Manipulating the solution environment to control the surface roughness of elastin-based polymer coatings

2021 ◽  
pp. 088532822110103
Author(s):  
Jared S Cobb ◽  
Anna S Rourke ◽  
Aiden Creel ◽  
Amol V Janorkar
Keyword(s):  
Cell Culture ◽  
Surface Roughness ◽  
Culture Media ◽  
Polymer Concentration ◽  
Three Dimensional ◽  
Polymer Coatings ◽  
Genetically Engineered ◽  
Average Roughness

Elastin-like polypeptides (ELP) have been used as a genetically-engineered, biocompatible substitute for elastin. Cell culture coatings prepared using ELP conjugated to low molecular weight polyethyleneimine (PEI) entices cells to form three-dimensional cellular aggregates that mimic their in vivo counterparts. This study seeks to control the deposition of the ELP and ELP-PEI molecules to control the roughness of the final coatings. The two polymers were coated onto three different substrates (glass, polystyrene, tissue-culture polystyrene) and the solution environment was altered by changing the polymer concentration (0.5, 1.0, 1.5 mg/mL) and/or salt concentration (None, 0.2 M phosphate buffered saline) for a total of 36 conditions. Atomic force microscopy (AFM) was used to measure the average roughness (Ra) of the samples and found that ELP coated samples had a higher Ra than their ELP-PEI counterparts. The coatings were tested for stability by performing cell culture media changes every three days for 11 days. AFM showed that the average roughness of the tested samples increased with each media change. To address this, the surfaces were crosslinked using hexamethyl diisocyanate, which minimized the change in surface roughness even when subjected to an intense sonication process. This study provides parameters to achieve elastin-based coatings with controlled roughness that can be used to support stable, long-term in vitro cell culture.

scholarly journals Development and Application of an Additively Manufactured Calcium Chloride Nebulizer for Alginate 3D-Bioprinting Purposes

2018 ◽  
Vol 9 (4) ◽  
pp. 63 ◽  
Author(s):  
Lukas Raddatz ◽  
Antonina Lavrentieva ◽  
Iliyana Pepelanova ◽  
Janina Bahnemann ◽  
Dominik Geier ◽  
...  
Keyword(s):  
Cell Culture ◽  
Culture Media ◽  
Single Cells ◽  
Matrix Material ◽  
Three Dimensional ◽  
Culture Cell ◽  
3D Bioprinting ◽  
Cacl2 Solution

Three-dimensional (3D)-bioprinting enables scientists to mimic in vivo micro-environments and to perform in vitro cell experiments under more physiological conditions than is possible with conventional two-dimensional (2D) cell culture. Cell-laden biomaterials (bioinks) are precisely processed to bioengineer tissue three-dimensionally. One primarily used matrix material is sodium alginate. This natural biopolymer provides both fine mechanical properties when gelated and high biocompatibility. Commonly, alginate is 3D bioprinted using extrusion based devices. The gelation reaction is hereby induced by a CaCl2 solution in the building chamber after material extrusion. This established technique has two main disadvantages: (1) CaCl2 can have toxic effects on the cell-laden hydrogels by oxygen diffusion limitation and (2) good printing resolution in the CaCl2 solution is hard to achieve, since the solution needs to be removed afterwards and substituted by cell culture media. Here, we show an innovative approach of alginate bioprinting based on a CaCl2 nebulizer. The device provides CaCl2 mist to the building platform inducing the gelation. The necessary amount of CaCl2 could be decreased as compared to previous gelation strategies and limitation of oxygen transfer during bioprinting can be reduced. The device was manufactured using the MJP-3D printing technique. Subsequently, its digital blueprint (CAD file) can be modified and additive manufactured easily and mounted in various extrusion bioprinters. With our approach, a concept for a more gentle 3D Bioprinting method could be shown. We demonstrated that the concept of an ultrasound-based nebulizer for CaCl2 mist generation can be used for 3D bioprinting and that the mist-induced polymerization of alginate hydrogels of different concentrations is feasible. Furthermore, different cell-laden alginate concentrations could be used: Cell spheroids (mesenchymal stem cells) and single cells (mouse fibroblasts) were successfully 3D printed yielding viable cells and stable hydrogels after 24 h cultivation. We suggest our work to show a different and novel approach on alginate bioprinting, which could be useful in generating cell-laden hydrogel constructs for e.g., drug screening or (soft) tissue engineering applications.

