studies was graft incorporation (mean follow-up, 8.8 months), whereas the other 5 studies reported clinical outcomes with follow-up mean ± SD of 4.2 ± 2.1 years. The indication for bone grafting and between-stage protocol varied among studies. Autograft was used in 4 studies: iliac crest bone autograft (ICBG, n = 3) and tibial bone autograft (TBA, n = 1). In 2 studies, the authors investigated the outcomes of allograft: allograft bone matrix (ABM) and allograft bone chips (AC). Finally, 1 study compared ICBG to a synthetic bone substitute. Radiographic evaluation of bone graft integration after the first stage was reported in 4 studies, with an average duration of 4.9 months. In 4 studies, the authors reported the time interval between first and second surgeries, with an average of 6.1 months for ICBG compared with 8.7 months for allogenic and synthetic grafts. Revision ACL graft failure rates were reported by 5 studies, including 1 study with ABM (6.1%), 1 study with AC (8.3%), 1 study with TBA (0%), and 2 studies with ICBG (0% and 2%). Conclusion: The indications for staged ACL reconstruction and the rehabilitation protocol between stages need to be clearly established. The available data indicate that autograft for bone tunnel grafting in 2-stage ACL revision may be associated with a lower risk of revision ACL reconstruction graft failure compared with allograft bone.

Effect of Tunnel-Graft Length on the Biomechanics of Anterior Cruciate Ligament-Reconstructed Knees

2008 ◽  
Vol 36 (11) ◽  
pp. 2158-2166 ◽  
Author(s):  
Thore Zantop ◽  
Mario Ferretti ◽  
Kevin M. Bell ◽  
Peter U. Brucker ◽  
Lars Gilbertson ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Structural Properties ◽  
Acl Reconstruction ◽  
Femoral Tunnel ◽  
Cruciate Ligament ◽  
Knee Kinematics ◽  
Bone Tunnel ◽  
Anterior Cruciate ◽  
Graft Length

Background In anterior cruciate ligament (ACL) reconstruction using hamstring grafts, the graft can be looped, resulting in an increased graft diameter but reducing graft length within the tunnels. Hypothesis After 6 and 12 weeks, structural properties and knee kinematics after soft tissue ACL reconstruction with 15 mm within the femoral tunnel will be significantly inferior when compared with the properties of ACL reconstruction with 25 mm in the tunnel. Study Design Controlled laboratory study. Methods In an intra-articular goat model, 36 ACL reconstructions using an Achilles tendon split graft were performed with 15-mm (18 knees) and 25-mm (18 knees) graft length in the femoral tunnel. Animals were sacrificed 6 weeks and 12 weeks after surgery and knee kinematics was tested. In situ forces as well as the structural properties were determined and compared with those in an intact control group. Histologic analyses were performed in 2 animals in each group 6 and 12 weeks postoperatively. Statistical analysis was performed using a 2-factor analysis of variance test. Results Anterior cruciate ligament reconstructions with 15 mm resulted in significantly less anterior tibial translation after 6 weeks ( P < .05) but not after 12 weeks. Kinematics after 12 weeks and in situ forces of the replacement grafts at both time points showed no statistically significant differences. Stiffness, ultimate failure load, and ultimate stress revealed no statistically significant differences between the 15-mm group and the 25-mm group. Conclusion The results suggest that there is no negative correlation between short graft length (15 mm) in the femoral tunnel and the resulting knee kinematics and structural properties. Clinical Relevance Various clinical scenarios exist in which the length of available graft that could be pulled into the bone tunnel (femoral or tibial) could be in question. To address this concern, this study showed that reducing the tendon graft length in the femoral bone tunnel from 25 mm to 15 mm did not have adverse affects in a goat model.

scholarly journals Anterior cruciate ligament reconstruction in a rabbit model using a silk-collagen scaffold modified by hydroxyapatite at both ends: a histological and biomechanical study

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Fanggang Bi ◽  
Yangdi Chen ◽  
Junqi Liu ◽  
Yafei Wang ◽  
Danfeng Xu ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Biomechanical Testing ◽  
Rabbit Model ◽  
Collagen Scaffold ◽  
Biomechanical Study ◽  
Collagen I ◽  
Bone Interface ◽  
Anterior Cruciate

Abstract Background To investigate osteointegration at the graft-bone interface and the prevention of osteoarthritis after anterior cruciate ligament (ACL) reconstruction using a silk-collagen scaffold with both ends modified by hydroxyapatite (HA) in a rabbit model. Methods The HA/silk-collagen scaffold was fabricated using a degummed, knitted silk scaffold, collagen I matrix, and simulated body fluid (SBF). The HA/silk-collagen scaffold was rolled up to make a graft for replacing the native ACL in the experimental group (HA group), and the silk-collagen scaffold was used in the control (S group). All specimens were harvested at 16 weeks postoperatively to evaluate graft-bone healing and osteoarthritis prevention. Results Histological staining revealed the massive formation of more mature bone at the tendon-bone interface, and immunohistochemistry staining revealed more collagen I and osteocalcin deposition in the HA group than in the S group. Higher signals indicating more bone mineral formation were detected in the HA group than in the S group, which was consistent with the results of biomechanical testing. Better osteoarthritis prevention was also observed in the HA group, indicating a more stable knee joint in the HA group than in the S group. Conclusion The HA/silk-collagen scaffold promotes osteointegration at the tendon-bone interface after ACL reconstruction and has great potential for clinical applications.

