Comparison of 5 Rectal Preparation Strategies for Prostate MRI and Impact on Image Quality

2021 ◽  
pp. 084653712110337
Author(s):  
Paul Sathiadoss ◽  
Mohammad Haroon ◽  
Heba Osman ◽  
Faraz Ahmad ◽  
Philip Papadatos ◽  
...  

Purpose: To compare 5 different rectal preparation strategies for prostate MRI. Methods: This 5-arm quality-assurance study evaluated 56 patients per arm (280 patients) including: no preparation, clear-fluids diet (CFD) beginning at 00:00 hours on the day of MRI, Fleet®-enema, enema + CFD, enema + CFD + IV-antispasmodic agent. The study was powered to 0.80 with alpha-error of 0.05. Three blinded radiologists independently evaluated T2-Weighted (T2W) and Diffusion Weighed Imaging (DWI) for: rectal diameter (maximal AP diameter), rectal content (stool, fluid, gas), rectal motion, T2W/DWI image quality, T2W image sharpness and DWI susceptibility artifact using 5-point Likert scales. Overall comparisons were performed using analysis of variance (ANOVA) and Kruskal-Wallis, with pair-wise comparisons using paired t-tests and Wilcoxon sign-rank tests. Results: Rectal diameter and amount of gas were lower in enema compared to non-enema groups (p < 0.001), with smallest diameter and least gas in the enema + CFD + IV-antispasmodic group (p = 0.022-<0.001). T2W image quality and sharpness were highest in the enema + CFD groups (p < 0.001) with no difference comparing enema + CFD with/without IV-antispasmodic (p = 0.064, 0.084). Motion artifact was least in enema + CFD + IV-antispasmodic group compared to all other groups (p < 0.001), followed by the enema + CFD group (p = 0.008-<0.001). DWI image quality was highest (p < 0.001) and DWI susceptibility artifact lowest (p < 0.001) in the enema + CFD groups (p < 0.001) and did not differ comparing enema + CFD with/without anti-spasmodic (p = 0.058-0.202). Conclusions: Use of enema + clear-fluids diet before prostate MRI yields the highest T2W and DWI image quality with the least DWI artifact. IV-antispasmodic use reduces motion on T2W but does not improve image quality on T2W or DWI, or lessen DWI artifact compared to enema + clear-fluids diet.

Author(s):  
Amel F. Alzain ◽  
Nagwan Elhussein ◽  
Ibtisam Abdallah Fadulelmulla ◽  
Amna Mohamed Ahmed ◽  
M. E. Elbashir ◽  
...  

Abstract Background Artifacts have significantly degraded the quality of computed tomography (CT) images, to the extent of making them unusable for diagnosis. The types of artifact that could be used are as follows: (a) streaking, which is commonly due to a discrepancy in a single measurement, (b) shading, which is due to a group of channels deviating gradually from the true measurement, (c) rings, which are due to errors in individual detector calibration and (d) distortion, which is due to helical reconstruction. It is occasionally possible to avoid scanning of a bony area, by means of changing the postion of the patient. Thus, this study aimed to evaluate the common artifacts that affect image quality and the method of correction to improve image quality. Results The data were collected by distributing a questionnaire to the CT technologist at different hospitals about the most common type of artifacts in the CT images, source of artifacts and methods of correction. A total of 95 CT technologists responded to the questionnaire, which included 67% males and 33% females. Most of the participants (70%) were experienced CT technologists, and 61% of the participants had not done any subspecialty CT scan courses. The most common artifact used in the CT departments was motion artifact in brain CT (73%), and the best method to reduce motion artifact was patient preparation (87%). Conclusions The most common shown artifact in this study was motion artifact, and the common cause was the patient-based artifact. It is important to understand why objects occur and how they could be prevented or suppressed to improve image quality.


2014 ◽  
Vol 42 (3) ◽  
pp. 689-697 ◽  
Author(s):  
Christopher Lim ◽  
Jeff Quon ◽  
Matt McInnes ◽  
Wael M. Shabana ◽  
Mohamed El-Khodary ◽  
...  

2021 ◽  
Vol 11 (16) ◽  
pp. 7199
Author(s):  
Dapu Pi ◽  
Juan Liu

In this article, we propose a reference light wave multiplexing scheme to increase the information capacity of computer-generated holograms. The holograms were generated by different reference light waves and superimposed together as a multiplexed hologram. A modified Gerchberg–Saxton algorithm was used to improve image quality, and different images could be reconstructed when the multiplexed hologram was illuminated by corresponding reference light waves. We performed both numerical simulations and optical experiments to demonstrate the feasibility of the proposed scheme. Numerical simulations showed that the proposed method could reconstruct multiple images successfully by a single multiplexed hologram and optical experiments are consistently good with numerical simulations. It is expected that the proposed method has great potential to be widely applied in holographic displays in the future.


2020 ◽  
Vol 17 (12) ◽  
pp. 1644-1652
Author(s):  
Melanie P. Caserta ◽  
Stephanie L. Bonnett ◽  
Melody C. La Valley ◽  
Salvatore De Meo ◽  
Andrew W. Bowman

2017 ◽  
Vol 72 (5) ◽  
pp. 428.e7-428.e12 ◽  
Author(s):  
J. Aissa ◽  
C. Thomas ◽  
L.M. Sawicki ◽  
J. Caspers ◽  
P. Kröpil ◽  
...  

2002 ◽  
Author(s):  
Yixiao Zhang ◽  
Jinglei Du ◽  
Jingguo Yang ◽  
Yangsu Zeng ◽  
Yongkang Guo ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document