scholarly journals Mammary gland 3D cell culture systems in farm animals

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Laurence Finot ◽  
Eric Chanat ◽  
Frederic Dessauge
Keyword(s):  
Cell Culture ◽  
Mammary Gland ◽  
Bacterial Infections ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Farm Animals ◽  
Culture Systems ◽  
Cell Culture Systems

AbstractIn vivo study of tissue or organ biology in mammals is very complex and progress is slowed by poor accessibility of samples and ethical concerns. Fortunately, however, advances in stem cell identification and culture have made it possible to derive in vitro 3D “tissues” called organoids, these three-dimensional structures partly or fully mimicking the in vivo functioning of organs. The mammary gland produces milk, the source of nutrition for newborn mammals. Milk is synthesized and secreted by the differentiated polarized mammary epithelial cells of the gland. Reconstructing in vitro a mammary-like structure mimicking the functional tissue represents a major challenge in mammary gland biology, especially for farm animals for which specific agronomic questions arise. This would greatly facilitate the study of mammary gland development, milk secretion processes and pathological effects of viral or bacterial infections at the cellular level, all with the objective of improving milk production at the animal level. With this aim, various 3D cell culture models have been developed such as mammospheres and, more recently, efforts to develop organoids in vitro have been considerable. Researchers are now starting to draw inspiration from other fields, such as bioengineering, to generate organoids that would be more physiologically relevant. In this chapter, we will discuss 3D cell culture systems as organoids and their relevance for agronomic research.

scholarly journals Secretion of glutathione S-transferase isoforms in the seminiferous tubular fluid, tissue distribution and sex steroid binding by rat GSTM1

1999 ◽  
Vol 340 (1) ◽  
pp. 309-320 ◽  
Author(s):  
Sikha Bettina MUKHERJEE ◽  
S. ARAVINDA ◽  
B. GOPALAKRISHNAN ◽  
Sushma NAGPAL ◽  
Dinakar M. SALUNKE ◽  
...  
Keyword(s):  
Cell Culture ◽  
Germ Cell ◽  
Sertoli Cell ◽  
Sertoli Cells ◽  
Culture Media ◽  
Glutathione S Transferase ◽  
Steroid Binding ◽  
Spent Media

The seminiferous tubular fluid (STF) provides the microenvironment necessary for spermatogenesis in the adluminal compartment of the seminiferous tubule (ST), primarily through secretions of the Sertoli cell. Earlier studies from this laboratory demonstrated the presence of glutathione S-transferase (GST) in STF collected from adult rat testis and in the spent media of ST cultures. This study describes the cellular source, isoform composition and possible function of GSTs in the STF. The major GST isoforms present in STF in vivo share extensive N-terminal similarity with rat GSTM1 (rGSTM1), rGSTM2, rGSTM3 and rGST-Alpha. Molecular masses of rGSTM2, rGSTM3 and rGST-Alpha from liver and testis sources were similar, unlike STF-GSTM1, which was larger by 325 Da than its liver counterpart. Peptide digest analysis profiles on reverse-phase HPLC between liver and STF isoforms were identical, and N-terminal sequences of selected peptides obtained by digestion of the various isoforms were closely similar. The above results confirmed close structural similarity between liver and STF-GST isoforms. Active synthesis and secretion of GSTs by the STs were evident from recovery of radiolabelled GST from the spent media of ST cultures. Analysis of secreted GST isoforms showed that GST-Alpha was not secreted by the STs in vitro, whereas there was an induction of GST-Pi secretion. Detection of immunostainable GST-Mu in Sertoli cells in vitro and during different stages of the seminiferous epithelium in vivo, coupled with the recovery of radiolabelled GST from Sertoli cell-culture media, provided evidence for Sertoli cells as secretors of GST. In addition, STF of ‘Sertoli cell only’ animals showed no change in the profile of GST isoform secretion, thereby confirming Sertoli cells as prime GST secretors. Non-recovery of [35S]methionine-labelled GSTs from germ cell culture supernatants, but their presence in germ cell lysates, confirm the ability of the germ cells to synthesize, but not to release, GSTs. Functionally, STF-GSTM1 appeared to serve as a steroid-binding protein by its ability to bind to testosterone and oestradiol, two important hormones in the ST that are essential for spermatogenesis, with binding constants of < 9.8×10-7 M for testosterone and 9×10-6 M for oestradiol respectively.

