Repeatability of Non-autonomous Self-Healing with Thermoplastic Healing Agent in Fiber Reinforced Thermoset Composite

2018 ◽  
Author(s):  
BODIUZZAMAN JONY ◽  
MISHAL THAPA ◽  
SAMEER MULANI ◽  
SAMIT ROY
Keyword(s):  
Self Healing ◽  
Fiber Reinforced ◽  
Healing Agent

Advanced Fiber Reinforced Self-Healing Ceramics for Middle Range Temperature

2019 ◽  
Vol 810 ◽  
pp. 119-124
Author(s):  
Wataru Nakao ◽  
Taira Hayakawa ◽  
Tesuro Yanaseko ◽  
Shingo Ozaki
Keyword(s):  
Low Temperature ◽  
Turbine Blade ◽  
The Self ◽  
Self Healing ◽  
Fiber Reinforced ◽  
Low Pressure Turbine ◽  
Middle Range ◽  
The Matrix ◽  
Healing Agent ◽  
Technical Issues

The availability of TiC healing agent has been evaluated in low temperature self-healing behavior of Al2O3 based self-healing ceramics. For this purpose, some technical issues to actualize the advanced fiber-reinforced self-healing ceramics containing TiC based interlayer as healing agent were discussed. Especially, the mechanical matching between the matrix and the interlayer was focused. Moreover, the self-healing behavior of the advanced shFRC containing the optimized TiC based healing agent was investigated. As a result, 30 vol% TiC-70 vol% Al2O3 interlayer was confirmed to be the optimized healing agent in the self-healing ceramics, and the self-healing ceramics was found to enable to attain the perfect healing at 600°C within 10 min. And we succeeded in prototype production of fiber-reinforced self-healing ceramics for low pressure turbine blade.

The self-healing investigations on fiber-reinforced polymer composites through a novel compartmented microcapillary approach

2021 ◽  
pp. 096739112098574
Author(s):  
Deepak Jain ◽  
Aviral Gupta ◽  
Sumit Mahajan
Keyword(s):  
Polymer Composites ◽  
Fiber Reinforced Polymer ◽  
Self Healing ◽  
Fiber Reinforced ◽  
Frp Composites ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites ◽  
Potential Applications ◽  
Healing Agent ◽  
Flexural Tests

This paper presents the experimental self-healing investigations on fiber-reinforced polymer (FRP) composites using a novel in-situ healing approach. During the preparation of polymer composites, the monomer Dicyclopentadiene (DCPD) was embedded as the healing agent. The compartment hollow glass microcapillaries were used to serve the localized distribution of the healing agent. To determine the viability of the proposed microcapillary approach, several flexural tests were conducted to initiate the damage and subsequent realization of self-repair activity. The healing was initiated through the polymerization of DCPD in the presence of Grubb’s catalyst (first and second generation). Once healed, the specimens were tested cyclically to evaluate the recovery of flexural strength. A post-failure healing efficiency as high as 72% has been observed. SEM and XRD investigations have been conducted for the microstructural investigations. These investigations support the potential applications of the proposed concept of embedding the bulk with the microcapillaries.

Development of Novel Self-Healing Polymer Composites for Use in Wind Turbine Blades

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Arun Kumar Koralagundi Matt ◽  
Shawn Strong ◽  
Tarek ElGammal ◽  
Ryoichi S. Amano
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Vascular Network ◽  
Fiber Reinforced Polymer ◽  
Elastic Behavior ◽  
Self Healing ◽  
Fiber Reinforced ◽  
Wind Turbine Blades ◽  
Reinforced Polymer ◽  
Healing Agent

Wind turbine blades undergo fatigue and their performance depletes as time progresses due to the formation of internal cracks. Self-healing in polymers is a unique characteristic used to heal the cracks inherently as they form. In this study, a new method is demonstrated for supplying the monomer (that is quintessential for the healing process) uniformly throughout a fiber reinforced polymer composite. Commercial tubes were used to produce a vascular network for increased accessibility of the healing agent. The tube layouts were varied and their effect on the composite structure was observed. Conventional glass fiber reinforced polymer matrix composites (PMC) without microtubing were tested using dynamic mechanical analysis (DMA) to study the flexural visco–elastic behavior. The vascular network arrangement coupled with DMA data can be used to uniformly supply appropriate amount of healing agent to implement Self-healing in fiber reinforced PMC.

