scholarly journals Growth and seed yield of Asalio (Lepidium sativum L.) as influenced by seed rates and sowing methods

2017 ◽  
Vol 5 (3) ◽  
pp. 288-291
Author(s):  
R.S Chundawat ◽  
Patidar D.K ◽  
Haldar A ◽  
Meena K.C
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Block Design ◽  
Lepidium Sativum ◽  
Rabi Season ◽  
Seed Rate ◽  
Randomized Block Design ◽  
Lepidium Sativum L ◽  
Number Of Branches

The experiments were carried out during Rabi season for the three consecutive years of (2012 to 2014) at the Research Farm, College of Horticulture, Mandsaur (M.P.) under AICRP on M&AP, Rajmata Vijayaraje Scindia Krishi Vishwa Vidyalaya, Gwalior (M.P.). The treatments consisted of two sowing methods as M1- seed broad casting and M2- line sowing. Five seed rate S1- 6, S2-8, S3- 10, S4-12 and S5-15 kg/ha. These treatments were evaluated in Factorial Randomized Block Design with three replications. Significantly maximum plant height was recorded under treatment S5, maximum number of number of branches was recorded under treatment S2, maximum stem girth was recorded under treatment S2 and seed yield was recorded under treatment S2.

scholarly journals Effect of seed rate on linseed genotypes under utera condition

2021 ◽  
Vol 17 (2) ◽  
pp. 234-238
Author(s):  
J.R. Katore ◽  
Beena Nair ◽  
Shilpa Rananaware ◽  
Rupali Damdar ◽  
J.M. Parbat ◽  
...  
Keyword(s):  
Field Experiment ◽  
Seed Yield ◽  
Block Design ◽  
Growth Yield ◽  
Rabi Season ◽  
College Of Agriculture ◽  
Research Project ◽  
Yield Attributes ◽  
Seed Rate ◽  
Randomized Block Design

A field experiment was conducted under All India coordinated Research Project on linseed at Agriculture Farm, College of Agriculture, Nagpur in Rabi Season 2019-20. The experiment was laid out in Factorial Randomized Block Design with three replication in which effect of three seed rate i.e. 30, 40 and 50 Kg/ha was tested on three genotypes i.e. BRLS-106, Shekhar and T- 397. The results revealed that among the genotype BRLS -106 was found superior over Shekhar and T-397 genotypes under utera condition with respect to growth, yield and yield attributes. However, the seed rate 50 kg-1 found superior in yield, GMR and NMR. The interaction of BRLS-106 with seed rate 40kg/ha has recorded the highest seed yield and net monetary returns also.

scholarly journals Assessment of Genetic Diversity of Chickpea Genotypes (Cicer arietinum L.) Using D2 Statistics

2021 ◽  
pp. 51-56
Author(s):  
M. Karthikeyan ◽  
Sharad Pandey ◽  
Gideon Synrem ◽  
K. R. Saravanan
Keyword(s):  
Genetic Diversity ◽  
Plant Height ◽  
Cicer Arietinum ◽  
Seed Yield ◽  
Block Design ◽  
Rabi Season ◽  
Cicer Arietinum L ◽  
Quantitative Characters ◽  
Randomized Block Design ◽  
Cluster Distance

An experiment using twenty genotypes of chickpea (Cicer arietinum L.) was conducted during Rabi season of 2019-2020, to find the genetic diversity using D2 statistics. The experiment was laid out in randomized block design with three replications at the experimental field of Himgiri Zee University, Dehradun. The observations was recorded on  nine quantitative characters where five randomly selected plants were taken the average was computed while the traits days to 50 % flowering and days to 100 % maturity was taken from plot basis. Results revealed that the genotypes were grouped into 4 clusters where Cluster-I had fifteen genotypes and cluster II had three genotypes while one genotype each was present in cluster III and IV. The seed yield per plant contributed maximum towards genetic diversity (32.00 %) followed by plant height at maturity (14.00 %) and number of secondary branches (9.00 %). The maximum intra cluster distance was found in cluster II (164.691) indicating that the 15 genotypes including in the cluster II were most divergent. However, maximum inter cluster distance was noticed between cluster I and cluster II (313.247) which could be used in hybridizing program.