99 DIFFERENTIAL GENE REGULATION OF STEROIDOGENIC TRANSCRIPTS AND ESTRADIOL PRODUCTION FOLLOWING IN VITRO PIG EMBRYO ELONGATION IN ALGINATE HYDROGEL THREE-DIMENSIONAL MATRIX

2012 ◽  
Vol 24 (1) ◽  
pp. 162
Author(s):  
J. R. Miles ◽  
C. N. Sargus ◽  
S. A. Plautz ◽  
J. L. Vallet ◽  
A. K. Pannier
Keyword(s):  
Equal Opportunity ◽  
Culture Media ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Differential Gene Regulation ◽  
Alginate Hydrogels ◽  
The Media ◽  
And Control

Between Day 10 and 12 of gestation, the pig embryo elongates from a sphere to a long thin, filament. During this time, the embryo increases the production of oestrogen via an increase in steroidogenic transcripts, which is critical for maternal recognition of pregnancy. To date, attempts to elongate porcine embryos in vitro have been unsuccessful. Therefore, the objective of this study was to utilise alginate hydrogels to establish a culture system that promotes in vitro embryo elongation with a corresponding increase in steroidogenic transcripts and oestradiol production. In 3 replicate collections, White crossbred gilts (n = 15) were bred at Day 0 of the oestrous cycle. At Day 9 of gestation, reproductive tracts were collected and flushed with RPMI-1640 containing antibiotics. Embryos were recovered, grouped according to size and washed with RPMI-1640 containing antibiotics and 10% fetal bovine serum (FBS). Embryos were randomly assigned to be encapsulated using a double encapsulation technique (0.7% sodium alginate and 1.5% calcium chloride solution) or used as controls. Encapsulated and control embryos were cultured for 96 h in CO2 -pretreated RPMI-1640 containing antibiotics and 10% FBS at 38°C, 5% CO2 in air and 100% humidity. Every 24 h, the embryos were imaged and half of the media was replaced. The removed media was stored at –20°C and used to assess oestradiol levels by radioimmunoassay. At the end of culture, a subset of encapsulated and control embryos were snap frozen and used to assess the expression level of steroidogenic transcripts (STAR, CYP11 and CYP19) using quantitative PCR. All data were analysed using general linear model (GLM) procedures for ANOVA. Cell survival, assessed by blastocyst fragmentation and confirmed by live/dead staining in representative embryos, was greater (P = 0.01) for encapsulated embryos (60.1 ± 4.8%) compared with controls (33.3 ± 4.8%). Of encapsulated embryos, 27% had some morphological change (minor flattening and tubal formation) and 14% had significant morphological changes (considerable flattening and tubal formation elongating through the gel), consistent with in vivo embryo elongation. In contrast, the control embryos had no morphological changes observed and remained spherical during culture. The expression levels of STAR, CYP11 and CYP19 were significantly (P < 0.05) greater in encapsulated embryos compared with control embryos. Furthermore, a significant (P < 0.01) time-dependent increase in oestradiol levels in the culture media of encapsulated embryos was identified compared with controls and culture media alone. These results illustrate that cultured pig embryos encapsulated in alginate hydrogels undergo limited morphological changes with increased expression of steroidogenic transcripts and oestrogen production. †USDA is an equal opportunity provider and employer.

