scholarly journals Comparison of Standard and Enhanced Pulse Oximeter Auditory Displays of Oxygen Saturation

2019 ◽  
Vol 129 (4) ◽  
pp. 997-1004 ◽  
Author(s):  
Estrella Paterson ◽  
Penelope M. Sanderson ◽  
Birgit Brecknell ◽  
Neil A. B. Paterson ◽  
Robert G. Loeb
Keyword(s):  
Oxygen Saturation ◽  
Pulse Oximeter ◽  
Auditory Displays

IoT Based Pulse Oximeter

2021 ◽  
Vol 9 (8) ◽  
pp. 2946-2951
Author(s):  
G Sidhartha
Keyword(s):  
Heart Rate ◽  
Signal Processing ◽  
Oxygen Saturation ◽  
Data Transmission ◽  
Pulse Oximeter ◽  
Mobile Application ◽  
Preventive Measures ◽  
Vital Signs ◽  
Home Treatment ◽  
Portable Devices

Abstract: In recent times, we have realized the importance of vital signs such as Oxygen saturation and heart rate i.e beats per minute (BPM) due to the covid-19 situation worldwide. SpO2 and BPM are being used as preliminary indicators for testing a person’s health, the drop in the oxygen saturation is perceived as one of the symptoms of a person suffering from coronavirus. Oximeters are portable devices that are used to measure the SpO2 and BPM of a person. Timely measurements of oxygen saturation can aid in taking preventive measures. This paper discusses the construction and development of an IoT-based pulse oximeter that is capable of transmitting the reading obtained to any remote location wirelessly. The proposed system uses Arduino as the microcontroller which is used for signal processing and Esp-01 as the Wifi platform to enable remote data transmission. The data is communicated remotely through Blynk mobile application. This project is aimed at reducing the manual effort undergone in regularly updating the oxygen saturation to the doctor, in the case of a person undergoing home treatment. Though an oximeter is not a screening te st, it is a primary indicator of a person’s health. Keywords: Heart rate, SpO2, IoT, Arduino, BLYNK server, Red, IR.

scholarly journals Effect of At-Home Bleaching on Oxygen Saturation Levels in the Dental Pulp of Maxillary Central Incisors

2018 ◽  
Vol 29 (6) ◽  
pp. 541-546 ◽  
Author(s):  
Caroline Solda ◽  
Fernando Branco Barletta ◽  
José Roberto Vanni ◽  
Paula Lambert ◽  
Marcus Vinícius Reis Só ◽  
...  
Keyword(s):  
Oxygen Saturation ◽  
Pulse Oximeter ◽  
Dental Pulp ◽  
Generalized Estimating Equations ◽  
Carbamide Peroxide ◽  
Baseline Levels ◽  
Student’S T ◽  
Bleaching Treatment ◽  
Student’S T Test ◽  
At Home

Abstract The present study assessed oxygen saturation (SaO2) levels before, during, and after at-home bleaching treatment in the pulps of healthy maxillary central incisors. SaO2 levels were measured in 136 healthy maxillary central incisors using a pulse oximeter. The bleaching protocol consisted of 10% carbamide peroxide gel placed in individual trays and used for four hours daily for 14 days. SaO2 levels were assessed before bleaching (T0), immediately after the first session (T1), on the 7th day of treatment (T2), on the 15th day (the day following the last session) (T3), and 30 days after completion of the bleaching protocol (T4). Data were statistically analyzed using generalized estimating equations (GEE), Student’s t test (p<0.05) and Pearson’s correlation. Mean pulp SaO2 levels were 85.1% at T0, 84.9% at T1, 84.7% at T2, 84.3% at T3, and 85.0% at T4. Gradual reductions in SaO2 levels were observed, with significant differences (p<0.001) during the course of home bleaching treatment. However, 30 days after the end of the bleaching protocol, SaO2 levels returned to baseline levels. Home bleaching caused a reversible transient decrease in SaO2 levels in the pulps.

scholarly journals Automatic Oxygen Delivery System for Premature Babies

2010 ◽  
Vol 4 (2) ◽  
Author(s):  
Thao P. Do ◽  
Lindsey J. Eubank ◽  
Devin S. Coulter ◽  
John M. Freihaut ◽  
Carlos E. Guevara ◽  
...  
Keyword(s):  
Oxygen Saturation ◽  
Oxygen Concentration ◽  
Delivery System ◽  
Pulse Oximeter ◽  
Oxygen Delivery ◽  
Supplemental Oxygen ◽  
Saturation Level ◽  
Blood Oxygen ◽  
Blood Oxygen Saturation ◽  
Oxygen Saturation Level

