Two‐dimensional acoustic modeling by a hybrid method

Geophysics ◽  
1985 ◽  
Vol 50 (8) ◽  
pp. 1273-1284 ◽  
Author(s):  
V. Shtivelman
Keyword(s):  
Wave Propagation ◽  
Wave Field ◽  
Inhomogeneous Medium ◽  
Hybrid Method ◽  
Wave Scattering ◽  
Acoustic Modeling ◽  
Two Dimensional ◽  
Numerical Techniques ◽  
Numerical Examples ◽  
Field Computation

This paper follows previous work (Shtivelman, 1984) in which a hybrid method for wave‐field computation was developed. The method combines analytical and numerical techniques and is based upon separation of the processes of wave scattering and wave propagation. The method is further developed and improved; particularly, it is generalized for the case of an inhomogeneous medium above scattering objects (provided the inhomogeneity is weak, i.e., the effects of scattering can be neglected) and is represented by a simpler and more convenient form. Several numerical examples illustrating application of the method to the problems of two‐dimensional acoustic modeling are considered.

Acoustic wave propagation in two dimensional sheared ducted flows

1997 ◽  
Author(s):  
E. Longatte ◽  
P. Lafon ◽  
S. Candel ◽  
E. Longatte ◽  
P. Lafon ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Acoustic Wave ◽  
Two Dimensional ◽  
Acoustic Wave Propagation

scholarly journals Study on X-ray Induced Two-Dimensional Thermal Shock Waves in Carbon/Phenolic

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3553
Author(s):  
Dengwang Wang ◽  
Yong Gao ◽  
Sheng Wang ◽  
Jie Wang ◽  
Haipeng Li
Keyword(s):  
Numerical Simulation ◽  
Shock Wave ◽  
Wave Propagation ◽  
Thermal Shock ◽  
Anisotropic Material ◽  
Energy Deposition ◽  
X Rays ◽  
Two Dimensional ◽  
X Ray ◽  
Deposition Depth

Carbon/Phenolic (C/P), a typical anisotropic material, is an important component of aerospace and often used to protect the thermodynamic effects of strong X-ray radiation. In this paper, we establish the anisotropic elastic-plastic constitutive model, which is embedded in the in-house code “RAMA” to simulate a two-dimensional thermal shock wave induced by X-ray. Then, we compare the numerical simulation results with the thermal shock wave stress generated by the same strong current electron beam via experiment to verify the correctness of the numerical simulation. Subsequently, we discuss and analyze the rules of thermal shock wave propagation in C/P material by further numerical simulation. The results reveal that the thermal shock wave represents different shapes and mechanisms by the radiation of 1 keV and 3 keV X-rays. The vaporization recoil phenomenon appears as a compression wave under 1 keV X-ray irradiation, and X-ray penetration is caused by thermal deformation under 3 keV X-ray irradiation. The thermal shock wave propagation exhibits two-dimensional characteristics, the energy deposition of 1 keV and 3 keV both decays exponentially, the energy deposition of 1 keV-peak soft X-ray is high, and the deposition depth is shallow, while the energy deposition of 3 keV-peak hard X-ray is low, and the deposition depth is deep. RAMA can successfully realize two-dimensional orthotropic elastoplastic constitutive relation, the corresponding program was designed and checked, and the calculation results for inspection are consistent with the theory. This study has great significance in the evaluation of anisotropic material protection under the radiation of intense X-rays.

Effects of geometric and refractive index disorder on wave propagation in two-dimensional photonic crystals

2000 ◽  
Vol 62 (4) ◽  
pp. 5711-5720 ◽  
Author(s):  
A. A. Asatryan ◽  
P. A. Robinson ◽  
L. C. Botten ◽  
R. C. McPhedran ◽  
N. A. Nicorovici ◽  
...  
Keyword(s):  
Refractive Index ◽  
Wave Propagation ◽  
Photonic Crystals ◽  
Two Dimensional
Sign in / Sign up

Export Citation Format

Share Document