Bone Tunnel Placement Determination Method for 3D Images and Its Evaluation for Anterior Cruciate Ligament Reconstruction

2020 ◽  
Vol 16 (5) ◽  
pp. 491-498
Author(s):  
Kento Morita ◽  
Manabu Nii ◽  
Min-Sung Koh ◽  
Kaori Kashiwa ◽  
Hiroshi Nakayama ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
X Ray ◽  
Reconstruction Surgery ◽  
Quadrant Method ◽  
Knee Mri ◽  
Anterior Cruciate ◽  
Bone Tunnels

Background: Anterior cruciate ligament (ACL) injury causes knee instability which affects sports activity involving cutting and twisting motions. The ACL reconstruction surgery replaces the damaged ACL with artificial one which is fixed to the bone tunnels opened by the surgeon. The outcome of the ACL reconstruction is strongly related to the placement of the bone tunnels, therefore, the optimization of tunnel drilling technique is an important factor to obtain satisfactory surgical results. Aims: The quadrant method is used for the post-operative evaluation of the ACL reconstruction surgery, which evaluates the bone tunnel opening sites on the lateral 2D X-ray radiograph. Methods: For the purpose of applying the quadrant method to the pre-operative knee MRI, we have synthesized the pseudo lateral 2D X-ray radiograph from the patients' knee MRI. This paper proposes a computer-aided surgical planning system for the ACL reconstruction. The proposed system estimates appropriate bone tunnel opening sites on the pseudo lateral 2D X-ray radiograph synthesized from the pre-operative knee MRI. Results: In the experiment, the proposed method was applied to 98 subjects including subjects with osteoarthritis. The experimental results showed that the proposed method can estimate the bone tunnel opening sites accurately. The other experiment using 36 healthy patients showed that the proposed method is robust to the knee shape deformation caused by disease. Conclusion: It is verified that the proposed method can be applied to subjects with osteoarthritis.

scholarly journals Can the body slope of interference screw affect initial stability of reconstructed anterior cruciate ligament?: An in-vitro investigation

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Nazanin Daneshvarhashjin ◽  
Mahmoud Chizari ◽  
Javad Mortazavi ◽  
Gholamreza Rouhi
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Bone Tunnel ◽  
Reconstruction Process ◽  
Interference Screws ◽  
Bone Screw ◽  
Initial Stability ◽  
Tunnel Diameter ◽  
Anterior Cruciate

Abstract Background Superior biomechanical performance of tapered interference screws, compared with non-tapered screws, with reference to the anterior cruciate ligament (ACL) reconstruction process, has been reported in the literature. However, the effect of tapered interference screw’s body slope on the initial stability of ACL is poorly understood. Thus, the main goal of this study was to investigate the effect of the interference screw’s body slope on the initial stability of the reconstructed ACL. Methods Based on the best screw-bone tunnel diameter ratios in non-tapered screws, two different tapered interference screws were designed and fabricated. The diameters of both screws were equal to bone tunnel diameter in one-third of their length from screw tip, then they were gradually increased by 1mm, in the lower slope (LSTIS), and 2 mm, in the higher slope (HSTIS) screws. To simulate the ACL reconstruction, sixteen soft tissue grafts were fixed, using HSTIS and LSTIS, in synthetic bone blocks. Through applying sub-failure cyclic incremental tensile load, graft-bone-screw construct’s stiffness and graft laxity in each cycle, also through applying subsequent step of loading graft to the failure, maximum load to failure, and graft’s mode of failure were determined. Accordingly, the performance of the fabricated interference screws was compared with each other. Results HSTIS provides a greater graft-bone-screw construct stiffness, and a lower graft laxity, compared to LSTIS. Moreover, transverse rupture of graft fibers for LSTIS, and necking of graft in the HSTIS group were the major types of grafts’ failure. Conclusions HSTIS better replicates the intact ACL’s behavior, compared to LSTIS, by causing less damage in graft’s fibers; reducing graft laxity; and increasing fixation stability. Nonetheless, finding the optimal slope remains as an unknown and can be the subject of future studies.

Peroneus Longus Tendon Autograft is a Safe and Effective Alternative for Anterior Cruciate Ligament Reconstruction

2018 ◽  
Vol 32 (08) ◽  
pp. 804-811 ◽  
Author(s):  
Fu-Dong Shi ◽  
Daniel Edward Hess ◽  
Jin-Zeng Zuo ◽  
Shi-Jie Liu ◽  
Xue-Chen Wang ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Biomechanical Testing ◽  
Peroneus Longus Tendon ◽  
Longus Tendon ◽  
Peroneus Longus ◽  
Functional Scores ◽  
Anterior Cruciate ◽  
Grade Iii

AbstractThe ipsilateral peroneus longus tendon (PLT) was utilized as an autograft for anterior cruciate ligament (ACL) reconstruction of patients with acute ACL rupture and grade III medial collateral ligament (MCL) injury. We investigated the efficacy and safety of this alternative autograft compared with autologous hamstring tendon (HT). Biomechanical testing of the graft options was performed and compared with the native ACL. Thirty-eight patients with acute ACL ruptures and grade III MCL injuries were treated with ACL reconstruction with a doubled autologous PLT or quadrupled autologous HT. Knee stability and function was evaluated clinically with the Lachman test and KT-2000 arthometer as well as subjectively with functional scores. Effects on the donor ankle were evaluated by biomechanical testing. The ultimate tensile strengths of doubled PLT and quadrupled HT were significantly higher than that of the native ACL and the ultimate tensile strength of doubled PLT was comparable with that of quadrupled HT. There were no significant differences in clinical or functional scores between the two groups. There were no significant differences in pre- and postoperative biomechanical testing of the donor ankle. PLT is a suitable alternative autograft for an ACL reconstruction in patients with a concomitant grade III MCL injury without a significant biomechanical disadvantage to the ankle donor site.

Sign in / Sign up

Export Citation Format

Share Document