scholarly journals Comparison between Different Keratin-composed Biosorbents for the Removal of Heavy Metal Ions from Aqueous Solutions

2002 ◽  
Vol 20 (4) ◽  
pp. 393-416 ◽  
Author(s):  
Fawzi Banat ◽  
Sameer Al-Asheh ◽  
Dheaya‘ Al-Rousan
Keyword(s):  
Aqueous Solutions ◽  
Human Hair ◽  
Metal Ion ◽  
Ph Value ◽  
Freundlich Isotherm ◽  
Operating Conditions ◽  
Ion Uptake ◽  
Chicken Feathers ◽  
Initial Ph ◽  
Metal Ion Uptake

This study examined and compared the ability of chicken feathers, human hair and animal horns, as keratin-composed biosorbents, for the removal of Zn2+ and Cu2+ ions from single metal ion aqueous solutions under different operating conditions. The three biosorbents investigated in this study were all capable of adsorbing Zn2+ and Cu2+ ions from aqueous solutions. The biosorbent showing the highest uptake of Zn2+ and Cu2+ ions was animal horns. Chicken feathers showed a higher Cu2+ ion uptake and a lower Zn2+ ion compared to human hair. Increasing the initial concentration of Zn2+ or Cu2+ ions, or increasing the initial pH value, increased the metal ion uptake. Such uptake decreased when the temperature was raised from 25°C to 50°C for all adsorbent/metal ion combinations except for Zn2+ ion/human hair where the uptake increased with temperature. It was demonstrated that the addition of NaCl salt to the metal ion solution depressed the metal ion uptake. The Freundlich isotherm model was found to be applicable to the adsorption data for Cu2+ and Zn2+ ions.

Removal of Pb(II), Zn(II), Sn(II) and Cu(II) Ions from Aqueous Solutions by Linear Alternating Poly(4,4'-biphenol oxalate) Oligomer

2020 ◽  
Vol 15 (2) ◽  
pp. 73-85
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Ph Value ◽  
Equilibrium Concentration ◽  
Ion Uptake ◽  
Uptake Capacity ◽  
Concentration Data ◽  
Hno3 Solution ◽  
Metal Ion Uptake

Poly(4,4′-biphenol oxalate) oligomer was synthesized and characterized by FT-IR, elemental analysis XRD and thermal analysis. The capability of the oligomer to take away Pb(II), Zn(II), Sn(II) and Cu(II) metal ions from aqueous solutions was considered by the known batch and column techniques in terms of concentration, pH value, contact time and temperature. The results indicated that a high initial rate of metal-ion uptake by the oligomer was observed throughout the first 30 minutes, which enlarged slightly amid rising the pH value and then reached its greatest value at pH=5.00 for Pb(II) and Zn(II), pH=4.00 for Cu(II) and pH=6.00 for Sn(II). The oligomer exhibited a high metal-ion uptake capacity to Pb(II) and Zn(II), but a little metal-ion uptake capacity to Cu(II) and Sn(II). Linearized forms of the Langmuir, Freundlich and Dubinin–Radushkevich adsorption isotherms were used to investigate the experimental equilibrium concentration data of Pb(II), Zn(II), Cu(II) and Sn(II). ΔG values demonstrated that the adsorption process of these metal ions on the oligomer is favored while the ΔH values indicated that this process is endothermic. On the other hand, the entropy of the process is positive. In addition to batch experiments, column experiments were performed, where the metal ions were efficiently recovered by treatment of the metal-loaded oligomer with 1.0 M HNO3, 1.0 M HCl and 0.5 M EDTA. The best results were obtained with 1.0 M HNO3 solution.

scholarly journals The Removal of Methylene Blue Dye from Aqueous Solutions Using Activated and Non-Activated Bentonites

2003 ◽  
Vol 21 (5) ◽  
pp. 451-462 ◽  
Author(s):  
Sameer Al-Asheh ◽  
Fawzi Banat ◽  
Leena Abu-Aitah
Keyword(s):  
Methylene Blue ◽  
Ph Value ◽  
Sodium Dodecyl ◽  
Freundlich Isotherm ◽  
Blue Dye ◽  
Batch Adsorption ◽  
Ionic Surfactant ◽  
Methylene Blue Dye ◽  
X Ray Diffraction ◽  
Initial Ph

An improvement in the adsorption capacity of naturally available bentonite towards water pollutants such as Methylene Blue dye (MBD) is certainly needed. For this purpose, sodium bentonite was activated by two methods: (1) treatment with sodium dodecyl sulphate (SDS) as an ionic surfactant and (2) thermal treatment in an oven operated at 850°C. Batch adsorption tests were carried out on removing MBD from aqueous solution using the above-mentioned bentonites. It was found that the effectiveness of bentonites towards MBD removal was in the following order: thermal-bentonite > SDS-bentonite > natural bentonite. X-Ray diffraction analysis showed that an increase in the microscopic bentonite platelets on treatment with SDS was the reason behind the higher uptake of MBD. An increase in sorbent concentration or initial pH value of the solutions resulted in a greater removal of MBD from the solution. An increase in temperature led to an increase in MBD uptake by the bentonites studied in this work. The Freundlich isotherm model was employed and found to represent the experimental data well.

