Solvent change co-precipitation with hydroxypropyl methylcellulose phthalate to improve dissolution characteristics of a poorly water-soluble drug

2002 ◽  
Vol 54 (8) ◽  
pp. 1041-1047 ◽  
Author(s):  
Gabriel Sertsou ◽  
James Butler ◽  
John Hempenstall ◽  
Thomas Rades
Keyword(s):  
Hydroxypropyl Methylcellulose ◽  
Water Soluble ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Co Precipitation ◽  
Hydroxypropyl Methylcellulose Phthalate ◽  
Poorly Water Soluble Drug

Physical Stabilizing Effect of Biopolymers on Solid Dispersions Containing Indomethacin and Polyethylene Glycol

2012 ◽  
Vol 506 ◽  
pp. 307-310 ◽  
Author(s):  
Benchawan Chamsai ◽  
Pornsak Sriamornsak
Keyword(s):  
Polyethylene Glycol ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Hydroxypropyl Methylcellulose ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Water Soluble Drug ◽  
Stabilizing Effect ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

Solid dispersions of poorly water-soluble drug, indomethacin (IMC), and carriers at a ratio of 1:9 were prepared by melting method. The carriers used in this study were polyethylene glycol 4000 (PEG4000), hydroxypropyl methylcellulose (HPMC) and pectin. The solid dispersions obtained were characterized by powder x-ray diffractometry (PXRD) and dissolution studies. PXRD patterns showed that all solid dispersions led to amorphous products while their physical mixture still showed the crystalline state of drug. Crystalline drug was clearly detectable in solid dispersion products containing only IMC and PEG4000 after storage for 2 months. The formulations with biopolymer (i.e., HPMC, pectin or their combination) showed no drug crystal after storage. More than 80% of IMC dissolved within 5 minutes for all formulations after preparation while less than 40% of IMC dissolved, within 5 minutes, from the formulations containing IMC, PEG4000 and HPMC after storage for 2 months. The slower drug dissolution may be due to the gel-forming properties of HPMC as well as the agglomeration of the products after storage. The results suggested that either HPMC or pectin in solid dispersions can help to prevent the crystallization of amorphous IMC in solid dispersion, probably by a polymer anti-plasticizing effect. Pectin showed superior stabilizing effect with no retardation effect on drug dissolution.

Film-Forming Nanogels: Effects of Nanocarriers and Film-Forming Gel on the Sustained Release of Curcumin

2020 ◽  
Vol 20 ◽  
Author(s):  
Khanh T. Nguyen ◽  
Phuong H.L. Tran ◽  
Hai V. Ngo ◽  
Thao T.D. Tran
Keyword(s):  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Dosage Forms ◽  
Free Drug ◽  
Water Soluble ◽  
Hydrophobic Drug ◽  
Water Soluble Drug ◽  
Film Forming ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

Background: Although film-forming hydrogels possess the advantages of both film and hydrogel dosage forms, certain limitations still remain. Objective: This study aims to investigate the use of film-forming hydrogels and the effects of nanocarriers on the sustained release of a poorly water-soluble drug, curcumin. Methods: The film-forming hydrogels contained either zein or polyvinylpyrrolidone as a film former, in addition to hydroxypropyl methylcellulose, oleic acid, ethanol and water. Curcumin was encapsulated in poly(lactic-co-glycolic acid) and gelatine nanoparticles using a sonoprecipitation method. Free drug and drug-loaded nanoparticles were later dispersed into blank hydrogels to produce the film-forming nanogels. Results: The results suggested that the encapsulation of curcumin in nanoparticles could reduce the drug particle size to less than 200nm for easier diffusion and could shield curcumin from chemical interactions that limit its topical permeability. curcumin was more compatible with gelatine nanoparticles than with poly(lactic-coglycolic acid) nanoparticles, and gelatine nanoparticles, in turn, were more compatible with zein than with polyvinylpyrrolidone film-forming nanogels. Therefore, gelatine nanoparticles in zein filmforming nanogels greatly elevated the permeability of curcumin by over five times that afforded by gelatine nanoparticles in polyvinylpyrrolidone film-forming nanogels. Conclusion: This research suggested that film-forming nanogel is a promising drug delivery system for both improved permeability and sustained topical diffusion of the extremely hydrophobic drug curcumin depending on the compatibility between the nanocarrier and the film-forming hydrogel.

NANO-SIZED SOLID DISPERSION OF A POORLY WATER-SOLUBLE DRUG

2012 ◽  
pp. 31-35
Author(s):  
Truong Dinh Thao Tran ◽  
Ha Lien Phuong Tran ◽  
Nghia Khanh Tran ◽  
Van Toi Vo
Keyword(s):  
Drug Release ◽  
Droplet Size ◽  
Solid Dispersion ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Dissolution Enhancement ◽  
Particle Size Reduction ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

Purposes: Aims of this study are dissolution enhancement of a poorly water-soluble drug by nano-sized solid dispersion and investigation of machenism of drug release from the solid dispersion. A drug for osteoporosis treatment was used as the model drug in the study. Methods: melting method was used to prepare the solid dispersion. Drug dissolution rate was investigated at pH 1.2 and pH 6.8. Drug crystallinity was studied using differential scanning calorimetric and powder X-ray diffraction. In addition, droplet size and contact angle of drug were determined to elucidate mechanism of drug release. Results: Drug dissolution from the solid dispersion was significantly increased at pH 1.2 and pH 6.8 as compared to pure drug. Drug crystallinity was changed to partially amorphous. Also dissolution enhancement of drug was due to the improved wettability. The droplet size of drug was in the scale of nano-size when solid dispersion was dispersed in dissolution media. Conclusions: nano-sized solid dispersion in this research was a successful preparation to enhance bioavailability of a poorly water-soluble drug by mechanisms of crystal changes, particle size reduction and increase of wet property.

