Vapor Abatement Cost Analysis Methodology for Calculating Life-Cycle Costs for Hydrocarbon Vapor Extracted During Soil Venting

2018 ◽  
pp. 779-789 ◽  
Author(s):  
Peter M. Kroopnick
Keyword(s):  
Life Cycle ◽  
Cost Analysis ◽  
Abatement Cost ◽  
Life Cycle Costs ◽  
Analysis Methodology ◽  
Soil Venting ◽  
Hydrocarbon Vapor

scholarly journals Least Cost Analysis of Energy Efficiency Upgrades for Ontario Using Trnsys

2021 ◽  
Author(s):  
Amir Fereidouni Kondri
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Cost Analysis ◽  
Energy Efficient ◽  
Life Cycle Cost ◽  
Net Present Value ◽  
Hot Water ◽  
Life Cycle Costs ◽  
Residential Housing ◽  
Domestic Hot Water

This report presents the methodology for determining least cost energy efficient upgrade solutions in new residential housing using brute force sequential search (BFSS) method for integration into the reference house to reduce energy consumption while minimizing the net present value (NPV) of life cycle costs. The results showed that, based on the life cycle cost analysis of 30 years, the optimal upgrades resulted in the average of 19.25% (case 1), 31% (case 2a), and 21% (case 2b) reduction in annual energy consumption. Economic conditions affect the sequencing of the upgrades. In this respect the preferred upgrades to be performed in order are; domestic hot water heating, above grade wall insulation, cooling systems, ceiling insulation, floor insulation, heat recovery ventilator, basement slab insulation and below grade wall insulation. When the gas commodity pricing becomes high, the more energy efficient upgrades for domestic hot water (DHW) get selected at a cost premium.

A Life Cycle Cost Analysis Approach for Selection of a Typical Heavy Usage Multistage Centrifugal Pump

2006 ◽  
Author(s):  
Laxman Y. Waghmode ◽  
Ravindra S. Birajdar ◽  
Shridhar G. Joshi
Keyword(s):  
Life Cycle ◽  
Cost Analysis ◽  
Centrifugal Pump ◽  
Life Cycle Cost ◽  
Lifetime Cost ◽  
Maintenance Cost ◽  
Life Cycle Costs ◽  
Life Cycle Cost Analysis ◽  
Initial Cost ◽  
Multistage Centrifugal Pump

It is well known that the pumps are the largest consumers of industrial motor energy and account for more than 25% of electricity consumption. The life cycle cost of a pump is the total lifetime cost associated with procurement, installation, operation, maintenance and its disposal. For majority of heavy usage pumps, the lifetime energy and/or maintenance cost will dominate the life cycle costs. Hence a greater understanding of all the cost components making up the total life cycle costs should provide an opportunity to achieve a substantial savings in energy and maintenance costs. This will further enable optimizing pumping system efficiency and improving pump and system reliability. Therefore in this context, the life cycle cost analysis of heavy usage pumps is quite important. This paper focuses on an application of a methodology of determining the life cycle cost of a typical heavy usage multistage centrifugal pump. In this case, all the cost components associated with the pump-set have been determined and classified under different categories. The data with regard to initial investment costs, operation costs, maintenance and repair costs and disposal costs for the pump considered for this case study was collected from the concerned pump manufacturer along with the unit cost of each component, quantity used and their weights. By applying the principles of reliability and maintainability engineering and using the data obtained from the design, manufacturing and maintenance departments, the component-wise values of MTBF (Mean Time Between Failures) and MTTR (Mean Time To Repair) were estimated. The results of the life cycle cost analysis of the specimen pump were compared with the life cycle costs of similar pumps reported in the literature. From this comparison of results, it can be concluded that, the initial cost of the pump is the only a fraction of the total life cycle cost. The operating cost of the pump dominates the life cycle costs especially in case of heavy usage pumps. The maintenance cost varies approximately from 0.6 to 2.5 times the initial cost of the pump. The life cycle cost of the pump varies approximately from 12 to 33 times the initial cost of the pump. The operation and maintenance cost is almost 92 to 97 per cent of the life cycle cost. The detailed analysis carried out in this paper is expected to provide guidelines to the pump manufactures/practicing engineers in selecting a heavy usage multistage centrifugal pump based on the total lifetime cost rather than only on initial price.

