scholarly journals Reverse Shoulder Arthroplasty Using a Bone-preserving Glenoid Component: Clinical and Radiographic Outcomes

2018 ◽  
Vol 2 ◽  
pp. 247154921876168 ◽  
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark E Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Deep Infection ◽  
Glenoid Component ◽  
Cuff Tear ◽  
Radiographic Outcomes ◽  
Humeral Component ◽  
And Function ◽  
Rate Of Failure

Introduction Primary reverse shoulder arthroplasty has been reported to provide good outcomes. The majority of designs utilize a large portion of the glenoid. Some studies have reported worrisome rates of notching and stress fractures of the acromion or scapular spine. The purpose of this study was to determine the outcome and complications of a bone-preserving reverse prosthesis with limited ingrowth glenoid surface paired with an onlay humeral component. Materials and methods Between 2014 and 2015, 96 reverse arthroplasties were implanted using a bone-preserving reverse with a 135° onlay humeral bearing. Six patients died. The remaining 87 patients (90 shoulders) were followed for 2 years or until revision. Mean age was 69.3 years. The underlying diagnosis was cuff tear arthropathy (13), irreparable cuff tear (39), osteoarthritis (32), and other (6). Shoulders were followed for 2 years or until revision surgery. Results Reverse shoulder arthroplasty resulted in significant improvements in pain, motion, and function. At most recent follow-up, 74 shoulders had no or mild pain. Elevation was 131° ± 31° and external rotation 46° ± 21°. The mean American Shoulder and Elbow Surgeons (ASES) score was 76. There were 4 reoperations for deep infection (2), periprosthetic fracture, and glenoid loosening. None of the remaining arthroplasties were loose. There was one stress fracture of the acromion and one of the spine of the scapula. No radiographic notching or dislocation was observed. Discussion Primary reverse arthroplasty using a bone-preserving glenoid component and an anatomic onlay humeral bearing provides satisfactory clinical outcomes with a very low rate of failure and complications.

scholarly journals Anatomic Total Shoulder Arthroplasty Using a Self-Pressurizing Pegged Bone-Preserving Cemented Glenoid Component: A 2- to 5-Year Follow-up Study

2018 ◽  
Vol 2 ◽  
pp. 247154921775047
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Loose Body ◽  
Deep Infection ◽  
Glenoid Component ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties ◽  
And Function

Background: High rates of radiographic loosening have been reported with various glenoid designs. Many available designs sacrifice most of the bone at the central portion of the glenoid vault, creating large areas of deficiency when revision becomes necessary. The purpose of this study was to report the 2- to 5-year outcome of shoulder arthroplasty using a bone-preserving all-polyethylene glenoid components with self-pressurizing pegs. Methods: Between August 2011 and December 2014, 202 consecutive anatomic total shoulder arthroplasties (TSAs) were performed by a single surgeon with implantation of a self-pressurizing cemented pegged glenoid component in 190 patients (12 patients had both shoulders replaced). Patients were followed up prospectively and evaluated for pain, motion, strength, American Shoulder and Elbow Surgeons (ASES) scores, and radiographic changes. The mean follow-up time was 2.7 (2–5) years. Results: TSA improved pain and function reliably. At the most recent follow-up, 94% of the shoulders had no or mild pain. Motion included 154 ± 25° of elevation, 68 ± 18° of external rotation, and median internal rotation to T10 (range, iliac crest to T4). The most recent average ASES score was 82 ± 15 points. Early postoperative radiographs showed no radiolucent lines. No humeral or glenoid component was considered radiographically loose at the most recent follow-up. Complications requiring reoperation included subscapularis insufficiency (4), posterior instability (2), deep infection (1), stiffness (1), and a painful loose body (1). No components were revised for loosening. Conclusions: Anatomic TSA using a cemented bone-preserving all-polyethylene pegged self-pressurizing glenoid component provided satisfactory clinical outcomes and survival at 2 to 5 years.

scholarly journals Bony increased-offset reverse shoulder arthroplasty: A meta-analysis of the available evidence