scholarly journals DETERMINATION OF SEED YIELD AND ITS SOME CHARACTERS OF SOME HUNGARIAN VETCH (VICIA PANNONICA CRANTZ.) GENOTYPES

2021 ◽  
Vol 10 (19) ◽  
pp. 401-406
Author(s):  
Hazım Serkan Tenikecier ◽  
Adnan Orak ◽  
Sude Deveci ◽  
Birol Gültekin
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Experimental Area ◽  
Randomized Block Design ◽  
Thousand Seed Weight ◽  
Number Of Seeds ◽  
Number Of Branches

The study was conducted between 2015-2017 at Tekirdağ Namık Kemal University, Agriculture Faculty, Field Crops Department, Research and Experimental Area and Atatürk Soil, Water and Agricultural Meteorology Research Institute Research and Experimental Area (Kırklareli) in randomized block design with three replications. Five Hungarian vetch genotypes (cv. Egebeyazı and cv. Sarıefe, 47.1, 47.2, 56.3 lines) were used as material. Plant height (cm), number of branches per plant (pcs), number of pods per plant (pcs), number of seeds per pod (pcs), thousand seed weight (g), seed yield (t ha-1) were determined. The characters which were determined in the study varied between; plant height 76.50-97.97 cm, number of branches per plant 3.87-5.08 pcs, number of pods per plant 17.20-24.35 pcs, number of seeds per pod 3.77-5.47 pcs, thousand seed weight 32.08-39.15 g, seed yield 0.70-1.08 t ha-1. According to seed yield results 56.3 and 47.2 genotypes can be grown for seed in Tekirdağ, Kırklareli and similar ecological conditions.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

scholarly journals COMBINING ABILITY STUDIES FOR GROWTH AND YIELD CHARACTERS OF BHENDI ABELMOSCHUS ESCULENTUS (L.) MOENCH)

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
S. Kalaiselvan ◽  
S. Anuja
Keyword(s):  
Plant Height ◽  
Combining Ability ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
F1 Hybrids ◽  
Randomized Block Design ◽  
Final Harvest ◽  
Weight Number ◽  
Number Of Branches

The present investigation consisted of 9 lines, 3 testers with their 27 F1 hybrids developed through line x tester mating fashion in randomized block design with three replications. Parents and hybrids differed significantly for gca and sca effects, respectively. Among the parents, maximum gca effect was found in EC 112241 and Aruna for inter node distance, EC 112241 and Arka Anamika for single fruit weight, EC 109454, EC 169344 and Arka Anamika for number of branches per plant, EC 169331 and Arka Anamika for number of fruits per plant, EC 109454 and Aruna for plant height at final harvest. The crosses exhibited maximum positive significant sca effect was observed in EC 112241 x Aruna, EC 109454 x Kashi Kranti and EC 112264 x Aruna were found as good specific combiners for single fruit weight, number of branches per plant and number of fruits per plant respectively. The hybrid EC 112264 x Aruna exhibited maximum significant negative sca effects for inter node distance and plant height at final harvest.

Effect of various plant density at different levels of phosphorous and potash on growth and seed yield of onion (Allium cepa L.) cv. Hisar-2

2017 ◽  
Vol 51 (05) ◽  
Author(s):  
Naval Kishor Kamboj ◽  
V. K. Batra ◽  
Navjot Singh Brar ◽  
M. K. Rana ◽  
Tanuj .
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Block Design ◽  
Recommended Dose ◽  
Plant Spacing ◽  
Rabi Season ◽  
Flower Stalk ◽  
Randomized Block Design ◽  
Allium Cepa L ◽  
Different Levels