scholarly journals Multifunctionalized hydrogels foster hNSC maturation in 3D cultures and neural regeneration in spinal cord injuries

2019 ◽  
Vol 116 (15) ◽  
pp. 7483-7492 ◽  
Author(s):  
Amanda Marchini ◽  
Andrea Raspa ◽  
Raffaele Pugliese ◽  
Marina Abd El Malek ◽  
Valentina Pastori ◽  
...  
Keyword(s):  
Spinal Cord ◽  
Spinal Cord Injuries ◽  
Culture Media ◽  
Three Dimensional ◽  
Cholinergic Neurons ◽  
Good Manufacturing Practice ◽  
Neural Regeneration ◽  
Neuronal Markers

Three-dimensional cell cultures are leading the way to the fabrication of tissue-like constructs useful to developmental biology and pharmaceutical screenings. However, their reproducibility and translational potential have been limited by biomaterial and culture media compositions, as well as cellular sources. We developed a construct comprising synthetic multifunctionalized hydrogels, serum-free media, and densely seeded good manufacturing practice protocol-grade human neural stem cells (hNSC). We tracked hNSC proliferation, differentiation, and maturation into GABAergic, glutamatergic, and cholinergic neurons, showing entangled electrically active neural networks. The neuroregenerative potential of the “engineered tissue” was assessed in spinal cord injuries, where hNSC-derived progenitors and predifferentiated hNSC progeny, embedded in multifunctionalized hydrogels, were implanted. All implants decreased astrogliosis and lowered the immune response, but scaffolds with predifferentiated hNSCs showed higher percentages of neuronal markers, better hNSC engraftment, and improved behavioral recovery. Our hNSC-construct enables the formation of 3D functional neuronal networks in vitro, allowing novel strategies for hNSC therapies in vivo.

scholarly journals Improving the metabolic fidelity of cancer models with a physiological cell culture medium

2019 ◽  
Vol 5 (1) ◽  
pp. eaau7314 ◽  
Author(s):  
Johan Vande Voorde ◽  
Tobias Ackermann ◽  
Nadja Pfetzer ◽  
David Sumpton ◽  
Gillian Mackay ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cancer Cells ◽  
Culture Media ◽  
Hypoxia Inducible Factor ◽  
Commercial Media ◽  
Physiological Medium ◽  
Cancer Models ◽  
Cancer Spheroids

Currently available cell culture media may not reproduce the in vivo metabolic environment of tumors. To demonstrate this, we compared the effects of a new physiological medium, Plasmax, with commercial media. We prove that the disproportionate nutrient composition of commercial media imposes metabolic artifacts on cancer cells. Their supraphysiological concentrations of pyruvate stabilize hypoxia-inducible factor 1α in normoxia, thereby inducing a pseudohypoxic transcriptional program. In addition, their arginine concentrations reverse the urea cycle reaction catalyzed by argininosuccinate lyase, an effect not observed in vivo, and prevented by Plasmax in vitro. The capacity of cancer cells to form colonies in commercial media was impaired by lipid peroxidation and ferroptosis and was rescued by selenium present in Plasmax. Last, an untargeted metabolic comparison revealed that breast cancer spheroids grown in Plasmax approximate the metabolic profile of mammary tumors better. In conclusion, a physiological medium improves the metabolic fidelity and biological relevance of in vitro cancer models.

scholarly journals A reliable and affordable 3D tumor spheroid model for natural product drug discovery: A case study of curcumin