When an infant is born prematurely, there are a number of health risks. Among these are underdeveloped lungs, which can lead to abnormal gas exchange of oxygen or hypoxemia. Hypoxemia is treated through oxygen therapy, which involves the delivery of supplemental oxygen to the patient but there are risks associated with this method. Risks include retinopathy, which can cause eye damage when oxygen concentration is too high, and brain damage, when the concentration is too low [1]. Supplemental oxygen concentration must be controlled rigorously. Currently healthcare staff monitors infants’ blood oxygen saturation level using a pulse oximeter. They manually adjust the oxygen concentration using an air-oxygen blender. Inconsistent manual adjustments can produce excessive fluctuations and cause the actual oxygen saturation level to deviate from the target value. Precision and accuracy are compromised. This project develops an automatic oxygen delivery system that regulates the supplemental oxygen concentration to obtain a target blood oxygen saturation level. A microprocessor uses a LABVIEW® program to analyze pulse oximeter and analyzer readings and control electronic valves in a redesigned air-oxygen blender. A user panel receives a target saturation level, displays patient data, and signals alarms when necessary. The prototype construction and testing began February 2010.

scholarly journals Effects of Divided Attention and Operating Room Noise on Perception of Pulse Oximeter Pitch Changes

2013 ◽  
Vol 118 (2) ◽  
pp. 376-381 ◽  
Author(s):  
Ryan A. Stevenson ◽  
Joseph J. Schlesinger ◽  
Mark T. Wallace
Keyword(s):  
Oxygen Saturation ◽  
Operating Room ◽  
Divided Attention ◽  
Pulse Oximeter ◽  
Background Noise ◽  
Arterial Oxygen ◽  
Auditory Information ◽  
Auditory Display ◽  
Attentional Load ◽  
The Impact

Abstract Background: Anesthesiology requires performing visually oriented procedures while monitoring auditory information about a patient’s vital signs. A concern in operating room environments is the amount of competing information and the effects that divided attention has on patient monitoring, such as detecting auditory changes in arterial oxygen saturation via pulse oximetry. Methods: The authors measured the impact of visual attentional load and auditory background noise on the ability of anesthesia residents to monitor the pulse oximeter auditory display in a laboratory setting. Accuracies and response times were recorded reflecting anesthesiologists’ abilities to detect changes in oxygen saturation across three levels of visual attention in quiet and with noise. Results: Results show that visual attentional load substantially affects the ability to detect changes in oxygen saturation concentrations conveyed by auditory cues signaling 99 and 98% saturation. These effects are compounded by auditory noise, up to a 17% decline in performance. These deficits are seen in the ability to accurately detect a change in oxygen saturation and in speed of response. Conclusions: Most anesthesia accidents are initiated by small errors that cascade into serious events. Lack of monitor vigilance and inattention are two of the more commonly cited factors. Reducing such errors is thus a priority for improving patient safety. Specifically, efforts to reduce distractors and decrease background noise should be considered during induction and emergence, periods of especially high risk, when anesthesiologists has to attend to many tasks and are thus susceptible to error.

Measurement of Carboxyhemoglobin and Methemoglobin by Pulse Oximetry

2006 ◽  
Vol 105 (5) ◽  
pp. 892-897 ◽  
Author(s):  
Steven J. Barker ◽  
Jeremy Curry ◽  
Daniel Redford ◽  
Scott Morgan
Keyword(s):  
Carbon Monoxide ◽  
Oxygen Saturation ◽  
Pulse Oximetry ◽  
Sodium Nitrite ◽  
Pulse Oximeter ◽  
Hemoglobin Oxygen Saturation ◽  
Arterial Blood ◽  
Human Volunteers ◽  
Oxygenation Monitoring ◽  
Intravenous Sodium

Background A new eight-wavelength pulse oximeter is designed to measure methemoglobin and carboxyhemoglobin, in addition to the usual measurements of hemoglobin oxygen saturation and pulse rate. This study examines this device's ability to measure dyshemoglobins in human volunteers in whom controlled levels of methemoglobin and carboxyhemoglobin are induced. Methods Ten volunteers breathed 500 ppm carbon monoxide until their carboxyhemoglobin levels reached 15%, and 10 different volunteers received intravenous sodium nitrite, 300 mg, to induce methemoglobin. All were instrumented with arterial cannulas and six Masimo Rad-57 (Masimo Inc., Irvine, CA) pulse oximeter sensors. Arterial blood was analyzed by three laboratory CO-oximeters, and the resulting carboxyhemoglobin and methemoglobin measurements were compared with the corresponding pulse oximeter readings. Results The Rad-57 measured carboxyhemoglobin with an uncertainty of +/-2% within the range of 0-15%, and it measured methemoglobin with an uncertainty of 0.5% within the range of 0-12%. Conclusion The Masimo Rad-57 is the first commercially available pulse oximeter that can measure methemoglobin and carboxyhemoglobin, and it therefore represents an expansion of our oxygenation monitoring capability.

Sign in / Sign up

Export Citation Format

Share Document