Kinematic and dynamic analysis of compliant mechanisms considering both lateral and axial deformations of flexural beams

2018 ◽  
Vol 233 (3) ◽  
pp. 1007-1020 ◽  
Author(s):  
Yue-Qing Yu ◽  
Peng Zhou ◽  
Qi-Ping Xu
Keyword(s):  
Rigid Body ◽  
Dynamic Analysis ◽  
Dynamic Model ◽  
Compliant Mechanisms ◽  
Dynamic Responses ◽  
Flexible Beams ◽  
Rigid Body Dynamic ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Dynamic

The kinematic and dynamic analysis of compliant mechanisms is investigated comprehensively in this work. Based on the pseudo-rigid-body model, a new PR model is proposed to simulate both the lateral and axial deformations of flexural beams in compliant mechanisms. An optimization for the characteristic factors and a linear regression for the stiffness coefficients of PR pseudo-rigid-body model are presented. Compared with the 1R and 2R pseudo-rigid-body model, the advantage of the PR model is well illustrated. The dynamic modeling of flexible beams in compliant mechanisms is then developed based on the PR pseudo-rigid-body model. The dynamic equation of a PR pseudo-rigid-body dynamic model is derived and the dynamic responses are then presented. The kinematic and dynamic analysis of a compliant slider-crank mechanism is presented by the 1R, 2R and PR model, respectively. The effectiveness of pseudo-rigid-body models and the superiorities of the PR pseudo-rigid-body model and PR pseudo-rigid-body dynamic model are shown clearly in the numerical example.

Pseudo-rigid-body dynamic modeling and analysis of compliant mechanisms

2017 ◽  
Vol 232 (9) ◽  
pp. 1665-1678 ◽  
Author(s):  
Yue-Qing Yu ◽  
Qian Li ◽  
Qi-Ping Xu
Keyword(s):  
Rigid Body ◽  
Dynamic Model ◽  
Dynamic Modeling ◽  
Dynamic Models ◽  
Compliant Mechanisms ◽  
Lagrange Equation ◽  
Dynamic Responses ◽  
Modeling And Analysis ◽  
Rigid Body Dynamic ◽  
Body Dynamic

An intensive study on the dynamic modeling and analysis of compliant mechanisms is presented in this paper based on the pseudo-rigid-body model. The pseudo-rigid-body dynamic model with single degree-of-freedom is proposed at first and the dynamic equation of the 1R pseudo-rigid-body dynamic model for a flexural beam is presented briefly. The pseudo-rigid-body dynamic models with multi-degrees-of-freedom are then derived in detail. The dynamic equations of the 2R pseudo-rigid-body dynamic model and 3R pseudo-rigid-body dynamic model for the flexural beams are obtained using Lagrange equation. Numerical investigations on the natural frequencies and dynamic responses of the three pseudo-rigid-body dynamic models are made. The effectiveness and superiority of the pseudo-rigid-body dynamic model has been shown by comparing with the finite element analysis method. An example of a compliant parallel-guiding mechanism is presented to investigate the dynamic behavior of the mechanism using the 2R pseudo-rigid-body dynamic model.

scholarly journals Accuracy Assessment of Pseudo-Rigid-Body Model for Dynamic Analysis of Compliant Mechanisms

2017 ◽  
Vol 9 (5) ◽  
Author(s):  
Na Li ◽  
Hai-Jun Su ◽  
Xian-Peng Zhang
Keyword(s):  
Rigid Body ◽  
Dynamic Analysis ◽  
Distribution Coefficient ◽  
Mass Distribution ◽  
High Speed ◽  
Compliant Mechanisms ◽  
Accuracy Assessment ◽  
Dynamic Responses ◽  
Dynamic Simulations ◽  
Rigid Body Model

Dynamic characteristics analysis is very important for the design and application of compliant mechanisms, especially for dynamic and control performance in high-speed applications. Although pseudo-rigid-body (PRB) models have been extensively studied for kinetostatic analysis, their accuracy for dynamic analysis is relatively less evaluated. In this paper, we first evaluate the accuracy of the PRB model by comparing against the continuum model using dynamic simulations. We then investigate the effect of mass distribution on dynamics of PRB model for compliant parallel-guided mechanisms. We show that when the beam mass is larger than 10% of the motion stage, the error is significant. We then propose a new PRB model with a corrected mass distribution coefficient which significantly reduces the error of the PRB model. And the dynamic responses are also analyzed according to the corrected mass distribution coefficient. At last, a compliant double parallel-guiding mechanism is used as a case study for validation of the new PRB model for dynamics of compliant mechanisms.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

A Simple and Accurate Method for Determining Large Deflections in Complaint Mechanisms Subjected to End Forces and Moments