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Loh Teng Hern Tan ◽  
Liang Ee Low ◽  
Siah Ying Tang ◽  
Wei Hsum Yap ◽  
Lay Hong Chuah ◽  
...  
Keyword(s):  
Cell Culture ◽  
Drug Discovery ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Automated Image Analysis ◽  
Tumor Spheroids ◽  
Culture Methods ◽  
In Vivo Models

Three-dimensional cell culture methods revolutionize the field of anticancer drug discovery, forming an important link-bridge between conventional in vitro and in vivo models and conferring significant clinical and biological relevant data. The current work presents an affordable yet reproducible method of generating homogenous 3D tumor spheroids. Also, a new open source software is adapted to perform an automated image analysis of 3D tumor spheroids and subsequently generate a list of morphological parameters of which could be utilized to determine the response of these spheroids toward treatments. Our data showed that this work could serve as a reliable 3D cell culture platform for preclinical cytotoxicity testing of natural products prior to the expensive and time-consuming animal models

Application of Three-dimensional (3D) Tumor Cell Culture Systems and Mechanism of Drug Resistance

2019 ◽  
Vol 25 (34) ◽  
pp. 3599-3607 ◽  
Author(s):  
Adeeb Shehzad ◽  
Vijaya Ravinayagam ◽  
Hamad AlRumaih ◽  
Meneerah Aljafary ◽  
Dana Almohazey ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cancer Cells ◽  
Anticancer Drugs ◽  
Three Dimensional ◽  
3D Culture ◽  
3D Cell Culture ◽  
Cancer Therapeutics ◽  
In Vivo Model

: The in-vitro experimental model for the development of cancer therapeutics has always been challenging. Recently, the scientific revolution has improved cell culturing techniques by applying three dimensional (3D) culture system, which provides a similar physiologically relevant in-vivo model for studying various diseases including cancer. In particular, cancer cells exhibiting in-vivo behavior in a model of 3D cell culture is a more accurate cell culture model to test the effectiveness of anticancer drugs or characterization of cancer cells in comparison with two dimensional (2D) monolayer. This study underpins various factors that cause resistance to anticancer drugs in forms of spheroids in 3D in-vitro cell culture and also outlines key challenges and possible solutions for the future development of these systems.

scholarly journals Morphological Changes in Astrocytes by Self-Oxidation of Dopamine to Polydopamine and Quantification of Dopamine through Multivariate Regression Analysis of Polydopamine Images

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2483
Author(s):  
Anik Karan ◽  
Elnaz Khezerlou ◽  
Farnaz Rezaei ◽  
Leon Iasemidis ◽  
Mark A. DeCoster
Keyword(s):  
Cell Culture ◽  
Regression Analysis ◽  
Multivariate Regression ◽  
Culture Media ◽  
Morphological Changes ◽  
Multivariate Regression Analysis ◽  
Cell Number ◽  
Polymerization Process

Astrocytes, also known as astroglia, are important cells for the structural support of neurons as well as for biochemical balance in the central nervous system (CNS). In this study, the polymerization of dopamine (DA) to polydopamine (PDA) and its effect on astrocytes was investigated. The polymerization of DA, being directly proportional to the DA concentration, raises the prospect of detecting DA concentration from PDA optically using image-processing techniques. It was found here that DA, a naturally occurring neurotransmitter, significantly altered astrocyte cell number, morphology, and metabolism, compared to astrocytes in the absence of DA. Along with these effects on astrocytes, the polymerization of DA to PDA was tracked optically in the same cell culture wells. This polymerization process led to a unique methodology based on multivariate regression analysis that quantified the concentration of DA from optical images of astrocyte cell culture media. Therefore, this developed methodology, combined with conventional imaging equipment, could be used in place of high-end and expensive analytical chemistry instruments, such as spectrophotometry, mass spectrometry, and fluorescence techniques, for quantification of the concentration of DA after polymerization to PDA under in vitro and potentially in vivo conditions.

Sign in / Sign up

Export Citation Format

Share Document