Delineating ophiolite-derived host rocks of massive sulfide Cu-Co-Zn deposits with 2D high-resolution seismic reflection data in Outokumpu, Finland

Geophysics ◽  
2012 ◽  
Vol 77 (5) ◽  
pp. WC213-WC222 ◽  
Author(s):  
I. T. Kukkonen ◽  
S. Heinonen ◽  
P. Heikkinen ◽  
P. Sorjonen-Ward
Keyword(s):  
Seismic Data ◽  
Host Rock ◽  
Seismic Reflection ◽  
Massive Sulfide ◽  
High Amplitude ◽  
Ore Deposits ◽  
Acoustic Properties ◽  
Rock Properties ◽  
Seismic Reflection Data ◽  
Reflection Data

Seismic reflection data was applied to a study of the upper crustal structures in the Outokumpu mining and exploration area in eastern Finland. The Cu-Co-Zn sulfide ore deposits of the Outokumpu area are hosted by Palaeoproterozoic ophiolite-derived altered ultrabasic rocks (serpentinite, skarn rock, and quartz rock) and black schist within turbiditic mica schist. Mining in the Outokumpu area has produced a total of 36 Mt of ore from three historical and one active mine. Seismic data comprises 2D vibroseis data surveyed along a network of local roads. The seismic sections provide a comprehensive 3D view of the reflective structures. Acoustic rock properties from downhole logging and synthetic seismograms indicate that the strongly reflective packages shown in the seismic data can be identified as the host-rock environments of the deposits. Reflectors show excellent continuity along the structural grain of the ore belt, which allows correlating reflectors with surface geology, magnetic map, and drilling sections into a broad 3D model of the ore belt. Massive ores have acoustic properties that make them directly detectable with seismic reflection methods assuming the deposit size is sufficient for applied seismic wavelengths. The seismic data revealed numerous interesting high-amplitude reflectors within the interpreted host-rock suites potentially coinciding with sulfides.

Stochastic perturbation optimization for discrete-continuous inverse problems

Geophysics ◽  
2020 ◽  
Vol 85 (5) ◽  
pp. M73-M83 ◽  
Author(s):  
Leonardo Azevedo ◽  
Dario Grana ◽  
Leandro de Figueiredo
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Stochastic Perturbation ◽  
Rock Physics ◽  
Rock Properties ◽  
Petrophysical Properties ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Physics Model ◽  
Rock Physics Model

Accurate subsurface modeling and characterization require the prediction of facies and rock properties within the reservoir model. This is commonly achieved by inverting geophysical data, such as seismic reflection data, using a two-step approach either in the discrete or the continuous domain. We have adopted an iterative simultaneous method, namely, stochastic perturbation optimization, to invert seismic reflection data jointly for facies and rock properties. Facies first are simulated according to a Markov chain model, and then rock properties are generated with stochastic sequential simulation and cosimulation conditioned to each facies. Elastic and seismic data are computed by applying a rock-physics model to the realizations of petrophysical properties and a seismic convolutional model. The similarity between observed and synthetic seismic data is used to update the solution by perturbing facies and rock properties until convergence. Coupling the discrete and continuous domains ensures a consistent perturbation of the reservoir models throughout the iterations. We have evaluated the method in a 1D synthetic example for the estimation of facies and porosity from zero-offset seismic data assuming a linear rock-physics model to demonstrate the validity of the method. Then, we apply the method to a real 3D data set from the North Sea for the joint estimation of facies and petrophysical properties from prestack seismic data. The results show spatially consistent rock and fluid inverted models in which the predicted facies reproduce the vertical ordering as observed in the well data.

scholarly journals Improved Interpretation of Deep Seismic Reflection Data in Areas of Complex Geology Through Integration With Passive Seismic Data Sets

2018 ◽  
Vol 123 (12) ◽  
pp. 10,810-10,830
Author(s):  
Michael Dentith ◽  
Huaiyu Yuan ◽  
Ruth Elaine Murdie ◽  
Perla Pina-Varas ◽  
Simon P. Johnson ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Passive Seismic ◽  
Complex Geology

Shallow seismic reflection study of a glaciated valley

Geophysics ◽  
1998 ◽  
Vol 63 (4) ◽  
pp. 1395-1407 ◽  
Author(s):  
Frank Büker ◽  
Alan G. Green ◽  
Heinrich Horstmeyer
Keyword(s):  
Seismic Reflection ◽  
High Amplitude ◽  
Data Sets ◽  
Seismic Section ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Northern Switzerland ◽  
Reflection Data ◽  
Shallow Seismic ◽  
Glaciated Valley