Life Cycle Cost Analysis of a Novel Cooling and Power Gas Turbine Engine

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Vaibhav Malhotra ◽  
W. E. Lear ◽  
J. R. Khan ◽  
S. A. Sherif
Keyword(s):  
High Pressure ◽  
Life Cycle ◽  
Cost Analysis ◽  
Life Cycle Cost ◽  
Cost Savings ◽  
Life Cycle Costs ◽  
Life Cycle Cost Analysis ◽  
Absorption Refrigeration ◽  
Power Capacity ◽  
Turbine Engine

A life cycle cost analysis was performed to compare life cycle costs of a novel gas turbine engine to those of a conventional microturbine with similar power capacity. This engine, called the high-pressure regenerative turbine engine (HPRTE), operates on a pressurized semiclosed cycle and is integrated with a vapor absorption refrigeration system. The HPRTE uses heat from its exhaust gases to power the absorption refrigeration unit, which cools the high-pressure compressor inlet of the HPRTE to below ambient temperatures and also produces some external refrigeration. The life cycle cost analysis procedure is based on principles laid out in the Federal Energy Management Program. The influence of different design and economic parameters on the life cycle costs of both technologies is analyzed. The results of this analysis are expressed in terms of the cost ratios of the two technologies. The pressurized nature of the HPRTE leads to compact components resulting in significant savings in equipment cost versus those of a microturbine. Revenue obtained from external refrigeration offsets some of the fuel costs for the HPRTE, thus proving to be a major contributor in cost savings for the HPRTE. For the base case of a high-pressure turbine (HPT) inlet temperature of 1373 K and an exit temperature of 1073 K, the HPRTE showed life cycle cost savings of 7% over a microturbine with a similar power capacity.

Probabilistic Characterization of Life-Cycle Agency and User Costs: Case Study of Minnesota

2017 ◽  
Vol 2639 (1) ◽  
pp. 93-101 ◽  
Author(s):  
Mehdi Akbarian ◽  
Omar Swei ◽  
Randolph Kirchain ◽  
Jeremy Gregory
Keyword(s):  
Life Cycle ◽  
Cost Analysis ◽  
Life Cycle Cost ◽  
Life Cycle Costs ◽  
Potential Implication ◽  
User Costs ◽  
Probabilistic Characterization ◽  
The Cost

Life-cycle cost analysis (LCCA) is a commonly used approach by pavement engineers to compare the economic efficiency of alternative pavement design and maintenance strategies. Over the past two decades, the pavement community has augmented the LCCA framework used in practice by explicitly accounting for uncertainty in the decision-making process and incorporating life-cycle costs not only to the agency but also to the users of a facility. This study represents another step toward improving the LCCA process by focusing on methods to characterize the cost of relevant pay items for an LCCA as well as integrating costs accrued to users of a facility caused by pavement–vehicle interaction (PVI) and work zone delays. The developed model was implemented in a case study to quantify the potential implication of both of these components on the outcomes of an LCCA. Results from the construction cost analysis suggest that the proposed approaches in this paper lead to high-fidelity estimates that outperform current practice. Furthermore, results from the case study indicate that PVI can be a dominant contributor to total life-cycle costs and, therefore, should be incorporated in future LCCAs.

scholarly journals Least Cost Analysis of Energy Efficiency Upgrades for Ontario Using Trnsys

2021 ◽  
Author(s):  
Amir Fereidouni Kondri
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Cost Analysis ◽  
Energy Efficient ◽  
Life Cycle Cost ◽  
Net Present Value ◽  
Hot Water ◽  
Life Cycle Costs ◽  
Residential Housing ◽  
Domestic Hot Water

This report presents the methodology for determining least cost energy efficient upgrade solutions in new residential housing using brute force sequential search (BFSS) method for integration into the reference house to reduce energy consumption while minimizing the net present value (NPV) of life cycle costs. The results showed that, based on the life cycle cost analysis of 30 years, the optimal upgrades resulted in the average of 19.25% (case 1), 31% (case 2a), and 21% (case 2b) reduction in annual energy consumption. Economic conditions affect the sequencing of the upgrades. In this respect the preferred upgrades to be performed in order are; domestic hot water heating, above grade wall insulation, cooling systems, ceiling insulation, floor insulation, heat recovery ventilator, basement slab insulation and below grade wall insulation. When the gas commodity pricing becomes high, the more energy efficient upgrades for domestic hot water (DHW) get selected at a cost premium.

Life Cycle Cost Analysis of a Novel Cooling and Power Gas Turbine Engine

2005 ◽  
Author(s):  
Vaibhav Malhotra ◽  
W. E. Lear ◽  
J. R. Khan ◽  
S. A. Sherif
Keyword(s):  
High Pressure ◽  
Life Cycle ◽  
Cost Analysis ◽  
Life Cycle Cost ◽  
Cost Savings ◽  
Life Cycle Costs ◽  
Life Cycle Cost Analysis ◽  
Absorption Refrigeration ◽  
Power Capacity ◽  
Turbine Engine

