Identification of pore structure variation in a deeply-buried carbonate reservoir through high-resolution seismic inversion

2019 ◽  
Author(s):  
Jingyi Guo ◽  
Yuefeng Sun
Keyword(s):  
High Resolution ◽  
Pore Structure ◽  
Seismic Inversion ◽  
Carbonate Reservoir ◽  
Structure Variation

Improving Porosity–Velocity Relationships Using Carbonate Pore Types

2015 ◽  
Vol 23 (04) ◽  
pp. 1540006 ◽  
Author(s):  
Tingting Zhang ◽  
Yuefeng Sun ◽  
Qifeng Dou ◽  
Hanrong Zhang ◽  
Tonglou Guo ◽  
...  
Keyword(s):  
Pore Structure ◽  
Acoustic Impedance ◽  
Carbonate Rocks ◽  
Seismic Inversion ◽  
Carbonate Reservoir ◽  
Reservoir Rocks ◽  
Fluid Content ◽  
Fracture Fluid ◽  
Poroelastic Model ◽  
Pore Types

Acoustic impedance in carbonates is influenced by factors such as porosity, pore structure/fracture, fluid content, and lithology. Occurrence of moldic and vuggy pores, fractures and other pore structures due to diagenesis in carbonate rocks can greatly complicate the relationships between impedance and porosity. Using a frame flexibility factor ([Formula: see text]) derived from a poroelastic model to characterize pore structure in reservoir rocks, we find that its product with porosity can result in a much better correlation with sonic velocity ([Formula: see text] = [Formula: see text]) and acoustic impedance ([Formula: see text] = [Formula: see text], where A, B, C and D is 6.60, 0.03, 18.3 and 0.09, respectively for the deep low-porosity carbonate reservoir studied in this paper. These new relationships can also be useful in improving seismic inversion of ultra-deep hydrocarbon reservoirs in other similar environments.

High resolution cross‐well imaging of a west texas carbonate reservoir: Part 1. Data acquisition and project overview

1992 ◽  
Author(s):  
J. M. Harris ◽  
Richard Nolen‐Hoeksema ◽  
J. W. Rector ◽  
M. Van Schaack ◽  
S. K. Lazaratos
Keyword(s):  
High Resolution ◽  
Data Acquisition ◽  
Carbonate Reservoir ◽  
West Texas

Geomechanical Model as the Key Step to Proppant Fracturing Success in Shallow Carbonate Reservoir of Bahrain

2021 ◽  
Author(s):  
Ahmed AlJanahi ◽  
Feras Altawash ◽  
Hassan AlMannai ◽  
Sayed Abdelredy ◽  
Hamed Al Ghadhban ◽  
...  
Keyword(s):  
High Resolution ◽  
Horizontal Wells ◽  
Carbonate Reservoir ◽  
Rock Properties ◽  
Stress Profile ◽  
Geomechanical Model ◽  
Breakdown Pressure ◽  
Matrix Permeability ◽  
Geomechanical Analysis ◽  
Horizontal Strain

Abstract Geomechanics play an important role in stimulation design, especially in complex tight reservoirs with very low matrix permeability. Robust modelling of stresses along with rock mechanical properties helps to identify the stress barriers which are crucial for optimum stimulation design and proppant allocation. Complex modeling and calibration workflow showcased the value of geomechanical analysis in a large stimulation project in the Ostracod-Magwa reservoir, a complicated shallow carbonate reservoir in the Bahrain Field. For the initial model, regional average rock properties and minimum stress values from earlier frack campaigns were considered. During campaign progression, advanced cross dipole sonic measurements of the new wells were incorporated in the geomechanical modeling which provided rock properties and stresses with improved confidence. The outputs from wireline-conveyed microfrac tests and the fracturing treatments were also considered for calibration of the minimum horizontal stress and breakdown pressure. The porepressure variability was established with the measured formation pressure data. The geomechanically derived horizontal stresses were used as input for the frack-design. Independent fracture geometry measurements were run to validate the model. The poro-elastic horizontal strain approach was taken to model the horizontal stresses, which shows better variability of the stress profile depending on the elastic rock properties. The study shows variable depletion in porepressure across the field as well as within different reservoir layers. The Ostracod reservoir is more depleted than Magwa, with porepressure values lower than hydrostatic (∼7 ppg). The B3 shale layer in between the Magwa and Ostracod reservoirs is a competent barrier with 1200-1500psi closure pressure. The closure pressures in the Ostracod and Magwa vary from 1000-1500psi and 1100-1600psi, respectively. There is a gradual increasing trend observed in closure pressure in Magwa with depth, but no such trend is apparent in the shallower Ostracod formation. High resolution stress profiles help to identify the barriers within each reservoir to place horizontal wells and quantify the magnitude of hydraulic fracture stress barriers along horizontal wells. The geomechanical model served as a key part of the fracturing optimization workflow, resulting in more than double increase in wells productivity compared to previous stimulation campaigns. The study also helped to optimize the selection of the clusters depth of hydraulic fracturing stages in horizontal wells. The poroelastic horizontal strain approach to constrain horizontal stresses from cross dipole sonic provides better variability in the stress profile to ultimately yield high resolution. This model, calibrated with actual frac data, is crucial for stimulation design in complex reservoirs with very low matrix permeability. The geomechanical model serves as one of the few for shallow carbonates rock in the Middle East region and can be of significant importance to many other shallow projects in the region.

Complex Carbonate Reservoir Description Method Based on Seismic Inversion Model

2017 ◽  
Author(s):  
Baohua Chang ◽  
Hedong Sun ◽  
Wen Cao ◽  
Zhiliang Liu ◽  
Shiyin Li ◽  
...  
Keyword(s):  
Seismic Inversion ◽  
Carbonate Reservoir ◽  
Inversion Model ◽  
Reservoir Description
Sign in / Sign up

Export Citation Format

Share Document