Fire Safety Evaluation of High-Pressure Ammonia Storage Systems

Ammonia combustion is a promising energy source as a carbon free fuel without greenhouse gas emissions. However, since the auto-ignition temperature is 651 degrees Celsius and the range of flammability limit is not wide compared to other fuels, fundamental studies on ammonia fires have rarely been conducted so far. Therefore, this study aims to numerically estimate fire spread characteristics when ammonia fuel in a high-pressure state leaks to the outside, especially focusing on the flammability limit according to oxygen concentration. Three kinds of reaction mechanism for numerical analysis were adopted to compare the flame structure, flammability limit, and combustion characteristics. Plank-mean absorption coefficients of nitrogen species were taken for the radiation model, in addition to the optically thin model. The effect of radiation heat loss could be identified from the maximum flame temperature trend at a low strain rate. It was confirmed that the pyrolysis of ammonia in the preheated zone results in hydrogen production, and the generated hydrogen contributes to heat release rate in the flame zone. It is found that the contribution of hydrogen would be an important role in the flammability limit of ammonia combustion. Finally, Karlovitz and Peclet numbers showed well the extinction behaviors of ammonia combustion as a result of LOC (Limit Oxygen Concentration) analysis as a function of global strain rate.

Mechanism of Neonatal Intestinal Injury Induced by Hyperoxia Therapy

High concentration oxygen is widely used in the treatment of neonates, which has a significant effect on improving blood oxygen concentration in neonates with respiratory distress. The adverse effects of hyperoxia therapy on the lung, retina, and neurodevelopment of newborns have been extensively studied, but less attention has been paid to intestinal damage caused by hyperoxia therapy. In this review, we focus on the physical, immune, and microorganism barriers of the intestinal tract and discuss neonatal intestinal tract damage caused by hyperoxia therapy and analyze the molecular mechanism of intestinal damage caused by hyperoxia in combination with necrotizing enterocolitis.

Risk of airway fire with the use of KTP laser and high flow humidified oxygen delivery in a laryngeal surgery model

Airway surgery presents a unique environment for operating room fire to occur. This study aims to explore the factors of combustion when using KTP laser with high flow oxygen in an ex-vivo model. The variables tested were varying tissue type, tissue condition, oxygen concentration, laser setting, and smoke evacuation in a stainless-steel model. Outcome measures were time of lasing to the first spark and/or flame. A multivariate Cox proportional hazard model was used to determine the risk of spark and flame across the different risk factors. For every 10% increase in oxygen concentration above 60% the risk of flame increased by a factor of 2.3. Continuous laser setting at 2.6 W increased the risk by a factor of 72.8. The risk of lasing adipose tissue is 7.3 times higher than that of muscle. Charred tissue increases the risk of flame by a factor of 92.8. Flame occurred without a preceding spark 93.6% of the time. Using KTP laser in the pulsed mode with low wattages, minimising lasing time, reducing the oxygen concentration and avoiding lasing adipose or charred tissue produce a relatively low estimated risk of spark or flame.

Calculation of Intake Oxygen Concentration through Intake CO2 Measurement and Evaluation of Its Effect on Nitrogen Oxide Prediction Accuracy in a Heavy-Duty Diesel Engine

A new procedure, based on measurement of intake CO2 concentration and ambient humidity was developed and assessed in this study for different diesel engines in order to evaluate the oxygen concentration in the intake manifold. Steady-state and transient datasets were used for this purpose. The method is very fast to implement since it does not require any tuning procedure and it involves just one engine-related input quantity. Moreover, its accuracy is very high since it was found that the absolute error between the measured and predicted intake O2 levels is in the ±0.15% range. The method was applied to verify the performance of a previously developed NOx model under transient operating conditions. This model had previously been adopted by the authors during the IMPERIUM H2020 EU project to set up a model-based controller for a heavy-duty diesel engine. The performance of the NOx model was evaluated considering two cases in which the intake O2 concentration is either derived from engine-control unit sub-models or from the newly developed method. It was found that a significant improvement in NOx model accuracy is obtained in the latter case, and this allowed the previously developed NOx model to be further validated under transient operating conditions.

Problem of maintaining a normal condensate dissolved oxygen concentration

Study presents the results of the steam surface KCS-200-2 reconstruction. In order to maintain the dissolved oxygen concentration, according to the Code of Operation for Power Plants, the steam sparger was installed in condenser hotwell. Despite the abnormal air leakage level, reducing of dissolved oxygen concentration was reached. The dissolved oxygen concentration reduced, on average, by 2 times. As it was expected, in the cases of low inlet cooling water temperature, the final oxygen concentration did not reach the normal level. In last 3 tests the dissolved oxygen concentration was reduced to 19 mg /l. The results show a possibility of described reconstruction experience.