Shallow seismic reflection data were recorded along two long (>1.6 km) intersecting profiles in the glaciated Suhre Valley of northern Switzerland. Appropriate choice of source and receiver parameters resulted in a high‐fold (36–48) data set with common midpoints every 1.25 m. As for many shallow seismic reflection data sets, upper portions of the shot gathers were contaminated with high‐amplitude, source‐generated noise (e.g., direct, refracted, guided, surface, and airwaves). Spectral balancing was effective in significantly increasing the strength of the reflected signals relative to the source‐generated noise, and application of carefully selected top mutes ensured guided phases were not misprocessed and misinterpreted as reflections. Resultant processed sections were characterized by distributions of distinct seismic reflection patterns or facies that were bounded by quasi‐continuous reflection zones. The uppermost reflection zone at 20 to 50 ms (∼15 to ∼40 m depth) originated from a boundary between glaciolacustrine clays/silts and underlying glacial sands/gravels (till) deposits. Of particular importance was the discovery that the deepest part of the valley floor appeared on the seismic section at traveltimes >180 ms (∼200 m), approximately twice as deep as expected. Constrained by information from boreholes adjacent to the profiles, the various seismic units were interpreted in terms of unconsolidated glacial, glaciofluvial, and glaciolacustrine sediments deposited during two principal phases of glaciation (Riss at >100 000 and Würm at ∼18 000 years before present).

Late Cretaceous – Cenozoic history of the transition zone between the East European Craton and the Paleozoic Platform, Polish sector of the Baltic Sea, revealed by new offshore regional seismic reflection data (BALTEC project)

2021 ◽  
Author(s):  
Piotr Krzywiec ◽  
Łukasz Słonka ◽  
Quang Nguyen ◽  
Michał Malinowski ◽  
Mateusz Kufrasa ◽  
...  
Keyword(s):  
High Resolution ◽  
Late Cretaceous ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Upper Cretaceous ◽  
Seismic Reflection Data ◽  
East European ◽  
Reflection Data ◽  
Multichannel Seismic Reflection ◽  
Multichannel Seismic Reflection Data

<p>In 2016, approximately 850 km of high-resolution multichannel seismic reflection data of the BALTEC survey have been acquired offshore Poland within the transition zone between the East European Craton and the Paleozoic Platform. Data processing, focused on removal of multiples, strongly overprinting geological information at shallower intervals, included SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow Water De-Multiple). Entire dataset was Kirchhoff pre-stack time migrated. Additionally, legacy shallow high-resolution multichannel seismic reflection data acquired in this zone in 1997 was also used. All this data provided new information on various aspects of the Phanerozoic evolution of this area, including Late Cretaceous to Cenozoic tectonics and sedimentation. This phase of geological evolution could be until now hardly resolved by analysis of industry seismic data as, due to limited shallow seismic imaging and very strong overprint of multiples, essentially no information could have been retrieved from this data for first 200-300 m. Western part of the BALTEC dataset is located above the offshore segment of the Mid-Polish Swell (MPS) – large anticlinorium formed due to inversion of the axial part of the Polish Basin. BALTEC seismic data proved that Late Cretaceous inversion of the Koszalin – Chojnice fault zone located along the NE border of the MPS was thick-skinned in nature and was associated with substantial syn-inversion sedimentation. Subtle thickness variations and progressive unconformities imaged by BALTEC seismic data within the Upper Cretaceous succession in vicinity of the Kamień-Adler and the Trzebiatów fault zones located within the MPS documented complex interplay of Late Cretaceous basin inversion, erosion and re-deposition. Precambrian basement of the Eastern, cratonic part of the study area is overlain by Cambro-Silurian sedimentary cover. It is dissected by a system of steep, mostly reverse faults rooted in most cases in the deep basement. This fault system has been regarded so far as having been formed mostly in Paleozoic times, due to the Caledonian orogeny. As a consequence, Upper Cretaceous succession, locally present in this area, has been vaguely defined as a post-tectonic cover, locally onlapping uplifted Paleozoic blocks. New seismic data, because of its reliable imaging of the shallowest substratum, confirmed that at least some of these deeply-rooted faults were active as a reverse faults in latest Cretaceous – earliest Paleogene. Consequently, it can be unequivocally proved that large offshore blocks of Silurian and older rocks presently located directly beneath the Cenozoic veneer must have been at least partly covered by the Upper Cretaceous succession; then, they were uplifted during the widespread inversion that affected most of Europe. Ensuing regional erosion might have at least partly provided sediments that formed Upper Cretaceous progradational wedges recently imaged within the onshore Baltic Basin by high-end PolandSPAN regional seismic data. New seismic data imaged also Paleogene and younger post-inversion cover. All these results prove that Late Cretaceous tectonics substantially affected large areas located much farther towards the East than previously assumed.</p><p>This study was funded by the Polish National Science Centre (NCN) grant no UMO-2017/27/B/ST10/02316.</p>

scholarly journals Monte Carlo reservoir analysis combining seismic reflection data and informed priors