2020 ◽  
pp. 175857322091684
Author(s):  
Richard Dimock ◽  
Mohamed Fathi Elabd ◽  
Mohamed Imam ◽  
Mark Middleton ◽  
Arnaud Godenèche ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Controlled Trial ◽  
Meta Analysis ◽  
Reverse Shoulder Arthroplasty ◽  
Case Series ◽  
Autogenous Bone ◽  
Radiographic Outcomes ◽  
Outcome Scores

Background Reverse shoulder arthroplasty (RSA) has revolutionized the management of many shoulder pathologies. Lateralization has become favourable to combat complications (e.g. notching, compromised external rotation), using a metallic, or autogenous bone-graft baseplates – bony increased-offset reverse shoulder arthroplasty (BIO-RSA). We systematically reviewed the literature to determine: Does BIO-RSA improve range of motion and outcome scores? Are notching rates decreased? Does the graft heal? Methods All available prospective studies, trials and case series reporting on BIO-RSA were included. Outcomes were grouped into outcome scores, range of motion and radiographic outcomes. Data were pooled and statistical analysis performed. Results Eight studies reported on 385 RSA – 235 BIO-RSA and 150 standard-RSA (STD-RSA). Follow-up was 20–36 months; average age 74 years. Outcome scores: Constant-Murley and SSV scores showed statistically significant post-operative benefit of BIO-RSA (mean-difference 4.0 (95% confidence interval (CI): 0.79,7.1) and 6.8 (95% CI: 3.8, 9.9)). No Minimal Clinically Importance Difference was surpassed. Range of motion: No difference was found in any direction. Notching: Notching was less likely with BIO-RSA (odds ratio 0.19 (95% CI: 0.10, 0.38)). Healing and loosening: 92% grafts fully healed/incorporated. Loosening rate was 2.4%. Conclusions Literature on BIO-RSA is limited with only one randomised controlled trial (RCT). Weak evidence exists for improved outcome scores. Range of motion is equivocal. Notching rates are significantly lower in BIO-RSA. The graft usually heals.

Glenosphere design affects range of movement and risk of friction-type scapular impingement in reverse shoulder arthroplasty

2018 ◽  
Vol 100-B (9) ◽  
pp. 1182-1186 ◽  
Author(s):  
B. S. Werner ◽  
J. Chaoui ◽  
G. Walch
Keyword(s):  
Internal Rotation ◽  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Large Diameter ◽  
Glenoid Component ◽  
Range Of Movement ◽  
Scapular Notching ◽  
Component Size ◽  
Centre Of Rotation

Aims Scapular notching is a frequently observed radiographic phenomenon in reverse shoulder arthroplasty (RSA), signifying impingement of components. The purposes of this study were to evaluate the effect of glenoid component size and glenosphere type on impingement-free range of movement (ROM) for extension and internal and external rotation in a virtual RSA model, and to determine the optimal configuration to reduce the incidence of friction-type scapular notching. Materials and Methods Preoperative CT scans obtained in 21 patients (three male, 18 female) with primary osteoarthritis were analyzed using modelling software. Two concurrent factors were tested for impingement-free ROM and translation of the centre of rotation: glenosphere diameter (36 mm vs 39 mm) and type (centred, 2 mm inferior eccentric offset, 10° inferior tilt). Results Glenosphere size was most predictive of increased extension and external rotation, whereas lateralization of the centre of rotation was the most predictive factor for internal rotation. A larger diameter of glenosphere combined with a 10° tilted configuration demonstrated superior values for extension and external rotation, whereas the eccentric component improved internal rotation by a mean 8.9° (standard deviation 2.7°) compared with a standard concentric glenosphere. Conclusion Glenosphere configuration can be modified to increase range of movement in RSA. Friction-type scapular notching was most effectively reduced by use of a large-diameter glenosphere with 10° inferior tilt. Cite this article: Bone Joint J 2018;100-B:1182–6.