1998 ◽  
Author(s):  
A. Saxena ◽  
Steven N. Kramer
Keyword(s):  
Rigid Body ◽  
Numerical Integration ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Beam Equation ◽  
Integration Scheme ◽  
Large Deflections ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads for which, traditional methods of deflection analysis do not apply Nonlinearities introduced by these large deflections make the system comprising such members difficult to solve Parametric deflection approximations are then deemed helpful in the analysis and synthesis of compliant mechanisms This is accomplished by seeking the pseudo-rigid-body model representation of the compliant mechanism A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads with positive end moments A numerical integration technique using quadrature formulae has been employed to solve the nonlinear Bernoulli-Euler beam equation for the tip deflection Implementation of this scheme is relatively simpler than the elliptic integral formulation and provides nearly accurate results Results of the numerical integration scheme are compared with the beam finite element analysis An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

Parametric Deflection Approximations for Initially Curved, Large-Deflection Beams in Compliant Mechanisms

1996 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Curved Beam ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Fundamental Type ◽  
Applied Forces ◽  
Flexible Member

Abstract The analysis of systems containing highly flexible members is made difficult by the nonlineararities caused by large deflections of the flexible members. The analysis and design of many such systems may be simplified by using pseudo-rigid-body approximations in modeling the flexible members. The pseudo-rigid-body model represents flexible members as rigid links, joined at pin joints with torsional springs. Appropriate values for link lengths and torsional spring stiffnesses are determined such that the deflection path and force-deflection relationships are modeled accurately. Pseudo-rigid-body approximations have been developed for initially straight beams with externally applied forces at the beam end. This work develops approximations for another fundamental type of flexible member, the initially curved beam with applied force at the beam end. This type of flexible member is commonly used in compliant mechanisms. An example of the use of the resulting pseudo-rigid-body approximations in compliant mechanisms is included.

Compliant Pantographs via the Pseudo-Rigid-Body Model

1998 ◽  
Author(s):  
Andrew J. Nielson ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Test Results ◽  
Rigid Link ◽  
Body Model ◽  
Design Flexibility ◽  
Model Predictions ◽  
Rigid Body Model ◽  
Classical Mechanism

Abstract This paper uses a familiar classical mechanism, the pantograph, to demonstrate the utility of the pseudo-rigid-body model in the design of compliant mechanisms to replace rigid-link mechanisms, and to illustrate the advantages and limitations of the resulting compliant mechanisms. To demonstrate the increase in design flexibility, three different compliant mechanism configurations were developed for a single corresponding rigid-link mechanism. The rigid-link pantograph consisted of six links and seven joints, while the corresponding compliant mechanisms had no more than two links and three joints (a reduction of at least four links and four joints). A fourth compliant pantograph, corresponding to a rhomboid pantograph, was also designed and tested. The test results showed that the pseudo-rigid-body model predictions were accurate over a large range, and the mechanisms had displacement characteristics of rigid-link mechanisms in that range. The limitations of the compliant mechanisms included reduced range compared to their rigid-link counterparts. Also, the force-deflection characteristics were predicted by the pseudo-rigid-body model, but they did not resemble those for a rigid-link pantograph because of the energy storage in the flexible segments.

Dynamic Characteristics of Planar Compliant Parallel-Guiding Mechanisms

2008 ◽  
Author(s):  
Wenjing Wang ◽  
Yueqing Yu
Keyword(s):  
Numerical Methods ◽  
Rigid Body ◽  
Natural Frequency ◽  
Dynamic Modeling ◽  
Dynamic Characteristics ◽  
Compliant Mechanisms ◽  
Design Parameters ◽  
Dynamic Effects ◽  
Body Model ◽  
Rigid Body Model

Dynamic effects are very important to improving the design of compliant mechanisms. An investigation on the dynamic characteristics of planar compliant parallel-guiding mechanism is presented. Based on the pseudo-rigid-body model, the dynamic model of planar compliant parallel-guiding mechanisms is developed using the numerical methods at first. The natural frequency is then calculated, and frequency characteristics of this mechanism are studied. The numerical results show the accuracy of the proposed method for dynamic modeling of compliant mechanisms, and the relationships between the natural frequency and design parameters are analyzed clearly.

Classification of Compliant Mechanisms and Determination of the Degrees of Freedom Using the Concepts of Compliance Number and Pseudo-Rigid-Body Model

2019 ◽  
Author(s):  
Pratheek Bagivalu Prasanna ◽  
Ashok Midha ◽  
Sushrut G. Bapat
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Body Model ◽  
Active Compliance ◽  
Kinematic Behavior ◽  
Rigid Body Model

Abstract Understanding the kinematic properties of a compliant mechanism has always proved to be a challenge. A concept of compliance number offered earlier emphasized the development of terminology that aided in its determination. A method to evaluate the elastic degrees of freedom associated with the flexible segments/links of a compliant mechanism using the pseudo-rigid-body model (PRBM) concept is provided. In this process, two distinct classes of compliant mechanisms are developed involving: (i) Active Compliance and (ii) Passive Compliance. Furthermore, these also aid in a better characterization of the kinematic behavior of a compliant mechanism. A more lucid interpretation of the significance of compliance number is provided. Applications of this method to both active and passive compliant mechanisms are exemplified. Finally, an experimental procedure that aids in visualizing the degrees of freedom as calculated is presented.

Sign in / Sign up

Export Citation Format

Share Document