A field experiment was carried out at Research Farm of the Department of Vegetable Science, CCS Haryana Agricultural University, Hisar (Haryana) during rabi season of 2013-14 and 2014-15 to investigate the effect of fertilizers and plant spacing on growth and seed yield of onion. The treatments comprising of three fertilizers levels (F1: 75% recommended dose of phosphorous and potash, F2: 100% recommended dose of phosphorous and potash and F3: 125% recommended dose of phosphorous and potash) and four plant spacing (S1: 45x30 cm, S2: 45x45 cm, S3:60x30 cm and S4: 60x45 cm) were laid out in randomized block design (factorial). The results of the experiment showed that different fertilizers levels and plant spacing influenced the growth and seed yield of onion significantly. The crop planted at 60x45 cm spacing and supplied with 125% recommended dose of phosphorous and potash resulted in maximum number of umbels per plant and number of seeds per umbel, while the crop planted at 45x30 cm spacing and supplied with 125% recommended dose of phosphorous and potash resulted in highest length of leaves, length of flower stalk and seed yield per hectare during both the years.

Heterosis, inbreeding depression and their relationship with genetic divergence in sesame ( Sesamum indicum L.)

2010 ◽  
Vol 58 (3) ◽  
pp. 313-321 ◽  
Author(s):  
P. Banerjee ◽  
P. Kole
Keyword(s):  
Plant Height ◽  
Inbreeding Depression ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Basic Material ◽  
Branch Number ◽  
Randomized Block Design ◽  
Component Traits ◽  
Pure Lines

Seven parents (CST2002, MT34, OS-Sel-2, TKG22, AAUDT9304-14-4, B67 and Rama), their 21 F 1 s and 21 F 2 s were grown in summer 2003 in a randomized block design with three replications. Heterosis and inbreeding depression were studied for seven important yield-contributing characters (plant height, branch number plant −1 , capsules plant −1 , seeds capsule −1 , 1000-seed weight, stick yield plant −1 and seed yield plant −1 ). Maximum heterosis for seed yield plant −1 over the mid- and better-parent was recorded in CST2002×TKG22 (43.30%) and MT34×B67 (27.22%), respectively. Mid-parent heterosis for seed yield plant −1 was due to cumulative heterosis for various important component traits, such as capsules plant −1 , seeds capsule −1 and 1000-seed weight. Inbreeding depression was highest for seed yield, followed by 1000-seed weight, capsules plant −1 , branch number and plant height, indicating the predominance of non-additive genetic effects. B67×Rama exhibited significant positive heterosis in F 1 , but non-significant inbreeding depression in F 2 for seed yield. This cross can be utilized as basic material for identifying better pure lines. The clustering pattern indicated that in general genetically diverse parents exhibited more heterosis, as evident in the majority of the crosses.

scholarly journals Inheritance of Some Quantitative Characters in Pigeonpeas (Cajanus cajan (L.) Mill sp.)

1969 ◽  
Vol 55 (1) ◽  
pp. 23-43
Author(s):  
Abad Morales Muñoz ◽  
Raúl Abrams
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Flowering Plant ◽  
Frequency Distributions ◽  
Flowering Date ◽  
Randomized Block Design ◽  
Genotypic And Phenotypic Correlations ◽  
High Heritability

Three varieties and an irradiation-derived line of pigeonpeas were used as parents in five crosses as follows: P.I. 5690 X Kaki, P.I. 5690 X Saragateado, P.I. 5690 X 526, Kald X 526, and Saragateado X 526. The F2, F3 and parents of each cross were planted in the field at the Isabela Substation during 1966-67 in a randomized block design with three replicates. Genotypic variability was studied and genotypic and phenotypic correlations were calculated for all the crosses in the F2 and F3 generations. Genetic coefficients of variation and heritability estimates were computed for four traits in five crosses and for six traits in one particular cross. Frequency distributions are shown for date of flowering, plant height, and seed weight. There was much greater variation for all crosses, in general, in seed weight, plant height, and flowering date than in number of seeds per pod. With the exception of number of pods per plant the correlations between seed yield and other traits were not great enough to provide reliable indications for yield. The phenotypic and genotypic correlations between seed yield and number of pods per plant were high, above 0.90. However, their low heritability, 45.3 and 52.1 percent in F2 and F3 generations, tends to indicate that not too much progress could be expected for seed yield improvement by selecting for large number of pods per plant. Good progress by selection could be made by breeders in traits such as flowering date, plant height, and seed weight which showed high heritability values.