Properties of the mammalian and yeast metal-ion transporters DCT1 and Smf1p expressed in Xenopus laevis oocytes

2001 ◽  
Vol 204 (6) ◽  
pp. 1053-1061 ◽  
Author(s):  
A. Sacher ◽  
A. Cohen ◽  
N. Nelson
Keyword(s):  
Xenopus Laevis ◽  
Metal Ions ◽  
Metal Ion ◽  
Divalent Cations ◽  
Ion Uptake ◽  
Xenopus Laevis Oocytes ◽  
Ion Transporters ◽  
Divalent Metal Ions ◽  
Transport Pathway ◽  
Metal Ion Uptake

Transition metals are essential for many metabolic processes, and their homeostasis is crucial for life. Metal-ion transporters play a major role in maintaining the correct concentrations of the various metal ions in living cells. Little is known about the transport mechanism of metal ions by eukaryotic cells. Some insight has been gained from studies of the mammalian transporter DCT1 and the yeast transporter Smf1p by following the uptake of various metal ions and from electrophysiological experiments using Xenopus laevis oocytes injected with RNA copies (c-RNA) of the genes for these transporters. Both transporters catalyze the proton-dependent uptake of divalent cations accompanied by a ‘slippage’ phenomenon of different monovalent cations unique to each transporter. Here, we further characterize the transport activity of DCT1 and Smf1p, their substrate specificity and their transport properties. We observed that Zn(2+) is not transported through the membrane of Xenopus laevis oocytes by either transporter, even though it inhibits the transport of the other metal ions and enables protons to ‘slip’ through the DCT1 transporter. A special construct (Smf1p-s) was made to enhance Smf1p activity in oocytes to enable electrophysiological studies of Smf1p-s-expressing cells. 54Mn(2+) uptake by Smf1p-s was measured at various holding potentials. In the absence of Na(+) and at pH 5.5, metal-ion uptake was not affected by changes in negative holding potentials. Elevating the pH of the medium to 6.5 caused metal-ion uptake to be influenced by the holding potential: ion uptake increased when the potential was lowered. Na(+) inhibited metal-ion uptake in accordance with the elevation of the holding potential. A novel clutch mechanism of ion slippage that operates via continuously variable stoichiometry between the driving-force pathway (H(+)) and the transport pathway (divalent metal ions) is proposed. The possible physiological advantages of proton slippage through DCT1 and of Na(+) slippage through Smf1p are discussed.

Property of Cu2O-CuO/ZSM-5 nanocomposite and degradation process of azo dye AO7 without sacrificial agent (H2O2)

2016 ◽  
Vol 73 (11) ◽  
pp. 2747-2753 ◽  
Author(s):  
Wusong Kong ◽  
Hongxia Qu ◽  
Peng Chen ◽  
Weihua Ma ◽  
Huifang Xie
Keyword(s):  
Catalytic Activity ◽  
Aqueous Solutions ◽  
Photoelectron Spectroscopy ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Surface Element ◽  
Impregnation Method ◽  
X Ray ◽  
Initial Ph ◽  
Sacrificial Agent

In this study, Cu2O-CuO/ZSM-5 nanocomposite was synthesized by the impregnation method, and its catalytic performance for the destruction of AO7 in aqueous solutions was investigated. The morphology, structure and surface element valence state of Cu2O-CuO/ZSM-5 were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The operating conditions on the degradation of AO7 by Cu2O-CuO/ZSM-5, such as initial pH values, concentration of AO7 and catalyst dosage were investigated and optimized. The results showed that the sample had good catalytic activity for destruction of AO7 in the absence of a sacrificial agent (e.g. H2O2): it could degrade 91% AO7 in 140 min at 25 °C and was not restricted by the initial pH of the AO7 aqueous solutions. Cu2O-CuO/ZSM-5 exhibited stable catalytic activity with little loss after three successive runs. The total organic carbon and chemical oxygen demand removal efficiencies increased rapidly to 69.36% and 67.3% after 120 min of treatment by Cu2O-CuO/ZSM-5, respectively.

Sign in / Sign up

Export Citation Format

Share Document