scholarly journals Topology optimization of transmission gearbox under multiple working loads

2018 ◽  
Vol 10 (11) ◽  
pp. 168781401881345 ◽  
Author(s):  
Mingxuan Liang ◽  
Jianhong Hu ◽  
Shuqing Li ◽  
Zhigao Chen
Keyword(s):  
Finite Element ◽  
Topology Optimization ◽  
Finite Element Model ◽  
Lightweight Design ◽  
Dynamic Performance ◽  
Reference Value ◽  
Element Model ◽  
Optimization Method ◽  
Dynamic Excitation ◽  
Topology Optimization Method

This article is concerned with topology optimization of transmission gearbox under multiple working loads by taking dynamic performance as research object. First, the dynamic excitation model and finite element model are established, the vibration responses of the key points on gearbox are obtained by applying dynamic excitation on finite element model based on modal dynamic method, and the simulation responses are compared with testing results to validate finite element model. Finally, the gearbox structure is optimized by utilizing topology optimization method, and the lightweight model of transmission gearbox structure is redesigned. The dynamic performance indexes such as natural frequency are improved obviously, which indicates that the topology optimization method is very effective in optimizing dynamic performance of complex gearbox structure. The research has an important theoretical significance and reference value for lightweight design of transmission gearbox structure.

scholarly journals A topology optimization method of robot lightweight design based on the finite element model of assembly and its applications

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042093648
Author(s):  
Liansen Sha ◽  
Andi Lin ◽  
Xinqiao Zhao ◽  
Shaolong Kuang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Lightweight Design ◽  
Element Model ◽  
Optimization Method ◽  
Maximum Displacement ◽  
Element Analysis ◽  
Upper Limb Exoskeleton ◽  
Topology Optimization Method

Topology optimization is a widely used lightweight design method for structural design of the collaborative robot. In this article, a topology optimization method for the robot lightweight design is proposed based on finite element analysis of the assembly so as to get the minimized weight and to avoid the stress analysis distortion phenomenon that compared the conventional topology optimization method by adding equivalent confining forces at the analyzed part’s boundary. For this method, the stress and deformation of the robot’s parts are calculated based on the finite element analysis of the assembly model. Then, the structure of the parts is redesigned with the goal of minimized mass and the constraint of maximum displacement of the robot’s end by topology optimization. The proposed method has the advantages of a better lightweight effect compared with the conventional one, which is demonstrated by a simple two-linkage robot lightweight design. Finally, the method is applied on a 5 degree of freedom upper-limb exoskeleton robot for lightweight design. Results show that there is a 10.4% reduction of the mass compared with the conventional method.

Reverse Modeling and Topological Optimization for Lightweight Design of Automobile Wheel Hubs with Hollow Ribs

2019 ◽  
Vol 17 (09) ◽  
pp. 1950064
Author(s):  
P. F. Xu ◽  
S. Y. Duan ◽  
F. Wang
Keyword(s):  
Finite Element ◽  
Lightweight Design ◽  
Element Model ◽  
Optimization Method ◽  
Modeling Technique ◽  
Topological Optimization ◽  
Time Interval ◽  
Braking Performance ◽  
Existing Structures ◽  
Physical Conditions

Lightweight of wheel hubs is the linchpin for reducing the unsprung mass and improving the vehicle dynamic and braking performance of vehicles, thus, sustaining stability and comfortability. Current experience-based lightweight designs of wheel hubs have been argued to render uneven distribution of materials. This work develops a novel method to combine the reverse modeling technique with the topological optimization method to derive lightweight wheel hubs based on the principles of mechanics. A reverse modeling technique is first adopted to scan and reproduce the prototype 3D geometry of the wheel hub with solid ribs. The finite element method (FEM) is then applied to perform stress analysis to identify the maximum stress and its location of wheel hub under variable potential physical conditions. The finite element model is then divided into optimization region and nonoptimized region: the former is the interior portion of spoke and the latter is the outer surface of the spoke. A topology optimization is then conducted to remove the optimization region which is interior material of the spokes. The hollow wheel hub is then reconstructed with constant wall thickness about 5[Formula: see text]mm via a reverse modeling technique. The results show that the reconstructed model can reduce the mass of 12.7% compared to the pre-optimized model. The present method of this paper can guarantee the optimal distribution of wheel hub material based on mechanics principle. It can be implemented automatically to shorten the time interval for optimal lightweight designs. It is especially preferable for many existing structures and components as it maintains the structural appearance of optimization object.

scholarly journals Lightweight Design of Front Suspension Upright of Electric Formula Car Based on Topology Optimization Method

2020 ◽  
Vol 11 (1) ◽  
pp. 15 ◽  
Author(s):  
Jixiong Li ◽  
Jianliang Tan ◽  
Jianbin Dong
Keyword(s):  
Topology Optimization ◽  
Optimization Design ◽  
Lightweight Design ◽  
Geometric Model ◽  
Load Condition ◽  
Optimization Method ◽  
Structure Design ◽  
Front Suspension ◽  
Emergency Braking ◽  
Topology Optimization Method

In order to obtain a lightweight front upright of an electric formula car’s suspension, the topology optimization method is used in the front upright structure design. The mathematical model of the lightweight optimization design is constructed, and the geometric model of the initial design of the front upright is subjected to the ultimate load condition. The structural optimization of a front upright resulted in the mass reduction of the upright by 60.43%. The optimized model was simulated and verified regarding the strength, stiffness, and safety factor under three different conditions, namely turning braking, emergency braking, and sharp turning. In the experiment, the uprights were machined and assembled and integrated into the racing suspension. The experimental results showed that the optimized front uprights met the requirements of performance.

Displacement and Stress Constrained Topology Optimization

2013 ◽  
Author(s):  
Meisam Takalloozadeh ◽  
Krishnan Suresh
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Level Set ◽  
Numerical Experiments ◽  
Optimization Method ◽  
Stress Constraints ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Topology Optimization Method

The objective of this paper is to demonstrate a topology optimization method subject to displacement and stress constraints. The method does not rely on pseudo-densities; instead it exploits the concept of topological level-set where ‘partial’ elements are avoided. Consequently: (1) the stresses are well-defined at all points within the evolving topology, and (2) the finite-element analysis is robust and efficient. Further, in the proposed method, a series of topologies of decreasing volume fractions are generated in a single optimization run. The method is illustrated through numerical experiments in 2D.

scholarly journals Finite Element Simulation for Dynamic Performance of a Dummy’s Head in Helicopter Anti-prang Tests

2018 ◽  
Vol 232 ◽  
pp. 02006
Author(s):  
Jingfa Lei ◽  
Yan Xuan ◽  
Tao Liu ◽  
Miao Zhang ◽  
Hong Sun
Keyword(s):  
Finite Element ◽  
Dynamic Performance ◽  
Reference Value ◽  
Element Model ◽  
Simulation Method ◽  
Head Model ◽  
Fe Model ◽  
Element Simulation ◽  
Dynamic Performances ◽  
Reference Index

The dynamic performance of a dummy’s head plays a important role in the research of helicopter anti-prang testing. In this paper, we firstly construct the finite element model for a dummy’s head based on the parameter features of 50th percentile Chinese pilot. Then, the dynamic performance of the head model is simulated according to the calibration rules. After comparing the simulation results with the reference index of the dummy head’s dynamic performances, we find that the FE model has good anthropopathic integrality, and the simulation method used to analyze the dynamic performance of the dummy’s head is correct and validated. This paper has practical guiding significance in the study of helicopter anti-prang testing and other dummy parts, which also provide the reference value for the improvement of dummy structure.

Sign in / Sign up

Export Citation Format

Share Document