Microbiologically Induced Corrosion Associated with the Wet Storage of Subsea Pipelines (Wet Parking)

Author(s):  
Laura L. Machuca
2009 ◽  
Author(s):  
Hejian Sun ◽  
David J. Blumer ◽  
Mike Swidzinski ◽  
Josh Davis

Author(s):  
Elmir I. Huseynli ◽  
◽  
Ramiz A. Eminov ◽  
Arzu E. Ibrahimova ◽  
◽  
...  

Author(s):  
Wenwen Shen ◽  
Terry Griffiths ◽  
Mengmeng Xu ◽  
Jeremy Leggoe

For well over a decade it has been widely recognised that existing models and tools for subsea pipeline stability design fail to account for the fact that seabed soils tend to become mobile well before the onset of pipeline instability. Despite ample evidence obtained from both laboratory and field observations that sediment mobility has a key role to play in understanding pipeline/soil interaction, no models have been presented previously which account for the tripartite interaction between the fluid and the pipe, the fluid and the soil, and the pipe and the soil. There are numerous well developed and widely used theories available to model pipe-fluid and pipe-soil interactions. A challenge lies in the way to develop a satisfactory fluid-soil interaction algorithm that has the potential for broad implementation under both ambient and extreme sea conditions due to the complexity of flow in the vicinity of a seabed pipeline or cable. A widely used relationship by Shields [1] links the bedload and suspended sediment transport to the seabed shear stresses. This paper presents details of computational fluid dynamics (CFD) research which has been undertaken to investigate the variation of seabed shear stresses around subsea pipelines as a parametric function of pipeline spanning/embedment, trench configuration and wave/current properties using the commercial RANS-based software ANSYS Fluent. The modelling work has been undertaken for a wide range of seabed geometries, including cases in 3D to evaluate the effects of finite span length, span depth and flow attack angle on shear stresses. These seabed shear stresses have been analysed and used as the basis for predicting sediment transport within the Pipe-Soil-Fluid (PSF) Interaction Model [2] in determining the suspended sediment concentration and the advection velocity in the vicinity of pipelines. The model has significant potential to be of use to operators who struggle with conventional stabilisation techniques for the pipelines, such as those which cross Australia’s North West Shelf, where shallow water depths, highly variable calcareous soils and extreme metocean conditions driven by frequent tropical cyclones result in the requirement for expensive and logistically challenging secondary stabilisation measures.


2021 ◽  
Vol 111 ◽  
pp. 102637
Author(s):  
Zhan-Feng Chen ◽  
Wen Wang ◽  
He Yang ◽  
Sun-Ting Yan ◽  
Zhi-Jiang Jin

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1100
Author(s):  
Alexandre M. Emelyanenko ◽  
Valery V. Kaminsky ◽  
Ivan S. Pytskii ◽  
Kirill A. Emelyanenko ◽  
Alexander G. Domantovsky ◽  
...  

The interest in magnesium-based materials is promoted by their biocompatibility, their bioresorbability, and their recently discovered antibacterial potential. Until now, the widespread use of magnesium alloys in different corrosive environments was inhibited by their weakly controllable degradation rate and poorly understood microbiologically induced corrosion behavior. To better understand the degradation and usability of magnesium-based alloys, in this study we have fabricated superhydrophobic coatings on a magnesium-based alloy, and analyzed the behavior of this alloy in bacterial dispersions of Pseudomonas aeruginosa and Klebsiella pneumoniae cells in phosphate-buffered saline. It was shown that the immersion of such coatings in bacterial dispersions causes notable changes in the morphology of the samples, dependent on the bacterial dispersion composition and the type of bacterial strain. The interaction of the superhydrophobic coatings with the bacterial dispersion caused the formation of biofilms and sodium polyphosphate films, which provided enhanced barrier properties in magnesium dissolution and hence in dispersion medium alkalization, eventually leading to the inhibition of magnesium substrate degradation. The electrochemical data obtained for superhydrophobic samples in continuous contact with corrosive bacterial dispersions for 48 h indicated a high level of anticorrosion protection.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thomas Harter ◽  
Ingo Bernt ◽  
Stefanie Winkler ◽  
Ulrich Hirn

AbstractScientific publications and newsfeeds recently focused on flushable wet wipes and their role in sewage system blockages. It is stated that although products are marked as flushable, they do not disintegrate after being disposed of via the toilet. In this work it is shown that wetlaid hydroentangled wet wipes lose their initially good dispersive properties during their storage in wet condition. As a consequence, we are suggesting to add tests after defined times of wet storage when assessing the flushability of wet wipes. Loss of dispersibility is found for both, wet wipes from industrial production and wipes produced on pilot facilities. We found it quite surprising that the wet wipes’ dispersibility is deteriorating after storage in exactly the same liquid they are dispersed in, i.e. water. This is probably why the effect of wet storage has not been investigated earlier. It is demonstrated that the deteriorating dispersibility of these wipes is linked to the used type of short cellulosic fibres — only wipes containing unbleached softwood pulp as short fibre component were preserving good dispersibility during wet storage. Possible mechanisms that might be responsible are discussed, e.g. long term fiber swelling causing a tightening of the fiber network, or surface interdiffusion.


2013 ◽  
Vol 295-298 ◽  
pp. 198-201 ◽  
Author(s):  
Bing Sun ◽  
Li Bao ◽  
Yu Xin Liu

In this paper, the bagasse was wet stored by hypochlorite bleaching waste water with or without chlorine. The dissolution ability of lignin, total sugar and reducing sugar was investigated. Then the effluent properties with the wet storage time prolonging were tested. The results showed that some small molecular weight substances were dissolved from baggase, such as sugar and lignin. And the dissolution ability of hypochlorite bleaching waste water with chlorine was better than that of hypochlorite bleaching waste water without chlorine. And the change trend of effluent properties for the two wet storage system were similar. With the wet storage time extending, the dissolved substances were degraded, COD and chroma of effluent were decreased, and the properties of effluent were improved.


2021 ◽  
Vol 116 ◽  
pp. 102863
Author(s):  
Zhenkui Wang ◽  
Yougang Tang ◽  
Nuo Duan

Sign in / Sign up

Export Citation Format

Share Document