A Life cycle cost analysis (LCCA) was performed to compare life cycle costs of a novel gas turbine engine to that of a conventional microturbine with similar power capacity. This engine, called the High Pressure Regenerative Turbine Engine (HPRTE) operates on a pressurized semiclosed cycle and is integrated with a Vapor Absorption Refrigeration System (VARS). The HPRTE uses heat from its exhaust gases to power the absorption refrigeration unit which cools the high-pressure compressor inlet of the HPRTE to below ambient temperatures and also produces some external refrigeration. The life cycle cost analysis procedure is based on principles laid out in the Federal Energy Management Program (FEMP). The influence of different design and economic parameters on the life cycle costs of both technologies is analyzed. The results of this analysis are expressed in terms of the cost ratios of the two technologies. The pressurized nature of the HPRTE leads to compact components resulting in significant savings in equipment cost versus those of a microturbine. Revenue obtained from external refrigeration offsets some of the fuel costs for the HPRTE, thus proving to be a major contributor in cost savings for the HPRTE. For the base case of a high-pressure turbine (HPT) inlet temperature of 1373 K and an exit temperature of 1073 K, the HPRTE showed life cycle cost savings of 7% over a microturbine with a similar power capacity.

scholarly journals Life-cycle cost analysis of bridges subjected to fatigue damage

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Stefano Sacconi ◽  
Laura Ierimonti ◽  
Ilaria Venanzi ◽  
Filippo Ubertini
Keyword(s):  
Life Cycle ◽  
Cost Analysis ◽  
Fatigue Damage ◽  
Life Cycle Cost ◽  
Traffic Monitoring ◽  
Traffic Load ◽  
Life Cycle Costs ◽  
Life Cycle Cost Analysis ◽  
Damage Estimation ◽  
Engineering Demand Parameter

AbstractLife-cycle cost analysis (LCCA) is a decision-making tool particularly useful for the design of bridges as it predicts lifetime expenses and supports the inspections management and the maintenance activities. LCCA allows to consider uncertainties on loads, resistances, degradation and on the numerical modelling and structural response analysis. It also permits to consider different limit states and different types of damage in a unified framework. Among the types of damages that can occur to steel and steel-concrete composite bridges, fatigue is one of the most dangerous ones, as it may lead to sudden and fragile rupture, even at operational traffic levels. In this context, the present paper proposes a framework for LCCA based on the use of the Pacific Earthquake Engineering Research (PEER) equation which is for the first time utilized for fragility and cost analysis of bridges subjected to fatigue, highlighting the possibility of treating the problem of fatigue damage estimation with an approach similar to the one currently adopted for damage induced by other hazards, like earthquake and wind. To this aim, a damage index computed through the Palmgren-Miner’s rule is adopted as engineering demand parameter. The framework is applied to a composite steel-reinforced concrete multi-span roadway bridge by evaluating the fatigue limit state from different traffic load models, i.e. a Technical Code-based model and a model based on results of Weigh in Motion monitoring system. The evolution over time of the probability of failure and the life-cycle costs due to fatigue damage induced by heavy traffic loads are investigated for different probability distributions of the engineering demand parameter and for different fragility models. The comparison between the fatigue failure probabilities and the life-cycle costs obtained with the two traffic models, encourages the adoption of traffic monitoring systems for a correct damage estimation.

PADDY RESIDUE AS FEEDSTOCK IN ELECTRICITY GENERATION: REDEMPTION OF LIFE CYCLE EMISSIONS AND COST ANALYSIS

2018 ◽  
Vol 13 (Number 1) ◽  
pp. 55-67
Author(s):  
Shafini M. Shafie ◽  
Zakirah Othman ◽  
N Hami
Keyword(s):  
Power Generation ◽  
Life Cycle ◽  
Cost Analysis ◽  
Positive Feedback ◽  
Energy Supply ◽  
Electricity Generation ◽  
Economic Sector ◽  
Ghg Emission ◽  
Coal Fuel ◽  
Biomass Resources

Malaysia has an abundance of biomass resources that can be utilised for power generation. One of them is paddy residue. Paddy residue creates ahuge potential in the power generation sector. The consumption of paddy residue can help Malaysia become less dependent on conventional sources of energy, mitigate greenhouse gas(GHG) emission, offer positive feedback in the economic sector, and at the same time, provide thebest solution for waste management activities. The forecast datafor 20 years on electricity generation wasused to calculate the GHG emission and its saving when paddy residue is used for electricity generation. The government’scost saving was also identified when paddy residue substituted coal fuel in electricity generation.This paper can provide forecast information so that Malaysia is able to move forward to apply paddy residue as feedstock in energy supply. Hopefully, the data achieved can encourage stakeholder bodies in the implementation of paddy residue inelectricity generation since there is apositive impact towardscost and emission saving.

Sign in / Sign up

Export Citation Format

Share Document