Enhancement of Solubility and Dissolution Rate of Poorly Water Soluble Drug using Cosolvency and Solid Dispersion Techniques

1970 ◽  
Vol 1 (4) ◽  
pp. 349-356
Author(s):  
Meka Lingam ◽  
Vobalaboina Venkateswarlu
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physicochemical Characterization ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

The low aqueous solubility of celecoxib (CB) and thus its low bioavailability is a problem.    Thus, it is suggested to improve the solubility using cosolvency and solid dispersions techniques. Pure CB has solubility of 6.26±0.23µg/ml in water but increased solubility of CB was observed with increasing concentration of cosolvents like PEG 400, ethanol and propylene glycol. Highest solubility (791.06±15.57mg/ml) was observed with cosolvency technique containing the mixture of composition 10:80:10%v/v of water: PEG 400: ethanol. SDs with different polymers like PVP, PEG were prepared and subjected to physicochemical characterization using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), solubility and dissolution studies. These studies reveals that CB exists mainly in amorphous form in prepared solid dispersions of PVP, PEG4000 and PEG6000 further it can also be confirmed by solubility and dissolution rate studies. Solid dispersions of PV5 and PV9 have shown highest saturation solubility and dissolution rate

scholarly journals In vivo evaluation of modified gum karaya as a carrier for improving the oral bioavailability of a poorly water-soluble drug, nimodipine

2002 ◽  
Vol 3 (2) ◽  
pp. 55-63 ◽  
Author(s):  
Gedela V. Murali Mohan Babu ◽  
Namballa R. Kumar ◽  
Kasina H. Sankar ◽  
Battu J. Ram ◽  
Namburu K. Kumar ◽  
...  
Keyword(s):  
Oral Bioavailability ◽  
Water Soluble ◽  
In Vivo Evaluation ◽  
Gum Karaya ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

scholarly journals 3D Printing of Dapagliflozin Containing Self-Nanoemulsifying Tablets: Formulation Design and In Vitro Characterization

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 993
Author(s):  
Mohammed S. Algahtani ◽  
Abdul Aleem Mohammed ◽  
Javed Ahmad ◽  
M. M. Abdullah ◽  
Ehab Saleh
Keyword(s):  
3D Printing ◽  
Solid Phase ◽  
Immediate Release ◽  
Water Soluble ◽  
Solid Matrix ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
3D Printing Technique ◽  
Poorly Water Soluble Drug

The 3D printing techniques have been explored extensively in recent years for pharmaceutical manufacturing and drug delivery applications. The current investigation aims to explore 3D printing for the design and development of a nanomedicine-based oral solid dosage form of a poorly water-soluble drug. A self-nanoemulsifying tablet formulation of dapagliflozin propanediol monohydrate was developed utilizing the semisolid pressure-assisted microsyringe (PAM) extrusion-based 3D printing technique. The developed formulation system consists of two major components (liquid and solid phase), which include oils (caproyl 90, octanoic acid) and co-surfactant (PEG 400) as liquid phase while surfactant (poloxamer 188) and solid matrix (PEG 6000) as solid-phase excipients that ultimately self-nanoemulsify as a drug encapsulated nanoemulsion system on contact with aqueous phase/gastrointestinal fluid. The droplet size distribution of the generated nanoemulsion from a self-nanoemulsifying 3D printed tablet was observed to be 104.7 ± 3.36 nm with polydispersity index 0.063 ± 0.024. The FT-IR analysis of the printed tablet revealed that no drug-excipients interactions were observed. The DSC and X-RD analysis of the printed tablet revealed that the loaded drug is molecularly dispersed in the crystal lattice of the tablet solid matrix and remains solubilized in the liquid phase of the printed tablet. SEM image of the drug-loaded self-nanoemulsifying tablets revealed that dapagliflozin propanediol monohydrate was completely encapsulated in the solid matrix of the printed tablet, which was further confirmed by SEM-EDS analysis. The in vitro dissolution profile of dapagliflozin-loaded self-nanoemulsifying tablet revealed an immediate-release drug profile for all three sizes (8 mm, 10 mm, and 12 mm) tablets, exhibiting >75.0% drug release within 20 min. Thus, this study has emphasized the capability of the PAM-based 3D printing technique to print a self-nanoemulsifying tablet dosage form with an immediate-release drug profile for poorly water-soluble drug.

Sign in / Sign up

Export Citation Format

Share Document