On Direct Methods for Constructing Nonlinear Normal Modes of Continuous Systems

1995 ◽  
Vol 1 (4) ◽  
pp. 389-430 ◽  
Author(s):  
Ali H. Nayfeh

A direct method based on the method of normal forms is proposed for constructing the nonlinear normal modes of continuous systems. The proposed method is compared with the method of multiple scales and the methods of Shaw and Pierre and King and Vakakis by applying them to three conservative systems with cubic nonlinearities: (a) a hinged-hinged beam resting on a nonlinear elastic foundation, (b) a model of a relief valve (linear elastic spring attached to a nonlinear spring with a mass), and (c) a simply supported linear beam with nonlinear torsional springs at both ends. In the absence of internal resonance, the constructed nonlinear modes with all four methods are the same. The method of multiple scales seems to be the simplest and the least computationally demanding. The methods of multiple scales and normal forms are applicable to problems with and without internal resonances, whereas the present forms of the methods of Shaw and Pierre and King and Vakakis are not applicable to problems with internal resonances.

1995 ◽  
Vol 117 (2) ◽  
pp. 199-205 ◽  
Author(s):  
A. H. Nayfeh ◽  
S. A. Nayfeh

We use two approaches to determine the nonlinear modes and natural frequencies of a simply supported Euler-Bernoulli beam resting on an elastic foundation with distributed quadratic and cubic nonlinearities. In the first approach, we use the method of multiple scales to treat the governing partial-differential equation and boundary conditions directly. In the second approach, we use a Galerkin procedure to discretize the system and then determine the normal modes from the discretized equations by using the method of multiple scales and the invariant manifold approach. Whereas one- and two-mode discretizations produce erroneous results for continuous systems with quadratic and cubic nonlinearities, all methods, in the present case, produce the same results because the discretization is carried out by using a complete set of basis functions that satisfy the boundary conditions.


Author(s):  
Ali H. Nayfeh ◽  
Walter Lacarbonara ◽  
Char-Ming Chin

Abstract Nonlinear normal modes of a buckled beam about its first buckling mode shape are investigated. Fixed-fixed boundary conditions are considered. The cases of three-to-one and one-to-one internal resonances are analyzed. Approximate expressions for the nonlinear normal modes are obtained by applying the method of multiple scales to the governing integro-partial-differential equation and boundary conditions. Curves displaying variation of the amplitude with the internal resonance detuning parameter are generated. It is shown that, for a three-to-one internal resonance between the first and third modes, the beam may possess either one stable mode, or three stable normal modes, or two stable and one unstable normal modes. On the other hand, for a one-to-one internal resonance between the first and second modes, two nonlinear normal modes exist. The two nonlinear modes are either neutrally stable or unstable. In the case of one-to-one resonance between the third and fourth modes, two neutrally stable, nonlinear normal modes exist.


Author(s):  
Yohta Kunitoh ◽  
Hiroshi Yabuno ◽  
Tsuyoshi Inoue ◽  
Yukio Ishida

Mode localizations in a weakly coupled two-span rotor system are theoretically and experimentally discussed. One rotor has a slight unbalance and the other one is well-assembled. First, the equations governing the whirling motions of the coupled rotors are expressed due to nonlinearity in each span and the weakness of the coupling. The averaged equations are obtained by the method of multiple scales and it is shown that the nonlinear normal modes are bifurcated from the linear normal modes. It results from this bifurcation that the number of nonlinear normal modes exceeds the equivalent degree of freedom of the two-span rotor system, i.e., 2-degree under the assumption that the trajectory of the whirling motion is circle. Also, it is theoretically clarified that whirling motion caused by the unbalance in the rotor is localized in the rotor with unbalance or in one without unbalance depending on the rotational speed. Furthermore, these mode localizations are experimentally confirmed.


Author(s):  
G. Rega ◽  
N. Srinil ◽  
S. Chucheepsakul

Internally resonant dynamics in the nonlinear free vibrations of suspended cables are analytically investigated by means of a multi-mode Galerkin-based discretization and second-order multiple scales. Emphasis is placed on planar 2:1 internal resonances. The equations of motion of a general inclined cable model, which account for the dynamic extensibility effects and the system asymmetry due to inclined equilibrium, are considered. By considering higher-order effects due to quadratic nonlinearities, approximate closed-form solutions of nonlinear amplitudes, frequencies and dynamic configurations associated with the resonant nonlinear normal modes reveal the dependence of cable nonlinear response on different resonant and non-resonant modes. Based on the modal convergence properties performed on the resonantly activated cables, the illustrative results provide hints for proper reduced-order model selections from the asymptotic solution. The underlying effects of cable inclination and cable sag are presented. The theoretical predictions are validated by finite difference numerical time laws of the original system equations of motion.


