scholarly journals A combined efficient design for biomarker data subject to a limit of detection due to measuring instrument sensitivity

2011 ◽  
Vol 5 (4) ◽  
pp. 2651-2667 ◽  
Author(s):  
Enrique F. Schisterman ◽  
Albert Vexler ◽  
Aijun Ye ◽  
Neil J. Perkins
2011 ◽  
Vol 31 (22) ◽  
pp. 2473-2484 ◽  
Author(s):  
Z. Zhang ◽  
A. Liu ◽  
R.H. Lyles ◽  
B. Mukherjee

1977 ◽  
Author(s):  
Raymond W. Kulhavy ◽  
Richard F. Schmid ◽  
Raymond S. Dean

Metrologiya ◽  
2020 ◽  
pp. 16-24
Author(s):  
Alexandr D. Chikmarev

A single program has been developed to ensure that the final result of the data processing of the measurement calibration protocol is obtained under normal conditions. The calibration result contains a calibration function or a correction function in the form of a continuous sedate series and a calibration chart based on typical additive error probabilities. Solved the problem of the statistical treatment of the calibration protocol measuring in normal conditions within a single program “MMI–calibration 3.0” that includes identification of the calibration function in a continuous power series of indications of a measuring instrument and chart calibration. An example of solving the problem of calibration of the thermometer by the working standard of the 3rd grade with the help of the “MMI-calibration 3.0” program.


2020 ◽  
pp. 35-42
Author(s):  
Yuri P. Zarichnyak ◽  
Vyacheslav P. Khodunkov

The analysis of a new class of measuring instrument for heat quantities based on the use of multi-valued measures of heat conductivity of solids. For example, measuring thermal conductivity of solids shown the fallacy of the proposed approach and the illegality of the use of the principle of ambiguity to intensive thermal quantities. As a proof of the error of the approach, the relations for the thermal conductivities of the component elements of a heat pump that implements a multi-valued measure of thermal conductivity are given, and the limiting cases are considered. In two ways, it is established that the thermal conductivity of the specified measure does not depend on the value of the supplied heat flow. It is shown that the declared accuracy of the thermal conductivity measurement method does not correspond to the actual achievable accuracy values and the standard for the unit of surface heat flux density GET 172-2016. The estimation of the currently achievable accuracy of measuring the thermal conductivity of solids is given. The directions of further research and possible solutions to the problem are given.


2019 ◽  
Vol 27 (2) ◽  
pp. 190-206
Author(s):  
Surawan Setya Budi S

This research use relationship marketing teory which applied 4 factor of input process understanding customer expectations, building service partnerships, empowiring employers, and total quality management, and output relationship marketing process: customer satisfaction and customer layalty. The objective of this research is to find out wich factors of input process that has more impact on the output process in relationship marketing. There are 60 trusted correspondencea from Grand Inna Malioboro Hotel customer whom at least have been stayed at the hotel three times. The method of collecting data in these research use questioners and Likert scale measuring instrument 5 points that will be tested by the instrument and analyzed by using regressision analysi the simultaneous test of variabel for the relationship marketing input s. The result of the instrument shows the items used are valid and reliable. It displays the outpout process passed the assumtions test, while the signifikacant relationship marketingto the output of relationtionship marketing, For the passive test of vareable input process relationship marketing with the ouput process relationship marketing shows all significant variables unless vareabel understands customer expectations does not have a significant effect on the process of output relationship marketing


Sign in / Sign up

Export Citation Format

Share Document