scholarly journals ISEE: Industrial Internet of Things perception in solar cell detection based on edge computing

2021 ◽  
Vol 17 (11) ◽  
pp. 155014772110505
Author(s):  
Meiya Dong ◽  
Jumin Zhao ◽  
Deng-ao Li ◽  
Biaokai Zhu ◽  
Sihai An ◽  
...  
Keyword(s):  
Neural Network ◽  
Power Generation ◽  
Internet Of Things ◽  
Real Time ◽  
Edge Computing ◽  
Theoretical Research ◽  
Processing Unit ◽  
Computing Unit ◽  
Photovoltaic Power ◽  
Industrial Internet

The photovoltaic industry is a strategic and sunrise industry with international competitive advantages. Driven by policy guidance and market demand, the new energy industry represented by the photovoltaic industry has been a significant emerging industry in developing the national economy and people’s livelihood. Stable photovoltaic power generation capacity supply is a critical issue in the photovoltaic industry. With the popularization of industrial Internet technology and Internet of things technology, more and more academic and industrial circles begin to introduce new technologies to provide the latest research results and solutions for the photovoltaic industry. Electroluminescence is a standard detection method for photovoltaic production in the application of solar energy production. This method uses human vision to detect whether the solar silicon unit is defective. In this article, due to the three core pain points in traditional electroluminescence detection: low efficiency of offline identification, low accuracy and accuracy of data detection, and no online diagnosis and prediction, we carry out ISEE research based on edge computing unit. ISEE uses the edge device to collect the real-time video image of the solar panel through the camera. Then it uses the powerful neural network processing unit module of the edge computing unit, combined with the convolutional neural network algorithm transplanted to the edge, to detect the defects of solar panels in real time. It completes the research on intelligent detection of photovoltaic power generation production defects based on the Internet of Things. After a large number of experimental design verification, ISEE effectively improves the automation degree and identification accuracy in the production and detection process of solar photovoltaic cells and reduces the cost of operation and maintenance. The accuracy rate reaches 93.75%, which has significant theoretical research significance and practical application value.

Real-time Detection of Aortic Valve in Echocardiography using Convolutional Neural Networks

2020 ◽  
Vol 16 (5) ◽  
pp. 584-591 ◽  
Author(s):  
Muhammad Hanif Ahmad Nizar ◽  
Chow Khuen Chan ◽  
Azira Khalil ◽  
Ahmad Khairuddin Mohamed Yusof ◽  
Khin Wee Lai
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Heart Disease ◽  
Aortic Valve ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Valvular Heart Disease ◽  
Detection System ◽  
Processing Unit ◽  
Real Time Detection

Background: Valvular heart disease is a serious disease leading to mortality and increasing medical care cost. The aortic valve is the most common valve affected by this disease. Doctors rely on echocardiogram for diagnosing and evaluating valvular heart disease. However, the images from echocardiogram are poor in comparison to Computerized Tomography and Magnetic Resonance Imaging scan. This study proposes the development of Convolutional Neural Networks (CNN) that can function optimally during a live echocardiographic examination for detection of the aortic valve. An automated detection system in an echocardiogram will improve the accuracy of medical diagnosis and can provide further medical analysis from the resulting detection. Methods: Two detection architectures, Single Shot Multibox Detector (SSD) and Faster Regional based Convolutional Neural Network (R-CNN) with various feature extractors were trained on echocardiography images from 33 patients. Thereafter, the models were tested on 10 echocardiography videos. Results: Faster R-CNN Inception v2 had shown the highest accuracy (98.6%) followed closely by SSD Mobilenet v2. In terms of speed, SSD Mobilenet v2 resulted in a loss of 46.81% in framesper- second (fps) during real-time detection but managed to perform better than the other neural network models. Additionally, SSD Mobilenet v2 used the least amount of Graphic Processing Unit (GPU) but the Central Processing Unit (CPU) usage was relatively similar throughout all models. Conclusion: Our findings provide a foundation for implementing a convolutional detection system to echocardiography for medical purposes.

scholarly journals Editorial: Special Section on Pervasive Edge Computing for Industrial Internet of Things

2021 ◽  
Vol 17 (7) ◽  
pp. 5010-5011
Author(s):  
Zhaolong Ning ◽  
Edith Ngai ◽  
Ricky Y. K. Kwok ◽  
Mohammad S. Obaidat
Keyword(s):  
Internet Of Things ◽  
Special Section ◽  
Edge Computing ◽  
Industrial Internet Of Things ◽  
Industrial Internet

scholarly journals Software Architecture of a Fog Computing Node for Industrial Internet of Things

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3715
Author(s):  
Ioan Ungurean ◽  
Nicoleta Cristina Gaitan
Keyword(s):  
Internet Of Things ◽  
Real Time ◽  
Development Process ◽  
Fog Computing ◽  
Low Latency ◽  
Practical Implementation ◽  
Industrial Internet Of Things ◽  
Industrial Internet ◽  
Starting Point ◽  
Hard Real Time

In the design and development process of fog computing solutions for the Industrial Internet of Things (IIoT), we need to take into consideration the characteristics of the industrial environment that must be met. These include low latency, predictability, response time, and operating with hard real-time compiling. A starting point may be the reference fog architecture released by the OpenFog Consortium (now part of the Industrial Internet Consortium), but it has a high abstraction level and does not define how to integrate the fieldbuses and devices into the fog system. Therefore, the biggest challenges in the design and implementation of fog solutions for IIoT is the diversity of fieldbuses and devices used in the industrial field and ensuring compliance with all constraints in terms of real-time compiling, low latency, and predictability. Thus, this paper proposes a solution for a fog node that addresses these issues and integrates industrial fieldbuses. For practical implementation, there are specialized systems on chips (SoCs) that provides support for real-time communication with the fieldbuses through specialized coprocessors and peripherals. In this paper, we describe the implementation of the fog node on a system based on Xilinx Zynq UltraScale+ MPSoC ZU3EG A484 SoC.

scholarly journals Applying a Cerebellar Model Articulation Controller Neural Network to a Photovoltaic Power Generation System Fault Diagnosis

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Kuei-Hsiang Chao ◽  
Bo-Jyun Liao ◽  
Chin-Pao Hung
Keyword(s):  
Neural Network ◽  
Power Generation ◽  
Fault Diagnosis ◽  
Cerebellar Model Articulation Controller ◽  
Training Process ◽  
Cmac Neural Network ◽  
Photovoltaic Power ◽  
Training Samples ◽  
Parallel Connections ◽  
Model Features

This study employed a cerebellar model articulation controller (CMAC) neural network to conduct fault diagnoses on photovoltaic power generation systems. We composed a module array using 9 series and 2 parallel connections of SHARP NT-R5E3E 175 W photovoltaic modules. In addition, we used data that were outputted under various fault conditions as the training samples for the CMAC and used this model to conduct the module array fault diagnosis after completing the training. The results of the training process and simulations indicate that the method proposed in this study requires fewer number of training times compared to other methods. In addition to significantly increasing the accuracy rate of the fault diagnosis, this model features a short training duration because the training process only tunes the weights of the exited memory addresses. Therefore, the fault diagnosis is rapid, and the detection tolerance of the diagnosis system is enhanced.

Sign in / Sign up

Export Citation Format

Share Document