scholarly journals PENGARUH JARAK TANAM DAN MULSA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN TOMAT (Lycopersicon esculentum Mill) PADA MUSIM PENGHUJAN

2018 ◽  
Vol 11 (2) ◽  
pp. 1-9
Author(s):  
Amelia Nur Suprianto ◽  
Tri Kurniastuti
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Plastic Mulch ◽  
Tomato Plants ◽  
Straw Mulch ◽  
Randomized Block Design ◽  
Number Of Branches

This research aims 1) To determine the effect of interaction of different plant spacing and the provision of mulch to growth and yield of tomato plants. 2) To know the different spacing affect the growth and yield of tomato plants. 3) To know the use of mulch type effect on growth and yield of tomato plants. This research was conducted by using Randomized Block Design in Factorial (RAK) with 2 factors, first factor is plant spacing (J) consisting of 3 levels ie 40x30 cm (J1), 40x50 cm (J2), 40x70 cm (J3) . The second factor is mulch (M) consisting of 3 levels ie: without mulch (M0 / control), straw mulch (M1), plastic mulch (M2). The variables observed were plant height, number of branches, number of bunches, number of fruit, and fruit weight. Data were analyzed by using variance analysis (Anova), 5% level. The results showed that: There was no interaction between plant spacing and mulch on growth and yield of tomato plants. Treatment spacing 40x50 (J2) effect on the number of bunches of 35 HST, the weight of the first harvest fruit and total fruit weight. The use of straw mulch type (M1) has an effect on plant height, number of branches, number of 35 HST bunches, and total fruit weight.

scholarly journals STUDIES ON HETEROSIS AND COMBINING ABILITY THROUGH DIALLEL METHOD IN MAIZE (ZEA MAYS L.)

2021 ◽  
Vol 21 (No 1) ◽  
Author(s):  
Mahipat Singh Yadav ◽  
B. Gangwar
Keyword(s):  
Zea Mays ◽  
Seed Yield ◽  
Combining Ability ◽  
Yield Components ◽  
Zea Mays L ◽  
Growth Parameters ◽  
Block Design ◽  
Rabi Season ◽  
Yield Attributes ◽  
Randomized Block Design

The present investigation was conducted using 28 different genotypes (seven parents and their 21 F1s) of maize under organic conditions at the Rain-fed Organic Research Farm, Narayanbag, Institute of Agricultural Sciences, Bundelkhand University, Jhansi (U.P.) India, during kharif 2018 and rabi season 2018-19. In order to determine the general and specific combining ability of parents and the crosses, the growth parameters and yield components were evaluated in a 7×7 diallel fashion in maize in a Randomized Block Design (RBD) with three replications. In this study, the GCA effects suggested that parent P1, P2 and P4 were the most desirable as they possessed high GCA effect for most of the characters. Among F1 crosses, P4 x P3, P3 x P1, P5 x P3 and P7 x P5 having significant positive SCA were found to be desirable for yield and yield attributing characters. The maximum heterotic effects in desirable direction for yield attributes were showed by the cross combinations viz; P1 x P6, P2 x P7, P2 x P5, P1 x P2, P3 x P4, P5 x P7 and P3 x P5. The maximum heterosis was recorded in for Seed yield per plant P5 x P7 (39.32%) which ranged from -14.69 to 49.55.

Sign in / Sign up

Export Citation Format

Share Document