A Novel Three-Dimensional Cyano-Linked Metal-Complex Host Clathrate [{Cd(imH)}{Cd(CN)3(imH)}{Cd(CN)3}]·C6H6(imH = imidazole): X-Ray Single Crystal Structure and Solid State113Cd and2H NMR

1996 ◽  
Vol 25 (1) ◽  
pp. 89-90 ◽  
Author(s):  
Chong-Hyeak Kim ◽  
Takayoshi Soma ◽  
Shin-ichi Nishikiori ◽  
Toschitake Iwamoto
Keyword(s):  
Crystal Structure ◽  
Metal Complex ◽  
Single Crystal ◽  
Three Dimensional ◽  
Single Crystal Structure ◽  
X Ray

A Three-Dimensional Silver(I) Framework Assembled from Nitrilotriacetate

2005 ◽  
Vol 58 (2) ◽  
pp. 115 ◽  
Author(s):  
Chun-Long Chen ◽  
Qian Zhang ◽  
Ji-Jun Jiang ◽  
Qin Wang ◽  
Cheng-Yong Su
Keyword(s):  
Crystal Structure ◽  
Ir Spectroscopy ◽  
Coordination Polymer ◽  
Single Crystal ◽  
Elemental Analysis ◽  
Three Dimensional ◽  
Single Crystal Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Coordination Numbers

The reaction of AgCF3CO2 with nitrilotriacetate (NTA) yields the three-dimensional silver(i) coordination polymer {Ag3[N(CH2COO)3]}n 1 which was characterized by means of elemental analysis and IR spectroscopy as well as X-ray diffraction. The single crystal structure shows that the NTA3– anions act as unusual heptadentate 13-coordination agents and the silver(i) atoms exhibit various coordination numbers in the range 3–6.

scholarly journals An investigation of polyhedral deformation in two mixed-metal diarsenates: SrZnAs2O7and BaCuAs2O7

2015 ◽  
Vol 71 (4) ◽  
pp. 330-337 ◽  
Author(s):  
Sabina Kovač ◽  
Ljiljana Karanović ◽  
Tamara Đorđević
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
General Formula ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Open Framework ◽  
Geometrical Characteristics ◽  
Barium Copper

Two isostructural diarsenates, SrZnAs2O7(strontium zinc diarsenate), (I), and BaCuAs2O7[barium copper(II) diarsenate], (II), have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. The three-dimensional open-framework crystal structure consists of corner-sharingM2O5(M2 = Zn or Cu) square pyramids and diarsenate (As2O7) groups. Each As2O7group shares its five corners with five differentM2O5square pyramids. The resulting framework delimits two types of tunnels aligned parallel to the [010] and [100] directions where the large divalent nine-coordinatedM1 (M1 = Sr or Ba) cations are located. The geometrical characteristics of theM1O9,M2O5and As2O7groups of known isostructural diarsenates, adopting the general formulaM1IIM2IIAs2O7(M1II= Sr, Ba, Pb;M2II= Mg, Co, Cu, Zn) and crystallizing in the space groupP21/n, are presented and discussed.

Cobalt(II) complexes of the antibiotic sulfadiazine, the X-ray single crystal structure of [Co(C10H9N4O2S)2(CH3OH)2]

2006 ◽  
Vol 359 (10) ◽  
pp. 3111-3116 ◽  
Author(s):  
Peter A. Ajibade ◽  
Gabriel A. Kolawole ◽  
Paul O’Brien ◽  
Madeleine Helliwell ◽  
James Raftery
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Single Crystal Structure ◽  
X Ray

scholarly journals X-Ray Single Crystal Structural Analysis of Magnetically Oriented Microcrystals

2014 ◽  
Vol 70 (a1) ◽  
pp. C1138-C1138
Author(s):  
Chiaki Tsuboi ◽  
Kazuki Aburaya ◽  
Shingo Higuchi ◽  
Fumiko Kimura ◽  
Masataka Maeyama ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Crystal Structure ◽  
Single Crystal ◽  
Three Dimensional ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Data Set ◽  
Uv Curable ◽  
X Ray