Onlay versus inlay humeral components in reverse shoulder arthroplasty: A systematic review and meta-analysis

2021 ◽  
pp. 175857322110671
Author(s):  
Garrett R Jackson ◽  
Joshua Meade ◽  
Bradley L Young ◽  
David P Trofa ◽  
Shadley C Schiffern ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Meta Analysis ◽  
Reverse Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Forward Flexion ◽  
Scapular Fractures ◽  
Humeral Component ◽  
Significant Difference ◽  
Vas Scores

Background Advances have been made to the traditional inlay Grammont Reverse Shoulder Arthroplasty (RSA) design such as the onlay humeral component prosthesis. Currently, there is no agreement in the literature regarding the best option for the humeral component when comparing inlay and onlay designs. This review compares the outcomes and complications between onlay versus inlay humeral components for RSA. Methods A literature search was conducted using PubMed and Embase. Only studies reporting outcomes comparing onlay versus inlay RSA humeral components were included. Results Four studies with 298 patients (306 shoulders) were included. Onlay humeral components were associated with better external rotation (ER) ( p < 0.0001). No significant difference in forward flexion (FF) or abduction was found. Constant scores (CS) and VAS scores did not differ. Increased scapular notching was found in the inlay group (23.18%) versus the onlay group (7.74%) ( p = 0.02). Postoperative scapular fractures and acromial fractures did not differ. Conclusion Onlay and inlay RSA designs are associated with improved postoperative range of motion (ROM). Onlay humeral designs may be associated with greater ER and lower rate of scapular notching; however, no difference was found in Constant and VAS scores, so further studies are required to assess the clinical significance of these differences.

scholarly journals Reverse Shoulder Prosthesis With a Lateralized Glenosphere: Early Results of a Prospective Multicenter Study Stratified by Diagnosis

2019 ◽  
Vol 3 ◽  
pp. 247154921984404 ◽  
Author(s):  
Samer S Hasan ◽  
Jonathan C Levy ◽  
Zachary R Leitze ◽  
Avinash G Kumar ◽  
Gary D Harter ◽  
...  
Keyword(s):  
Rotator Cuff ◽  
Rotator Cuff Tear ◽  
Multicenter Study ◽  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Design Team ◽  
Scapular Notching ◽  
Cuff Tear ◽  
Glenohumeral Arthritis

Background We report here on the results, stratified by diagnosis, of a multicenter prospective study by surgeons unaffiliated with the design team of reverse shoulder arthroplasty (RSA) performed using a lateralized glenosphere. We hypothesized that outcomes would be comparable to those reported previously.Methods: A total of 245 patients underwent RSA for cuff tear arthropathy or glenohumeral arthritis with rotator cuff tear, rotator cuff tear with instability or escape and without glenohumeral arthritis, or failed shoulder arthroplasty. Clinical, radiographic, and self-assessed outcome measures were obtained preoperatively and at standardized time points postoperatively. At 2 years, 173 patients were available as 23 patients were deceased, 12 had undergone revision, and 37 were unavailable.Results: Range of motion and outcomes improved, irrespective of diagnosis. Active forward flexion, abduction, and external rotation improved (73°–127°, 65°–109°, and 24°–37°, respectively, P < .0001 for all). Simple Shoulder Test (3.2–8.5) and American Shoulder and Elbow Surgeons scores (45–86) also improved. Scapular notching occurred in 13.3%; scapular spine/acromial fractures in 6.5%. Patients undergoing revision shoulder arthroplasty improved more modestly.Conclusion: In this multicenter study, surgeons unaffiliated with the design team obtained clinical improvements comparable to those reported previously and that exceeded minimal clinically important differences for RSA. Improvements in external rotation and low scapular notching rates potentially relate to the lateralized design.

