scholarly journals A throughput analysis of an energy-efficient spectrum sensing scheme for the cognitive radio-based Internet of things

Author(s):  
Md Sipon Miah ◽  
Michael Schukat ◽  
Enda Barrett

AbstractSpectrum sensing in a cognitive radio network involves detecting when a primary user vacates their licensed spectrum, to enable secondary users to broadcast on the same band. Accurately sensing the absence of the primary user ensures maximum utilization of the licensed spectrum and is fundamental to building effective cognitive radio networks. In this paper, we address the issues of enhancing sensing gain, average throughput, energy consumption, and network lifetime in a cognitive radio-based Internet of things (CR-IoT) network using the non-sequential approach. As a solution, we propose a Dempster–Shafer theory-based throughput analysis of an energy-efficient spectrum sensing scheme for a heterogeneous CR-IoT network using the sequential approach, which utilizes firstly the signal-to-noise ratio (SNR) to evaluate the degree of reliability and secondly the time slot of reporting to merge as a flexible time slot of sensing to more efficiently assess spectrum sensing. Before a global decision is made on the basis of both the soft decision fusion rule like the Dempster–Shafer theory and hard decision fusion rule like the “n-out-of-k” rule at the fusion center, a flexible time slot of sensing is added to adjust its measuring result. Using the proposed Dempster–Shafer theory, evidence is aggregated during the time slot of reporting and then a global decision is made at the fusion center. In addition, the throughput of the proposed scheme using the sequential approach is analyzed based on both the soft decision fusion rule and hard decision fusion rule. Simulation results indicate that the new approach improves primary user sensing accuracy by $$13\%$$ 13 % over previous approaches, while concurrently increasing detection probability and decreasing false alarm probability. It also improves overall throughput, reduces energy consumption, prolongs expected lifetime, and reduces global error probability compared to the previous approaches under any condition [part of this paper was presented at the EuCAP2018 conference (Md. Sipon Miah et al. 2018)].

2010 ◽  
Vol 2010 ◽  
pp. 1-20 ◽  
Author(s):  
Kamran Arshad ◽  
Muhammad Ali Imran ◽  
Klaus Moessner

The main challenge for a cognitive radio is to detect the existence of primary users reliably in order to minimise the interference to licensed communications. Hence, spectrum sensing is a most important requirement of a cognitive radio. However, due to the channel uncertainties, local observations are not reliable and collaboration among users is required. Selection of fusion rule at a common receiver has a direct impact on the overall spectrum sensing performance. In this paper, optimisation of collaborative spectrum sensing in terms of optimum decision fusion is studied for hard and soft decision combining. It is concluded that for optimum fusion, the fusion centre must incorporate signal-to-noise ratio values of cognitive users and the channel conditions. A genetic algorithm-based weighted optimisation strategy is presented for the case of soft decision combining. Numerical results show that the proposed optimised collaborative spectrum sensing schemes give better spectrum sensing performance.


Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2522 ◽  
Author(s):  
Yin Mi ◽  
Guangyue Lu ◽  
Yuxin Li ◽  
Zhiqiang Bao

Spectrum sensing (SS) is an essential part of cognitive radio (CR) technology, and cooperative spectrum sensing (CSS) could efficiently improve the detection performance in environments with fading and shadowing effects, solving hidden terminal problems. Hard and Soft decision detection are usually employed at the fusion center (FC) to detect the presence or absence of the primary user (PU). However, soft decision detection achieves better sensing performance than hard decision detection at the expense of the local transmission band. In this paper, we propose a tradeoff scheme between the sensing performance and band cost. The sensing strategy is designed based on three modules. Firstly, a local detection module is used to detect the PU signal by energy detection (ED) and send decision results in terms of 1-bit or 2-bit information. Secondly, and most importantly, the FC estimates the received decision data through a data reconstruction module based on the statistical distribution such that the extra thresholds are not needed. Finally, a global decision module is in charge of fusing the estimated data and making a final decision. The results from a simulation show that the detection performance of the proposed scheme outperforms that of other algorithms. Moreover, savings on the transmission band cost can be made compared with soft decision detection.


2014 ◽  
Vol 651-653 ◽  
pp. 1941-1944
Author(s):  
Jie Guo ◽  
Da Hai Jing ◽  
Yan Gu

The main task of spectrum sensing in cognitive radio network is to decide whether the primary user is occupying the specific spectrum band or not. So the main purpose of spectrum sensing is to design a detector with better detection performance. This paper studies a spectrum sensing method with clustering under cognitive radio networks. We studied the cooperative spectrum sensing model with clustering by hard fusion rule, and also proposed the simulation model and steps of this cluster-based spectrum sensing problem under Majority rule. Simulation results show that the spectrum sensing method with clustering has better performance than the other methods.


2013 ◽  
Vol 61 (8) ◽  
pp. 1931-1943 ◽  
Author(s):  
Weijia Han ◽  
Jiandong Li ◽  
Zan Li ◽  
Jiangbo Si ◽  
Yan Zhang

Sign in / Sign up

Export Citation Format

Share Document