We have developed magnetically oriented microcrystal array (MOMA) technique that enables single crystal X-ray diffraction analyses from microcrystalline powder. In this method, microcrystals suspended in a UV-curable monomer matrix are there-dimensionally aligned by special rotating magnetic field, followed by consolidation of the matrix by photopolymerization. From thus achieved MOMAs, we have been succeeded in crystal structure analysis for some substances [1, 2]. Though MOMA method is an effective technique, it has some problems as follows: in a MOMA, the alignment is deteriorated during the consolidation process. In addition, the sample microcrystals cannot be recovered from a MOMA. To overcome these problems, we performed an in-situ X-ray diffraction measurement using a three-dimensional magnetically oriented microcrystal suspension (3D MOMS) of L-alanine. An experimental setting of the in-situ X-ray measurement of MOMS is schematically shown in the figure. L-alanine microcrystal suspension was poured into a glass capillary and placed on the rotating unit equipped with a pair of neodymium magnets. Rotating X-ray chopper with 10°-slits was placed between the collimator and the suspension. By using this chopper, it was possible to expose the X-ray only when the rotating MOMS makes a specific direction with respect to the impinging X-ray. This has the same effect as the omega oscillation in conventional single crystal measurement. A total of 22 XRD images of 10° increments from 0° to 220° were obtained. The data set was processed by using conventional software to obtain three-dimensional molecular structure of L-alanine. The structure is in good agreement with that reported for the single crystal. R1 and wR2 were 6.53 and 17.4 %, respectively. RMSD value between the determined molecular structure and the reported one was 0.0045 Å. From this result, we conclude that this method can be effective and practical to be used widely for crystal structure analyses.

scholarly journals Recommended X-ray single-crystal structure refinement and Rietveld refinement procedure for tremolite

2021 ◽  
Vol 77 (4) ◽  
Author(s):  
Paolo Ballirano ◽  
Beatrice Celata ◽  
Alessandro Pacella ◽  
Ferdinando Bosi
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Rietveld Refinement ◽  
Structure Refinement ◽  
Point Of View ◽  
Single Crystal Structure ◽  
Crystal Structure Refinement ◽  
Statistical Point ◽  
X Ray ◽  
Refinement Procedure

A detailed description of the structure of the amphibole-supergroup minerals is very challenging owing to their complex chemical composition that renders the process of cation partition extremely difficult, particularly because of the occurrence of multivalent elements. Since amphiboles naturally occur under a fibrous morphology and have largely been used to produce asbestos, there is a growing demand for detailed and accurate structural data in order to study the relationships between structure, composition and toxicity. The present study proposes a recommended refinement procedure for both X-ray single-crystal structure refinement (SREF) and Rietveld analysis for tremolite, selected as a test case. The corresponding structural results are compared to estimate the `degree of confidence' of the Rietveld refinement with regard to SREF. In particular, it is shown that the interpretation of the electron density of the tremolite structure by SREF is model dependent. By assuming that the site-scattering values from SREF should be as close as possible to those from electron microprobe analysis, as a crucial constraint for the correct description of the final crystal-chemical model, it is found that it is best satisfied by using partially ionized scattering curves (SCs) for O and Si, and neutral SCs (neutral oxygen curves or NOCs) for other atoms. This combination leads to the best fit to the diffraction data. Moreover, it is found that Rietveld refinement using NOCs produces the best structural results, in excellent agreement with SREF. It is worth noting that, due to the complexity of the diffraction pattern and the fairly large number of freely refinable parameters, refinements with different combinations of SCs produce results almost indistinguishable from a statistical point of view, albeit showing significant differences from a structural point of view.

Sign in / Sign up

Export Citation Format

Share Document