The biomechanical effectiveness of tendon transfers to restore rotation after reverse shoulder arthroplasty: latissimus versus lower trapezius

2020 ◽  
pp. 175857322094625
Author(s):  
Kevin Chan ◽  
G Daniel G Langohr ◽  
George S Athwal ◽  
James A Johnson
Keyword(s):  
Internal Rotation ◽  
Shoulder Arthroplasty ◽  
Latissimus Dorsi ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Pectoralis Major ◽  
Tendon Transfers ◽  
Humeral Component ◽  
Pectoralis Major Transfer ◽  
Lower Trapezius

Background The purpose of this biomechanical simulator study was primarily to compare latissimus dorsi to lower trapezius tendon transfers for active external rotation and the pectoralis major transfer for internal rotation after reverse shoulder arthroplasty. Secondarily, the role of humeral component lateralization on transfer function was assessed. Methods Eight rotator cuff deficient cadavers underwent reverse shoulder arthroplasty with an adjustable lateralization humeral component. Latissimus dorsi and lower trapezius transfers were compared for active external rotation restoration and pectoralis major transfer for internal rotation restoration. Internal rotation/external rotation torques were measured for each lateralization at varying abduction and internal rotation/external rotation ranges-of-motion. Results The lower trapezius transfer generated, on average, 1.6 ± 0.2 nm more torque than the latissimus dorsi transfer (p < 0.001). The internal rotation/external rotation torques of all tendon transfers decreased as abduction increased (p < 0.01). At 0° elevation, reverse shoulder arthroplasty humeral component lateralization had a significant positive effect on tendon transfer torque at 60° internal rotation and external rotation (p < 0.01). Discussion Both the lower trapezius and the latissimus dorsi tendon transfers were effective in restoring active external rotation after reverse shoulder arthroplasty; however, the lower trapezius generated significantly more torque. Additionally, the pectoralis major transfer was effective in restoring active internal rotation. All tendon transfers were optimized with greater humeral component lateralization.

scholarly journals Is limited external rotation after reverse shoulder arthroplasty associated with glenoidal notching?

2021 ◽  
Author(s):  
Alexandra Grob ◽  
Samy Bouaicha ◽  
Marco Germann ◽  
Sabra Germann ◽  
Christian Gerber ◽  
...  
Keyword(s):  
Rotator Cuff ◽  
Shoulder Arthroplasty ◽  
Radiographic Progression ◽  
External Rotation ◽  
Constant Score ◽  
Reverse Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Cuff Tear ◽  
Over Time

Abstract Background Reverse shoulder arthroplasty (RSA) is a valuable solution for patients with shoulder pain or injury primarily due to a rotator cuff tear or secondary to traumatic events. Nevertheless, several complications are known to appear, with the most frequent being scapular notching (SN) on the inferior and posterior scapular neck. Controversial data exist about the clinical relevance of SN. Since further consequences are still not clearly understood, we aimed to provide more clarity on which factors, especially external rotation (ER), contribute to the appearance and progress of notching. Methods Constant Score (CS), Subjective Shoulder Value (SSV), flexion, abduction, and ER were evaluated retrospectively in 153 shoulders of 147 patients (mean age 79±7.7 years; 62% women) who underwent RSA between 2005 and 2010. Anteroposterior radiographs were evaluated before and 1, 2, 3, and 5 years after RSA for SN according to the Sirveaux classification. The evaluation was performed by two independent surgeons. Spearman’s coefficient and t-test were used. Results CS, SSV, flexion, and abduction increased significantly 1 year after RSA compared to before (all p < 0.0001). No improvement was shown for ER between the same timepoints. Between 2 and 5 years of follow-up, only flexion decreased by 5°(p = 0.02) while CS, SSV, abduction, and ER remained constant. After RSA, notching increases over time. There was no association between SN and CS, SSV, flexion, abduction or ER at any of the measured timepoints. Higher flexion correlated with higher abduction after RSA at every follow-up (1 year r = 0.88, 2 years r = 0.89, 3 years r = 0.86, 5 years r = 0.86). The interrater correlation test showed a strong correlation (r = 0.7). Conclusion We verified the functional benefits of RSA for patients. Additionally, our findings show that despite radiographic progression of notching and unchanged limited ER, the postoperative improvements in CS, SSV, flexion, and abduction are preserved over 5 years.

scholarly journals Comparative Outcomes of Various Combinations of Bilateral Shoulder Arthroplasty