Mechanical responses of microencapsulated self-healing cementitious composites under compressive loading based on a micromechanical damage-healing model

2021 ◽  
pp. 105678952110112
Author(s):  
Kaihang Han ◽  
Jiann-Wen Woody Ju ◽  
Yinghui Zhu ◽  
Hao Zhang ◽  
Tien-Shu Chang ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Micromechanical Model ◽  
Cementitious Composites ◽  
Self Healing ◽  
Damage Degree ◽  
Healing Efficiency ◽  
The Matrix ◽  
Healing Agent ◽  
Damage Healing

The cementitious composites with microencapsulated healing agents have become a class of hotspots in the field of construction materials, and they have very broad application prospects and research values. The in-depth study on multi-scale mechanical behaviors of microencapsulated self-healing cementitious composites is critical to quantitatively account for the mechanical response during the damage-healing process. This paper proposes a three-dimensional evolutionary micromechanical model to quantitatively explain the self-healing effects of microencapsulated healing agents on the damage induced by microcracks. By virtue of the proposed 3 D micromechanical model, the evolutionary domains of microcrack growth (DMG) and corresponding compliances of the initial, extended and repaired phases are obtained. Moreover, the elaborate studies are conducted to inspect the effects of various system parameters involving the healing efficiency, fracture toughness and preloading-induced damage degrees on the compliances and stress-strain relations. The results indicate that relatively significant healing efficiency, preloading-induced damage degree and the fracture toughness of polymerized healing agent with the matrix will lead to a higher compressive strength and stiffness. However, the specimen will break owing to the nucleated microcracks rather than the repaired kinked microcracks. Further, excessive higher values of healing efficiency, preloading-induced damage degree and the fracture toughness of polymerized healing agent with the matrix will not affect the compressive strength of the cementitious composites. Therefore, a stronger matrix is required. To achieve the desired healing effects, the specific parameters of both the matrix and microcapsules should be selected prudently.

Numerical investigation into effect of self-healing composite microcapsules thickness and diameter on their failure strength

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Raj Kumar Pittala ◽  
Satish Ben B. ◽  
Syam Kumar Chokka ◽  
Niranjan Prasad
Keyword(s):  
Matrix Composite ◽  
Polymer Matrix ◽  
Shell Thickness ◽  
Polymer Matrix Composite ◽  
Thickness Effect ◽  
Failure Strength ◽  
Self Healing ◽  
Content Type ◽  
Reinforced Polymer ◽  
Healing Agent

Purpose Microcapsule-embedded autonomic healing materials have the ability to repair microcracks when they come into contact with the crack by releasing the healing agent. The microcapsules with specific shape and thickness effect in releasing healing agent to the cracked surfaces. Thus, the purpose of this paper is to know the load bearing capacity of the self-healing microcapsules and the stresses developed in the material. Design/methodology/approach In the present study, self-healing microcapsule is modelled and integrated with the polymer matrix composite. The aim of the present study is to investigate failure criteria of Poly (methyl methacrylate) microcapsules by varying the shell thickness, capsule diameter and loading conditions. The strength of the capsule is evaluated by keeping the shell thickness as constant and varying the capsule diameter. Uniformly distributed pressure loads were applied on the capsule-reinforced polymer matrix composite to assess the failure strength of capsules and composite. Findings It is observed from the results that the load required to break the capsules is increasing with the increase in capsule diameter. The failure strength of microcapsule with 100 µm diameter and 5 µm thickness is observed as 255 MPa. For an applied load range of 40–160 N/mm2 on the capsules embedded composite, the maximum stress developed in the capsules is observed as 308 MPa. Originality/value Failure strengths of microcapsules and stresses developed in the microcapsule-reinforced polymer composites were evaluated.

scholarly journals Reversible Assembly of Terpyridine Incorporated Norbornene-Based Polymer via a Ring-Opening Metathesis Polymerization and Its Self-Healing Property

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1173 ◽  
Author(s):  
Jookyeong Lee ◽  
Hwi Moon ◽  
Keewook Paeng ◽  
Changsik Song
Keyword(s):  
Ring Opening ◽  
Transition Metal Ions ◽  
Self Healing ◽  
Ring Opening Metathesis Polymerization ◽  
Metathesis Polymerization ◽  
Ligand Interactions ◽  
Healing Agent ◽  
Healing Property ◽  
External Stimuli ◽  
Metal Ligand

We induced a terpyridine moiety into a norbornene-based polymer to demonstrate its self-healing property, without an external stimulus, such as light, heat, or healing agent, using metal–ligand interactions. We synthesized terpyridine incorporated norbornene-based polymers using a ring-opening metathesis polymerization. The sol state of diluted polymer solutions was converted into supramolecular assembled gels, through the addition of transition metal ions (Ni2+, Co2+, Fe2+, and Zn2+). In particular, a supramolecular complex gel with Zn2+, which is a metal with a lower binding affinity, demonstrated fast self-healing properties, without any additional external stimuli, and its mechanical properties were completely recovered.

Sign in / Sign up

Export Citation Format

Share Document