Geophysics ◽  
2015 ◽  
Vol 80 (1) ◽  
pp. R31-R41 ◽  
Author(s):  
Andrea Zunino ◽  
Klaus Mosegaard ◽  
Katrine Lange ◽  
Yulia Melnikova ◽  
Thomas Mejer Hansen
Keyword(s):  
Monte Carlo ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Probabilistic Approach ◽  
Multiple Point ◽  
Petroleum Reservoir ◽  
Inversion Algorithm ◽  
Reservoir Properties ◽  
Seismic Reflection Data ◽  
Reflection Data

Determination of a petroleum reservoir structure and rock bulk properties relies extensively on inference from reflection seismology. However, classic deterministic methods to invert seismic data for reservoir properties suffer from some limitations, among which are the difficulty of handling complex, possibly nonlinear forward models, and the lack of robust uncertainty estimations. To overcome these limitations, we studied a methodology to invert seismic reflection data in the framework of the probabilistic approach to inverse problems, using a Markov chain Monte Carlo (McMC) algorithm with the goal to directly infer the rock facies and porosity of a target reservoir zone. We thus combined a rock-physics model with seismic data in a single inversion algorithm. For large data sets, the McMC method may become computationally impractical, so we relied on multiple-point-based a priori information to quantify geologically plausible models. We tested this methodology on a synthetic reservoir model. The solution of the inverse problem was then represented by a collection of facies and porosity reservoir models, which were samples of the posterior distribution. The final product included probability maps of the reservoir properties in obtained by performing statistical analysis on the collection of solutions.

Labeling long‐period multiple reflections

Geophysics ◽  
1989 ◽  
Vol 54 (1) ◽  
pp. 122-126 ◽  
Author(s):  
R. J. J. Hardy ◽  
M. R. Warner ◽  
R. W. Hobbs
Keyword(s):  
Seismic Reflection ◽  
High Amplitude ◽  
Data Sets ◽  
Multiple Reflections ◽  
Multiple Series ◽  
Seismic Reflection Data ◽  
Long Period ◽  
Reflection Data ◽  
Zero Offset ◽  
Marine Seismic

The many techniques that have been developed to remove multiple reflections from seismic data all leave remnant energy which can cause ambiguity in interpretation. The removal methods are mostly based on periodicity (e.g., Sinton et al., 1978) or the moveout difference between primary and multiple events (e.g., Schneider et al., 1965). They work on synthetic and selected field data sets but are rather unsatisfactory when applied to high‐amplitude, long‐period multiples in marine seismic reflection data acquired in moderately deep (700 m to 3 km) water. Differential moveout is often better than periodicity at discriminating between types of events because, while a multiple series may look periodic to the eye, it is only exactly so on zero‐offset reflections from horizontal layers. The technique of seismic event labeling described below works by returning offset information from CDP gathers to a stacked section by color coding, thereby discriminating between seismic reflection events by differential normal moveout. Events appear as a superposition of colors; the direction of color fringes indicates whether an event has been overcorrected or undercorrected for its hyperbolic normal moveout.

Instantaneous spectral bandwidth and dominant frequency with applications to seismic reflection data

Geophysics ◽  
1993 ◽  
Vol 58 (3) ◽  
pp. 419-428 ◽  
Author(s):  
Arthur E. Barnes
Keyword(s):  
Instantaneous Frequency ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Power Spectra ◽  
Dominant Frequency ◽  
Center Frequency ◽  
Spectral Bandwidth ◽  
Instantaneous Amplitude ◽  
Seismic Reflection Data ◽  
Reflection Data