Hand ◽  
2019 ◽  
Vol 15 (5) ◽  
pp. 707-712 ◽  
Author(s):  
Jennifer Kurowicki ◽  
Jacob J. Triplet ◽  
Samuel Rosas ◽  
Derek D. Berglund ◽  
Brandon Horn ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Patient Reported Outcome Measures ◽  
Patient Reported Outcome ◽  
Simple Shoulder Test ◽  
Patient Reported ◽  
And Function

Background: In the setting of bilateral shoulder arthroplasty (BSA), differences in functional outcomes and motion between anatomic total shoulder arthroplasty (TSA) and reverse shoulder arthroplasty (RSA) are unknown. The purpose of this study was to compare the effectiveness of treatment for various combinations of TSA procedures. Methods: A review of prospectively collected data from an institutional shoulder surgery repository was performed for patients who underwent any combination of bilateral TSA or RSA surgery. Based on the combination of shoulder arthroplasty, patients were divided into the following subgroups: bilateral TSA (TSA/TSA), bilateral RSA (RSA/RSA), or unilateral TSA with contralateral RSA (TSA/RSA). A total of 73 patients (146 shoulders), with a minimum of 2-year follow-up, who underwent any combination of bilateral TSA or RSA from 2007 to 2014 were included. Pre- and postoperative patient-reported outcome measures and measured motion were evaluated between the 3 groups. Results: There were 47 TSA/TSA, 17 RSA/RSA, and 9 TSA/RSA patients with a mean age of 72 years and mean follow-up of 51 months. Preoperatively, TSA/TSA had significantly higher Simple Shoulder Test scores, Visual Analog Scale (VAS) function, active elevation, and active external rotation compared with RSA/RSA. Postoperative scores were significantly superior in TSA/TSA compared with other combinations of shoulder arthroplasty except VAS pain and function. Change in pre- to postoperative (effectiveness of treatment) internal rotation was superior in the TSA/TSA group compared with RSA/RSA and TSA/RSA; however, no other differences were observed. Conclusions: Bilateral TSA patients have higher preoperative function and motion. Although some postoperative outcomes differ among combinations of BSA, the overall effectiveness of treatment for patients undergoing BSA is similar between various combinations of arthroplasty.

scholarly journals Imaging of shoulder arthroplasties and their complications: a pictorial review

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Damien Combes ◽  
Romain Lancigu ◽  
Patrick Desbordes de Cepoy ◽  
Filippo Caporilli-Razza ◽  
Laurent Hubert ◽  
...  
Keyword(s):  
Joint Replacement ◽  
Shoulder Arthroplasty ◽  
Shoulder Joint ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Glenoid Component ◽  
Humeral Component ◽  
Number Of Patients ◽  
Component Loosening ◽  
Shoulder Arthroplasties

Abstract Currently, an increasing number of patients benefit from shoulder prosthesis implantation. Radiologists are therefore more often confronted with imaging examinations involving shoulder arthroplasty, whether during a dedicated examination or incidentally. Standard radiography is the first-line imaging modality in the follow-up of these implants, before the possible use of cross-sectional imaging modalities (computed tomography and magnetic resonance imaging), ultrasound, or nuclear medicine examinations. Shoulder arthroplasties are divided into three categories: reverse shoulder arthroplasty, total shoulder arthroplasty, and partial shoulder joint replacement (including humeral hemiarthroplasty and humeral head resurfacing arthroplasty). Each of these prostheses can present complications, either shared by all types of arthroplasty or specific to each. Infection, periprosthetic fractures, humeral component loosening, heterotopic ossification, implant failure, and nerve injury can affect all types of prostheses. Instability, scapular notching, and acromial fractures can be identified after reverse shoulder arthroplasty implantation. Glenoid component loosening and rotator cuff tear are specific complications of total shoulder arthroplasty. Progressive wear of the native glenoid is the only specific complication observed in partial shoulder joint replacement. Knowledge of different types of shoulder prostheses and their complications’ radiological signs is crucial for the radiologist to initiate prompt and adequate management.

Sign in / Sign up

Export Citation Format

Share Document