The modern seismic survey in the context of multi-client data access: A case study from Sabah, Malaysia

2019 ◽  
Author(s):  
Mazin Farouki ◽  
Jo McArdle ◽  
Andy Bromley ◽  
Shinya Sakamoto
Keyword(s):  
Data Access ◽  
Seismic Survey ◽  
Client Data

Seismic solutions utilizing existing in-mine infrastructure for mineral exploration: A case study from Maseve platinum mine, South Africa

2022 ◽  
Vol 41 (1) ◽  
pp. 54-61
Author(s):  
Moyagabo K. Rapetsoa ◽  
Musa S. D. Manzi ◽  
Mpofana Sihoyiya ◽  
Michael Westgate ◽  
Phumlani Kubeka ◽  
...  
Keyword(s):  
South Africa ◽  
Seismic Data ◽  
Mineral Exploration ◽  
Ground Surface ◽  
Seismic Survey ◽  
Noisy Environment ◽  
Borehole Data ◽  
Passive Seismic ◽  
Below Ground

We demonstrate the application of seismic methods using in-mine infrastructure such as exploration tunnels to image platinum deposits and geologic structures using different acquisition configurations. In 2020, seismic experiments were conducted underground at the Maseve platinum mine in the Bushveld Complex of South Africa. These seismic experiments were part of the Advanced Orebody Knowledge project titled “Developing technologies that will be used to obtain information ahead of the mine face.” In these experiments, we recorded active and passive seismic data using surface nodal arrays and an in-mine seismic land streamer. We focus on analyzing only the in-mine active seismic portion of the survey. The tunnel seismic survey consisted of seven 2D profiles in exploration tunnels, located approximately 550 m below ground surface and a few meters above known platinum deposits. A careful data-processing approach was adopted to enhance high-quality reflections and suppress infrastructure-generated noise. Despite challenges presented by the in-mine noisy environment, we successfully imaged the platinum deposits with the aid of borehole data and geologic models. The results open opportunities to adapt surface-based geophysical instruments to address challenging in-mine environments for mineral exploration.

Time-Lapse Seismic for Reservoir Management: Case Studies From Offshore Niger Delta, Nigeria

2016 ◽  
Vol 19 (03) ◽  
pp. 391-402
Author(s):  
Sunday Amoyedo ◽  
Emmanuel Ekut ◽  
Rasaki Salami ◽  
Liliana Goncalves-Ferreira ◽  
Pascal Desegaulx
Keyword(s):  
Case Studies ◽  
Niger Delta ◽  
Reservoir Management ◽  
Time Lapse ◽  
Seismic Survey ◽  
Elastic Model ◽  
Field Development ◽  
4D Seismic ◽  
The Impact

Summary This paper presents case studies focused on the interpretation and integration of seismic reservoir monitoring from several fields in conventional offshore and deepwater Niger Delta. The fields are characterized by different geological settings and development-maturity stages. We show different applications varying from qualitative to quantitative use of time-lapse (4D) seismic information. In the first case study, which is in shallow water, the field has specific reservoir-development challenges, simple geology, and is in phased development. On this field, 4D seismic, which was acquired several years ago, is characterized by poor seismic repeatability. Nevertheless, we show that because of improvements from seismic reprocessing, 4D seismic makes qualitative contributions to the ongoing field development. In the second case study, the field is characterized by complex geological settings. The 4D seismic is affected by overburden with strong lateral variations in velocity and steeply dipping structure (up to 40°). Prestack-depth-imaging (PSDM) 4D seismic is used in a more-qualitative manner to monitor gas injection, validate the geologic/reservoir models, optimize infill injector placement, and consequently, enhance field-development economics. The third case study presents a deep offshore field characterized by a complex depositional system for some reservoirs. In this example, good 4D-seismic repeatability (sum of source- and receiver-placement differences between surveys, dS+dR) is achieved, leading to an increased quantitative use of 4D monitoring for the assessment of sand/sand communication, mapping of oil/water (OWC) front, pressure evolution, and dynamic calibration of petro-elastic model (PEM), and also as a seismic-based production-logging tool. In addition, 4D seismic is used to update seismic interpretation, provide a better understanding of internal architecture of the reservoirs units, and, thereby, yield a more-robust reservoir model. The 4D seismic in this field is a key tool for field-development optimization and reservoir management. The last case study illustrates the need for seismic-feasibility studies to detect 4D responses related to production. In addition to assessing the impact of the field environment on the 4D- seismic signal, these studies also help in choosing the optimum seismic-survey type, design, and acquisition parameters. These studies would possibly lead to the adoption of new technologies such as broad-band streamer or nodes acquisition in the near future.

scholarly journals Integrating cellular automata and discrete global grid systems: a case study into wildfire modelling

2020 ◽  
Vol 1 ◽  
pp. 1-23
Author(s):  
Majid Hojati ◽  
Colin Robertson
Keyword(s):  
Big Data ◽  
Spatial Analysis ◽  
Cellular Automata ◽  
Spatial Data ◽  
Data Model ◽  
Data Access ◽  
Environmental Modeling ◽  
Modeling Framework ◽  
Global Grid

