Trajectory optimization of unmanned aerial vehicle in dynamic soaring

Author(s):  
Bing-Jie Zhu ◽  
Zhong-Xi Hou ◽  
Hua-Jiang Ouyang

An aircraft can extract energy from a gradient wind field by dynamic soaring. The paper presents trajectory optimization of an unmanned aerial vehicle for dynamic soaring by numerical analysis and validates the theoretical work through flight test. The collocation approach is used to convert the trajectory optimization problem into parameters optimization. The control and state parameters include lift coefficient, bank angle, positions, flight path angle, heading angle, and airspeed, which are obtained from the parameter optimization software. To validate the results of numerical simulation, the dynamic soaring experiment is also performed and experimental data are analyzed. This research work shows that the unmanned aerial vehicle can gain enough flight energy from the gradient wind field by following an optimal dynamic soaring trajectory. Meanwhile, the variation of flight path angle, heading angle, and airspeed has a significant influence on the energy transform. The solution can provide theoretical guide to unmanned aerial vehicles for extracting maximum energy from gradient wind fields.

Author(s):  
Duo-Neng Liu ◽  
Zhong-Xi Hou ◽  
Zheng Guo ◽  
Xi-Xiang Yang ◽  
Xian-Zhong Gao

Like albatross, unmanned aerial vehicles can significantly make use of wind gradient to extract energy by the flight technique named dynamic soaring. The research aims to develop a general optimization method to compute all the possible patterns of dynamic soaring with a small unmanned aerial vehicle. A direct collocation approach based on the Runge-Kutta integrator is proposed to solve the trajectory optimization problem for dynamic soaring. The optimal dynamic soaring trajectories are classified into two patterns: closed trajectory pattern and travelling trajectory pattern by applying terminal constraints of zero horizontal displacement and a certain travelling direction, respectively. Using different terminal constrains for heading angle and initial guesses in the optimization process, the former pattern can be divided into two subtypes: O-shaped and 8-shaped trajectories, while the latter one is divided into C-shaped, α-shaped, S-shaped and Ω-shaped trajectories. The characteristics of these patterns and the correlation among patterns are analyzed and discussed.


2019 ◽  
Vol 9 (18) ◽  
pp. 3708 ◽  
Author(s):  
Liguo Tan ◽  
Juncheng Wu ◽  
Xiaoyan Yang ◽  
Senmin Song

The location, velocity, and flight path angle of an autonomous unmanned aerial vehicle (UAV) landing on a moving vessel are key factors for an optimal landing trajectory. To tackle this challenge, this paper proposes a method for calculating the optimal approach landing trajectory between an UAV and a small vessel. A numerical approach (iterative method) is used to calculate the optimal approach landing trajectory, and the initial lead is introduced in the calculation process of the UAV trajectory for the inclination and heading angle for accuracy improvement, so that the UAV can track and calculate the optimal landing trajectory with high precision. Compared with the variational method, the proposed method can calculate an optimal turning direction angle for the UAV during the landing. Simulation experiments verify the effectiveness of the proposed algorithm and give optimal initialization values.


2020 ◽  
Vol 51 (7-9) ◽  
pp. 158-163
Author(s):  
Huiru Cao ◽  
Haixiu Cheng ◽  
Wenjian Zhu

Wind field and sound field characteristics are the key indexes for unmanned aerial vehicle. Therefore, in this study, the wind field and sound field characteristics of a quad-rotor unmanned aerial vehicle are investigated. First, the experimental platform was set up based on quad-rotor unmanned aerial vehicle. Second, the experiments were performed on the wind field and the sound field characteristics of the unmanned aerial vehicle at different working currents. Then, the experiment results were analysed. Meanwhile, the experimental results showed that the working current has a large impact on the wind field and the wind intensity increases as working current increases; as the working current increases, the sound field is enhanced and a linear relationship exists; within a certain distance range of the unmanned aerial vehicle, as distance increases, sound intensity dramatically decreases. The presented methods and results can not only be used to evaluate the performance of the electric multi-rotor unmanned aerial vehicle but also provide references for the further improvement of the performance of the unmanned aerial vehicle.


2009 ◽  
Vol 32 (5) ◽  
pp. 1446-1457 ◽  
Author(s):  
Markus Deittert ◽  
Arthur Richards ◽  
C. A. Toomer ◽  
Anthony Pipe

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Lin Xiao ◽  
Yipeng Liang ◽  
Chenfan Weng ◽  
Dingcheng Yang ◽  
Qingmin Zhao

In this paper, we consider a ground terminal (GT) to an unmanned aerial vehicle (UAV) wireless communication system where data from GTs are collected by an unmanned aerial vehicle. We propose to use the ground terminal-UAV (G-U) region for the energy consumption model. In particular, to fulfill the data collection task with a minimum energy both of the GTs and UAV, an algorithm that combines optimal trajectory design and resource allocation scheme is proposed which is supposed to solve the optimization problem approximately. We initialize the UAV’s trajectory firstly. Then, the optimal UAV trajectory and GT’s resource allocation are obtained by using the successive convex optimization and Lagrange duality. Moreover, we come up with an efficient algorithm aimed to find an approximate solution by jointly optimizing trajectory and resource allocation. Numerical results show that the proposed solution is efficient. Compared with the benchmark scheme which did not adopt optimizing trajectory, the solution we propose engenders significant performance in energy efficiency.


2021 ◽  
Vol 2 (2) ◽  
pp. 121-131
Author(s):  
Jennifer S. Raj

In this research work and unmanned aerial vehicle (UAV) that uses blockchain methodology to collect health data from the users and saves it on a server nearby is introduced. In this paper the UAV communicates with the body sensor hives (BSH) through a low-power secure manner. This process is established using a token with which the UAV establishes relationship with the BSH. The UAV decrypts the retrieved HD with the help of of the shared key, creating a two-phase authentication mechanism. When verified, the HT is transmitted to a server nearby in a safe manner using blockchain. The proposed healthcare methodology is analysed to determine its feasibility. Simulation and implementation is executed and a performance of the work is observed. Analysis indicates that the proposed work provides good assistance in a secure environment.


2017 ◽  
Vol 3 (9) ◽  
pp. 1009-1015
Author(s):  
Vasyl Myklukha ◽  
◽  
Nataliia Khimchyk ◽  

Sign in / Sign up

Export Citation Format

Share Document