1996 ◽  
Vol 63 (3) ◽  
pp. 810-819 ◽  
Author(s):  
M. E. King ◽  
A. F. Vakakis

A formulation for computing resonant nonlinear normal modes (NNMs) is developed for discrete and continuous systems. In a canonical framework, internal resonance conditions are immediately recognized by identifying commensurable linearized natural frequencies of these systems. Additionally, a canonical formulation allows for a single (linearized modal) coordinate to parameterize all other coordinates during a resonant NNM response. Energy-based NNM methodologies are applied to a canonical set of equations and asymptotic solutions are sought. In order to account for the resonant modal interactions, it will be shown that high-order terms in the O(1) solutions must be considered (in the absence of internal resonances, a linear expansion at O(1) is sufficient). Two applications (‘3:1’ resonances in a two-degree-of-freedom system and ‘3:1’ resonance in a hinged-clamped beam) are then considered by which to demonstrate the resonant NNM methodology. It is shown that for some responses, nonlinear modal relations do not exist in the context of physical coordinates and thus a transformation to a canonical framework is necessary in order to appropriately define NNM relations.


Author(s):  
Melvin E. King ◽  
Alexander F. Vakakis

Abstract In this work, modifications to existing energy-based nonlinear normal mode (NNM) methodologies are developed in order to investigate internal resonances. A formulation for computing resonant NNMs is developed for discrete, or discretized for continuous systems, sets of weakly nonlinear equations with uncoupled linear terms (i.e systems in modal, or canonical, form). By considering a canonical framework, internal resonance conditions are immediately recognized by identifying commensurable linearized natural frequencies. Additionally, the canonical formulation allows for a single (linearized modal) coordinate to parameterize all other (modal) coordinates during a resonant modal response. Energy-based NNM methodologies are then applied to the canonical equations and asymptotic solutions are sought. In order to account for the resonant modal interactions, it will be shown that high-order terms in the O(1) solutions must be considered. Two applications (‘3:1’ resonances in a two-degree-of-freedom system and ‘3:1’ resonance in a hinged-clamped beam) are then considered by which to demonstrate the application of the resonant NNM methodology. Resonant normal mode solutions are obtained and the stability characteristics of these computed modes are considered. It is shown that for some responses, nonlinear modal relations do not exist in the context of physical coordinates and thus the transformation to canonical coordinates is necessary in order to define appropriate NNM relations.


Author(s):  
Alexander F. Vakakis ◽  
Richard H. Rand

We study the resonant dynamics of a two-degree-of-freedom system composed a linear oscillator weakly coupled to a strongly nonlinear one, with an essential (nonlinearizable) cubic stiffness nonlinearity. For the undamped system this leads to a series of internal resonances, depending on the level of (conserved) total energy of oscillation. We study in detail the 1:1 internal resonance, and show that the undamped system possesses stable and unstable synchronous periodic motions (nonlinear normal modes — NNMs), as well as, asynchronous periodic motions (elliptic orbits — EOs). Furthermore, we show that when damping is introduced certain NNMs produce resonance capture phenomena, where a trajectory of the damped dynamics gets ‘captured’ in the neighborhood of a damped NNM before ‘escaping’ and becoming an oscillation with exponentially decaying amplitude. In turn, these resonance captures may lead to passive nonlinear energy pumping phenomena from the linear to the nonlinear oscillator. Thus, sustained resonance capture appears to provide a dynamical mechanism for passively transferring energy from one part of the system to another, in a one-way, irreversible fashion. Numerical integrations confirm the analytical predictions.


Author(s):  
Simon A. Neild ◽  
Alan R. Champneys ◽  
David J. Wagg ◽  
Thomas L. Hill ◽  
Andrea Cammarano

A historical introduction is given of the theory of normal forms for simplifying nonlinear dynamical systems close to resonances or bifurcation points. The specific focus is on mechanical vibration problems, described by finite degree-of-freedom second-order-in-time differential equations. A recent variant of the normal form method, that respects the specific structure of such models, is recalled. It is shown how this method can be placed within the context of the general theory of normal forms provided the damping and forcing terms are treated as unfolding parameters. The approach is contrasted to the alternative theory of nonlinear normal modes (NNMs) which is argued to be problematic in the presence of damping. The efficacy of the normal form method is illustrated on a model of the vibration of a taut cable, which is geometrically nonlinear. It is shown how the method is able to accurately predict NNM shapes and their bifurcations.


Sign in / Sign up

Export Citation Format

Share Document