Polarization pattern of freshwater habitats recorded by video polarimetry in red, green and blue spectral ranges and its relevance for water detection by aquatic insects

1997 ◽  
Vol 200 (7) ◽  
pp. 1155-1163 ◽  
Author(s):  
G Horváth ◽  
D Varjú

The reflection-polarization patterns of small freshwater habitats under clear skies can be recorded by video polarimetry in the red, green and blue ranges of the spectrum. In this paper, the simple technique of rotating-analyzer video polarimetry is described and its advantages and disadvantages are discussed. It is shown that the polarization patterns of small water bodies are very variable in the different spectral ranges depending on the illumination conditions. Under clear skies and in the visible range of the spectrum, flat water surfaces reflecting light from the sky are most strongly polarized in the blue range. Under an overcast sky radiating diffuse white light, small freshwater habitats are characterized by a high level of horizontal polarization at or near the Brewster angle in all spectral ranges except that in which the contribution of subsurface reflection is large. In a given spectral range and at a given angle of view, the direction of polarization is horizontal if the light mirrored from the surface dominates and vertical if the light returning from the subsurface regions dominates. The greater the degree of dominance, the higher the net degree of polarization, the theoretical maximum value being 100 % at the Brewster angle for the horizontal E-vector component and approximately 30 % at flat viewing angles for the vertical E-vector component. We have made video polarimetric measurements of differently coloured fruits and vegetables to demonstrate that polarized light in nature follows this general rule. The consequences of the reflection-polarization patterns of small bodies of water for water detection by polarization-sensitive aquatic insects are discussed.

2013 ◽  
Vol 13 (4) ◽  
pp. 365-367 ◽  
Author(s):  
Marciel Elio Rodrigues ◽  
Cesar Carriço ◽  
Zeneida Teixeira Pinto ◽  
Paloma Martins Mendonça ◽  
Margareth Maria de Carvalho Queiroz

Water mites are common and widespread parasites of some aquatic insects in freshwater habitats. This is the first record of acari Arrenurus Dugès, 1834, as a parasite of Odonata in Brazil. Water mites were sampled from Miathyria marcella (Selys, 1857) and Ischnura fluviatilis (Selys, 1876).


Botany ◽  
2019 ◽  
Vol 97 (10) ◽  
pp. 537-545
Author(s):  
D.B. Strongman ◽  
M.M. White

Trichomycetes are fungi and protists living in the guts of arthropods. Herbivorous insects in freshwater habitats commonly house these microbes, and there are over 300 species described. One very common group of aquatic insects occurring in most freshwater systems is caddisflies, belonging to the Order Trichoptera. Although these are potentially good hosts for trichomycetes, there has been little published on trichomycetes in this host and none have been described from caddisflies. We collected and dissected caddisfly larvae from multiple sites in Canada from 2001 to 2018 and describe five new species of trichomycetes from trichopteran larvae. Data are presented on the prevalence and seasonal variation of trichomycetes in caddisfly larvae at one site in Nova Scotia where multi-year collections were made.


2012 ◽  
Vol 5 (2) ◽  
pp. 164-166 ◽  
Author(s):  
Adolfo Ricardo Calor ◽  
Rodolfo Mariano

A simple, inexpensive light trap is described for collecting night-flying insects. The components for constructing the light trap are described and the advantages and disadvantages for collecting different taxa of aquatic insects are discussed. Armadilha Luminosa para Coleta de Insetos Aquáticos Resumo. Armadilha luminosa simples e de baixo custo é apresentada para coleta de insetos noturnos. Os componentes necessários para a construção da armadilha luminosa são descritos, assim como suas vantagens e desvantagens são discutidas.


PeerJ ◽  
2017 ◽  
Vol 5 ◽  
pp. e2851 ◽  
Author(s):  
Blanca Ríos-Touma ◽  
Ralph W. Holzenthal ◽  
Jolanda Huisman ◽  
Robin Thomson ◽  
Ernesto Rázuri-Gonzales

