Analysis on the Internal Explosion Effects of Single-Layer Spherical Reticulated Shell

2020 ◽  
pp. 135-144
Author(s):  
Shiqi Fu ◽  
Xuanneng Gao
Keyword(s):  
Single Layer ◽  
Internal Explosion

scholarly journals Study of the Similarities in Scale Models of a Single-Layer Spherical Lattice Shell Structure under the Effect of Internal Explosion

2017 ◽  
Vol 2017 ◽  
pp. 1-13
Author(s):  
Wenbao Wang ◽  
Xuanneng Gao ◽  
Lihui Le
Keyword(s):  
Specific Impulse ◽  
Single Layer ◽  
Original Model ◽  
Scale Model ◽  
Positive Pressure ◽  
Internal Explosion ◽  
Action Time ◽  
Lattice Shell ◽  
Peak Value ◽  
Scaling Coefficient

The similarity of each scale model is verified based on the theory of similarity, deriving the similarity law of internal explosions in a single-layer spherical lattice shell structure via dimensional theory, calculated based on models with scaling coefficients of 1, 0.8, 0.6, 0.4, 0.2, and 0.1. The results show that the shock wave propagation characteristics, the distribution of the overpressure on the inner surface, the maximum dynamic response position, and the position at which the earliest explosion venting occurs are all similar to those of the original model. With the decrease of scaling coefficients, the overpressure peak value of the shock waves of each scale model, and the specific action time of the positive pressure zone, as well as specific impulse are increasingly deviated from the original model values; when the scaling coefficient is 0.1, the maximum relative error between the overpressure peak value at the measurement point and the specific action time of the positive pressure zone as well as the specific impulse and the original model value is 4.9%. Thus, it is feasible to forecast the internal explosion effect of the original structure size model by using the experiment results of the scale model with scaling coefficient λ≥0.1.

scholarly journals Anti-explosion Capability and Impact Response of an Innovative Multi-layered Composite Explosion Containment Vessel

2021 ◽  
Author(s):  
Qi Yuan ◽  
Heng Chen ◽  
Wenbin Gu ◽  
Zhen Wang ◽  
Likai Hao
Keyword(s):  
Shock Wave ◽  
Sandwich Structure ◽  
Steel Plate ◽  
Structural Parameters ◽  
Human Life ◽  
Single Layer ◽  
Experimental Tests ◽  
Element Model ◽  
Containment Vessel ◽  
Internal Explosion

Abstract Owing to its advantages of high strength and low density, composite explosion containment vessel (CECV) can limit the scope of internal explosion shock wave, thereby reducing the damage to the surrounding environment and protecting human life and property. However, due to the complexity of the explosion process and related structure, the mechanism by which shock wave is induced on the inner lining of the explosion containment vessel (ECV) and the influence of the structural parameters of ECV on the reflection overpressure of the inner wall are not understood clearly. In this study, the characteristic of the internal explosion pressure load of a single-layer ECV is examined through experimental tests and simulations, and a three-dimensional mesoscopic model is established and verified. Furthermore, to solve the problem of the restricted explosion resistance of the single-layer ECV, a new steel plate-aluminum honeycomb-fiber cloth sandwich structure with sliding lining is proposed to design a multi-layer CECV. For the arrangement of fiber filaments, uniform distribution, random distribution, and honeycomb distribution algorithms are established based on Python language. Finally, a finite element model of the CECV is established, and a series of explosion simulations are conducted. The results indicate that the laying angle of the fibre cloth has no effect on the peak overpressure inside the ECV, and the ECV exhibits the best protective property when the laying angle of the fibre cloth is 0°/ 45°/ 90°/ 45°/ 0°. It is also observed that the steel plate-aluminium honeycomb-fibre cloth sandwich structure prolongs the action time of the explosion shock wave and greatly reduces the peak pressure in the CECV. Remarkably, for the weakest position of the tank, the strain for the multi-layer CECV under 3000 g TNT is even less than that for the single-layer ECV under 150 g TNT.

Crystalline order to a resolution of 4.7 A in the sheath of Methanospirilium hungatii: A cross-beta structure

1984 ◽  
Vol 42 ◽  
pp. 214-215
Author(s):  
Murray Stewart ◽  
T.J. Beveridge ◽  
D. Sprott
Keyword(s):  
Cell Wall ◽  
Single Layer ◽  
Uranyl Acetate ◽  
Optical Diffraction ◽  
Tube Axis ◽  
Basic Subunit ◽  
Beta Structure ◽  
Diffraction Patterns ◽  
Protein Treatment ◽  
General Appearance

The archaebacterium Methanospirillum hungatii has a sheath as part of its cell wall which is composed mainly of protein. Treatment with dithiothreitol or NaOH released the intact sheaths and electron micrographs of this material negatively stained with uranyl acetate showed flattened hollow tubes, about 0.5 μm diameter and several microns long, in which the patterns from the top and bottom were superimposed. Single layers, derived from broken tubes, were also seen and were more simply analysed. Figure 1 shows the general appearance of a single layer. There was a faint axial periodicity at 28.5 A, which was stronger at irregular multiples of 28.5 A (3 and 4 times were most common), and fine striations were also seen at about 3° to the tube axis. Low angle electron diffraction patterns (not shown) and optical diffraction patterns (Fig. 2) from these layers showed a complex meridian (as a result of the irregular nature of the repeat along the tube axis) which showed a clear maximum at 28.5 A, consistent with the basic subunit spacing.