Abstract. With new forms of digital spatial data driving new applications for monitoring and understanding environmental change, there are growing demands on traditional GIS tools for spatial data storage, management and processing. Discrete Global Grid System (DGGS) are methods to tessellate globe into multiresolution grids, which represent a global spatial fabric capable of storing heterogeneous spatial data, and improved performance in data access, retrieval, and analysis. While DGGS-based GIS may hold potential for next-generation big data GIS platforms, few of studies have tried to implement them as a framework for operational spatial analysis. Cellular Automata (CA) is a classic dynamic modeling framework which has been used with traditional raster data model for various environmental modeling such as wildfire modeling, urban expansion modeling and so on. The main objectives of this paper are to (i) investigate the possibility of using DGGS for running dynamic spatial analysis, (ii) evaluate CA as a generic data model for dynamic phenomena modeling within a DGGS data model and (iii) evaluate an in-database approach for CA modelling. To do so, a case study into wildfire spread modelling is developed. Results demonstrate that using a DGGS data model not only provides the ability to integrate different data sources, but also provides a framework to do spatial analysis without using geometry-based analysis. This results in a simplified architecture and common spatial fabric to support development of a wide array of spatial algorithms. While considerable work remains to be done, CA modelling within a DGGS-based GIS is a robust and flexible modelling framework for big-data GIS analysis in an environmental monitoring context.

Measuring floating ice thickness with optical fibers and DAS, a test case study on a frozen moutain lake.

2021 ◽  
Author(s):  
Olivier Coutant ◽  
Ludovic Moreau ◽  
Pierre Boué ◽  
Eric Larose ◽  
Arnaud Cimolino
Keyword(s):  
Fiber Optics ◽  
Optical Fibers ◽  
Ambient Noise ◽  
Seismic Waves ◽  
Safety Issue ◽  
Seismic Survey ◽  
Ice Thickness ◽  
Test Case ◽  
Monitoring Method

<p>Accurate monitoring of floating ice thickness is an important safety issue for northern countries where lakes, fjords, and coasts are covered with ice in winter, and used by people to travel. For example in Finland, 15-20 fatal accidents occur every year due to ice-related drowning. We have explored the potential of fiber optics to measure the propagation of seismic waves guided in the ice layer, in order to infer its thickness via the inversion of the dispersion curves. An optical fiber was deployed on a frozen lake at Lacs Roberts (2400m) above Grenoble and we measured with a DAS the signal generated by active sources (hammer) and ambient noise. We demonstrate that we can retrieve the ice thickness. This monitoring method could be of interest since the deployment of a fiber on ice is quite simple (e.g. using a drone) compared to other techniques for ice thickness estimation such as seismic survey or manual drilling.</p>

Far-offset detection of normal modes and diving waves: a case study in Valhall, southern North Sea

Geophysics ◽  
2021 ◽  
pp. 1-50
Author(s):  
Filipe Borges ◽  
Martin Landrø
Keyword(s):  
Normal Modes ◽  
Seismic Source ◽  
Velocity Model ◽  
Seismic Survey ◽  
The Past ◽  
Lack Of Control ◽  
Record Data ◽  
Refracted Waves ◽  
1D Velocity Model

The use of permanent arrays for continuous reservoir monitoring has become a reality in the past decades, with Ekofisk and Valhall being its flagships. One of the possibilities when such solution is available is to passively record data while acquisitions with an active source are ongoing in nearby areas. These recordings might contain ultrafar-offset data (over 30 km), which are hardly used in standard reservoir exploration and monitoring, as they are mostly a combination of normal modes, deep reflections and diving waves. We present here data from the Valhall Life of Field Seismic array, recorded while an active seismic survey was being acquired in Ekofisk, in April 2014. Despite the lack of control on source firing time and position, analysis of the data shows that the normal modes are remarkably clear, overcoming the ambient noise in the field. The normal modes can be well explained by a two-layer acoustic model, while a combination of diving waves and refracted waves can be fairly well reproduced with a regional 1D velocity model. We suggest a method to use the far-offset recordings to monitor changes in the shallow sediments between source and receivers, both with and without a coherent seismic source in the area.

Infield Processing for Large Volume Land 3D Seismic Survey - Case Study from Kuwait

2013 ◽  
Author(s):  
W. Zahran ◽  
A. El-Emam ◽  
A. Glushchenko ◽  
P.J. Bilsby ◽  
J. Quigley ◽  
...  
Keyword(s):  
Large Volume ◽  
Seismic Survey ◽  
3D Seismic

Improving Quality and Safety Through Use of Secondary Data: Methods Case Study

2016 ◽  
Vol 39 (11) ◽  
pp. 1477-1501 ◽  
Author(s):  
Victoria Goode ◽  
Nancy Crego ◽  
Michael P. Cary ◽  
Deirdre Thornlow ◽  
Elizabeth Merwin
Keyword(s):  
Research Question ◽  
Secondary Data ◽  
Data Access ◽  
Data Sets ◽  
Complex Data ◽  
Management Skills ◽  
Data Set ◽  
Large Numbers ◽  
Need To Evaluate

Researchers need to evaluate the strengths and weaknesses of data sets to choose a secondary data set to use for a health care study. This research method review informs the reader of the major issues necessary for investigators to consider while incorporating secondary data into their repertoire of potential research designs and shows the range of approaches the investigators may take to answer nursing research questions in a variety of context areas. The researcher requires expertise in locating and judging data sets and in the development of complex data management skills for managing large numbers of records. There are important considerations such as firm knowledge of the research question supported by the conceptual framework and the selection of appropriate databases, which guide the researcher in delineating the unit of analysis. Other more complex issues for researchers to consider when conducting secondary data research methods include data access, management and security, and complex variable construction.

Sign in / Sign up

Export Citation Format

Share Document