BackgroundAquatic insects and other freshwater animals are some of the most threatened forms of life on Earth. Caddisflies (Trichoptera) are highly biodiverse in the Neotropics and occupy a wide variety of freshwater habitats. In Andean countries, including Ecuador, knowledge of the aquatic biota is limited, and there is a great need for baseline data on the species found in these countries. Here we present the first list of Trichoptera known from Ecuador, a country that harbors two global biodiversity “hotspots.”MethodsWe conducted a literature review of species previously reported from Ecuador and supplemented these data with material we collected during five recent field inventories from about 40 localities spanning both hotspots. Using species presence data for each Ecuadorian province, we calculated the CHAO 2 species estimator to obtain the minimum species richness for the country.ResultsWe recorded 310 species, including 48 new records from our own field inventories for the country. CHAO 2 calculations showed that only 54% of the species have been found. Hydroptilidae and Hydropsychidae were the most species rich families. We report the family Xiphocentronidae for the first time from Ecuador as well as several new records of genera from different families.DiscussionAs in the neighboring Andean countries of Colombia and Peru, it is common to find undescribed species of caddisflies. There are vast areas of Ecuador and the northern Andes that are completely unexplored, and we expect that hundreds of new species are yet to be discovered.


Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 131 ◽  
Author(s):  
Jing Tian ◽  
Heng Yao ◽  
Maxime Cavillon ◽  
Enric Garcia-Caurel ◽  
Razvigor Ossikovski ◽  
...  

This paper compares anisotropic linear optical properties (linear birefringence, linear dichroism, degree of polarization) and performances (absorption coefficient, thermal stability) of two types of birefringent waveplates fabricated in silica glass by femtosecond laser direct writing. The first type of waveplate is based on birefringence induced by self-organized nanogratings imprinted in the glass. One the other hand, the second design is based on birefringence originating from the stress-field formed around the aforementioned nanogratings. In addition to the provided comparison, the manufacturing of stress-engineered half waveplates in the UV-Visible range, and with mm-size clear aperture and negligible excess losses, is reported. Such results contrast with waveplates made of nanogratings, as the later exhibit significantly higher scattering losses and depolarization effects in the UV-Visible range.


2020 ◽  
Vol 1 (2) ◽  
pp. 82-87
Author(s):  
Aleksey A. Kolesnikov ◽  
Elena V. Komissarova ◽  
Ivan V. Zhdanov

Currently, data volumes are growing exponentially. Geospatial data is one of the main elements of the concept of Big data. There is a very large number of tools for analyzing Big data, but not all of them take into account the features and have the ability to process geospatial data. The article discusses three popular open analytical tools Hadoop Spatial, GeoSpark, GeoFlink for working with geospatial data of very large volumes. Their architectures, advantages and disadvantages, depending on the execution time and the amount of data used are considered. Processing evaluations were also performed in terms of both streaming and packet data. The experiments were carried out on raster and vector data sets, which are satellite imagery in the visible range, NDVI and NDWI indices, climate indicators (snow cover, precipitation intensity, surface temperature), data from the Open Street Map in the Novosibirsk and Irkutsk Regions.


2020 ◽  
Vol 24 (3) ◽  
pp. 121-136
Author(s):  
I. E. Cherneckaya ◽  
S. V. Spevakova ◽  
D. V. Primenko

Purpose of research. In modern automatic information collection systems, autonomous mobile devices are increasingly used, data from which can be obtained in conditions hazardous to human health, from geographically remote places, in difficult meteorological conditions and in round-the-clock observation mode. For the autonomous operation of such devices, it is necessary to use methods and algorithms that allow you to build a map of the area, link a mobile platform to it, determine a route to a target point, highlight obstacles along the route and correct the route taking into account detected obstacles. Methods. The article proposes a method and an algorithm for the selection of dynamic objects from a mobile platform, based on the analysis of data obtained from a multispectral camera, which allows the selection of obstacles, such as water, plant origin, technogenic nature, etc. with reduced computational complexity. To improve the accuracy of determining the coordinates of detected objects, a laser rangefinder is used. Results. We consider the well-known methods of multispectral images recognition and present their comparative analysis. A method and an algorithm for recognition dynamic objects from a mobile platform, from images obtained in different spectral ranges and lidar data are proposed. Experimental studies were carried out to confirm the adequacy of the mathematical substantiation of the method, to reduce the error in calculating the coordinates of the object, at a distance of up to 100 meters to the object, RMSE - 0.447%, MAPE - 0.397, to increase the performance, it took 0, 04 seconds to select the object and determine its coordinates. Conclusion. The article analyzes modern methods for recognizing multispectral images, presents the principles on which each method is based, gives advantages and disadvantages. The authors have developed a method and an algorithm that make it possible to identify static and dynamic obstacles along the route of a mobile platform, based on a sequence of images obtained in different spectral ranges. In the course of experimental studies, the performance of the proposed solutions and compliance with the specified requirements for accuracy and reliability were confirmed.


Sign in / Sign up

Export Citation Format

Share Document