Fourier power spectra are often usefully characterized by average measures. In reflection seismology, the important average measures are center frequency, spectral bandwidth, and dominant frequency. These quantities have definitions familiar from probability theory: center frequency is the spectral mean, spectral bandwidth is the standard deviation about that mean, and dominant frequency is the square root of the second moment, which serves as an estimate of the zero‐crossing frequency. These measures suggest counterparts defined with instantaneous power spectra in place of Fourier power spectra, so that they are instantaneous in time though they represent averages in frequency. Intuitively reasonable requirements yield specific forms for these instantaneous quantities that can be computed with familiar complex seismic trace attributes. Instantaneous center frequency is just instantaneous frequency. Instantaneous bandwidth is the absolute value of the derivative of the instantaneous amplitude divided by the instantaneous amplitude. Instantaneous dominant frequency is the square root of the sum of the squares of the instantaneous frequency and instantaneous bandwidth. Instantaneous bandwidth and dominant frequency find employment as additional complex seismic trace attributes in the detailed study of seismic data. Instantaneous bandwidth is observed to be nearly always less than instantaneous frequency; the points where it is larger may mark the onset of distinct wavelets. These attributes, together with instantaneous frequency, are perhaps, of greater use in revealing the time‐varying spectral properties of seismic data. They can help in the search for low frequency shadows or in the analysis of frequency change due to effects of data processing. Instantaneous bandwidth and dominant frequency complement instantaneous frequency and should find wide application in the analysis of seismic reflection data.

scholarly journals Structural Interpretation of Yamama and Naokelekan Formations in Tuba Oil Field Using 2D Seismic Data

2021 ◽  
Vol 54 (2B) ◽  
pp. 55-64
Author(s):  
Belal M. Odeh
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Seismogram ◽  
Oil Field ◽  
Well Log ◽  
Seismic Reflection Data ◽  
Depth Maps ◽  
Reflection Data ◽  
Interpretation Process ◽  
Southern Iraq

This research includes structure interpretation of the Yamama Formation (Lower Cretaceous) and the Naokelekan Formation (Jurassic) using 2D seismic reflection data of the Tuba oil field region, Basrah, southern Iraq. The two reflectors (Yamama and Naokelekan) were defined and picked as peak and tough depending on the 2D seismic reflection interpretation process, based on the synthetic seismogram and well log data. In order to obtain structural settings, these horizons were followed over all the regions. Two-way travel-time maps, depth maps, and velocity maps have been produced for top Yamama and top Naokelekan formations. The study concluded that certain longitudinal enclosures reflect anticlines in the east and west of the study area representing Zubair and Rumaila fold confined between them a fold consist of two domes represents Tuba fold with the same trending of Zubair and Rumaila structures. The study confirmed the importance of this field as a reservoir of the accumulation of hydrocarbons.

scholarly journals Reassessing legacy seismic reflection data. Extracting new information through advanced seismic processing schemes.

2021 ◽  
Author(s):  
Ramon Carbonell ◽  
Yesenia Martinez ◽  
Irene de Felipe ◽  
Juan Alcalde ◽  
Imma Palomeras ◽  
...  
Keyword(s):  
Land Use Planning ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Leading Edge ◽  
Critical Issue ◽  
Commercial Development ◽  
Natural Risk ◽  
Seismic Reflection Data ◽  
Seismic Processing ◽  
Reflection Data

<p><span>Hardware and software innovations taking place since the commercial development of seismic reflection imaging in the 60’s and early 70’s have resulted in various improved powerful seismic imaging solutions. Overall, these have been very successful in contrasting geological environments pursuing a wide variety of different targets. The innovative advances in seismic processing may constitute critical tools when analyzing seismic data acquired in highly heterogeneous geologic environments as they can efficiently increase the resolution power. In addition, they can become relevant when using modern acquisition instrumentation and strategies. Furthermore, these new developments significantly increase the value of legacy seismic reflection data. Currently, reassessing controlled source seismic data is becoming a critical issue mostly due to the increasing difficulties for acquiring new profiles posed by environmental regulations and high prices. However, the knowledge of the subsurface is an asset for our society, for example: </span><span><span>land-use planning and management; natural risk assessments; or exploration and exploitation for geo-resources. Here we present examples of analysis schemes such as seismic attribute analysis and Common Reflection Surface stacking applied on a number of old seismic reflection profiles (Deep lithospheric transects as well as high resolution profiles) in an effort to bring up their validity. Results indicate how these leading edge methods contribute to significantly improve the quality of vintage seismic data, significantly reducing reflector uncertainties and easing their interpretation. </span></span></p><p><span><span>This research is supported by: Generalitat de Catalunya (AGAUR) grant 2017SGR1022 (GREG); EU (H2020) 871121 (EPOS-SP); EIT-RaewMaterias 17024 (SIT4ME). </span></span></p><p> </p>

Sign in / Sign up

Export Citation Format

Share Document