Differentiation Processes of the Ocellar Retina of the Honeybee (Apis Mellifera L.)

1990 ◽  
Vol 48 (3) ◽  
pp. 430-431
Author(s):  
Maria Anna Pabst
Keyword(s):  
Apis Mellifera ◽  
Distal Part ◽  
Cell Layer ◽  
Single Layer ◽  
Photoreceptor Cells ◽  
Distal Segment ◽  
Compound Eyes ◽  
Thin Sections ◽  
Ultrastructural Studies ◽  
Adult Worker

In addition to the compound eyes, honeybees have three dorsal ocelli on the vertex of the head. Each ocellus has about 800 elongated photoreceptor cells. They are paired and the distal segment of each pair bears densely packed microvilli forming together a platelike fused rhabdom. Beneath a common cuticular lens a single layer of corneagenous cells is present.Ultrastructural studies were made of the retina of praepupae, different pupal stages and adult worker bees by thin sections and freeze-etch preparations. In praepupae the ocellar anlage consists of a conical group of epidermal cells that differentiate to photoreceptor cells, glial cells and corneagenous cells. Some photoreceptor cells are already paired and show disarrayed microvilli with circularly ordered filaments inside. In ocelli of 2-day-old pupae, when a retinogenous and a lentinogenous cell layer can be clearly distinguished, cell membranes of the distal part of two photoreceptor cells begin to interdigitate with each other and so start to form the definitive microvilli. At the beginning the microvilli often occupy the whole width of the developing rhabdom (Fig. 1).

Characterization of a monolayer graphitic structure

1994 ◽  
Vol 52 ◽  
pp. 760-761
Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang
Keyword(s):  
Three Dimensional ◽  
Single Layer ◽  
Synthesis Process ◽  
Graphitic Structure ◽  
Positive Gaussian Curvature ◽  
Graphitic Sheet ◽  
Structural And Electronic Properties ◽  
New Material ◽  
Hexagonal Network

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.

The Continuous Single-Layer Anastomosis in the Gastrointestinal Tract

Swiss Surgery ◽  
2003 ◽  
Vol 9 (3) ◽  
pp. 114-120 ◽  
Author(s):  
Steinke ◽  
Leippold ◽  
Schweizer
Keyword(s):  
Gastrointestinal Tract ◽  
Single Layer

Über die Frage der besten oder "richtigen" Technik bei gastrointestinalen Anastomosen wird seit je diskutiert. Die Ansprüche an eine gute Anastomosentechnik sind: Gute Durchblutung, Wasserdichtigkeit, Spannungsfreiheit, Sicherheit, leichte Durchführbarkeit, wenig Unruhe und Verschmutzung im Operationsgebiet und geringe Kosten. Die Operationstechnik der extramukösen, fortlaufenden Anastomosentechnik im Gastrointestinaltrakt wird in Wort und Bild erläutert. Anhand einer Pilotstudie, einer randomisierten Vergleichsstudie, einer Schweizer Multizenterstudie und schliesslich einer 5-jährigen Qualitätskontrollstudie wird gezeigt, dass diese "Schweizer"-Technik allen Anforderungen zur Durchführung einer "idealen" Anastomose gerecht wird und an fast allen intestinalen Lokalisationen verwendet werden kann.

Technical textiles for protection against Arc-flash fire: Savesplash®

2020 ◽  
pp. 67-78
Author(s):  
Nandan Kumar ◽  
Sainath Shrikant Pawaskar
Keyword(s):  
Attenuation Factor ◽  
Threshold Energy ◽  
Single Layer ◽  
Weather Conditions ◽  
Electric Arc ◽  
Risk Category ◽  
Technical Textiles ◽  
Flash Fire ◽  
Level 3 ◽  
Arc Flash

Flash fire caused by electric arc is different than that caused by flammable liquids/fumes or combustible dusts. A suitable protective clothing for protection against electric arc-flash must be designed as per Indian weather conditions. Currently available garments are manufactured using two or three layers of woven/nonwoven combinations to achieve higher Hazard Risk Category (HRC) rating (level 3 and above). However, they are heavy and not comfortable to the end users. Savesplash® is a single layer inherent flame-retardant knitted fabric. Its arc rating was determined using ASTM standards. It achieved arc thermal performance value (ATPV) of 41 cal/cm2, breakopen threshold energy (E_BT) of 42 cal/cm2 and heat attenuation factor (HAF) of 94% when tested as per ASTM F1959/F1959M-14 which translated into an arc rating of 41 cal/cm2. This is equivalent to HRC level 4 ratings as per National Fire Protection Association’s NFPA 70E standard (USA). Further, cut and sewn gloves (HM-100) developed using Savesplash® fabric reinforced with leather on palm area achieved ATPV of 63 cal/cm2 and HAF of 94.5% when tested as per ASTM F2675/F2675M-13.

Discrete element method to model cracking for two layer systems

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield
Keyword(s):  
Discrete Element Method ◽  
Flexural Modulus ◽  
Single Layer ◽  
Discrete Element ◽  
Flexural Stress ◽  
Layer System ◽  
Three Point Bending ◽  
Moving Force ◽  
Coating Layers ◽  
Element Method

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.

Sign in / Sign up

Export Citation Format

Share Document