The numerical solution of dynamic response of SDOF systems using cubic B-spline polynomial functions

2011 ◽  
Vol 38 (2) ◽  
pp. 211-229 ◽  
Author(s):  
S. Shojaee ◽  
S. Rostami ◽  
A. Moeinadini
Keyword(s):  
Dynamic Response ◽  
Numerical Solution ◽  
Polynomial Functions ◽  
B Spline ◽  
Spline Polynomial

Optimum Design of Journal Bearings Dimensions for Rotating Machines

2020 ◽  
Vol 38 (10A) ◽  
pp. 1481-1488
Author(s):  
Tariq M. Hammza ◽  
Ehab N. Abas ◽  
Nassear R. Hmoad
Keyword(s):  
Aspect Ratio ◽  
Dynamic Response ◽  
Numerical Solution ◽  
Critical Speed ◽  
Design Method ◽  
Considerable Effect ◽  
Journal Bearings ◽  
Rotating Machines ◽  
Bearing Clearance ◽  
Study Results

The values of Many parameters which involve in the design of fluid film journal bearings mainly depend on the bearing applied load when using the conventional design method to design the journal bearings, in this study, as well as applied bearing load, the dynamic response and critical speed have been used to calculate the dimensions of journal bearings. In the field of rotating machine, especially a heavy-duty rotating machines, the critical speed and response are the main parameters that specify bearing dimensions. The bearing aspect ratio (bearing length to bore diameter) and bearing clearance have been determined based on rotor maximum critical speed and minimum response displacement. The analytical solution of rotor Eq. of motion was verified by numerical solution via using ANSYS Mechanical APDL 18.0 and by comparing the numerical solution with the preceding study. The final study results clearly showed that the bearing aspect ratio has little effect on the critical speed, but it has a high effect on the dynamic response also the bearing clearance has little effect on the critical speed and considerable effect on the dynamic response. The study showed that the more accurate values of bearing aspect ratio to make the response of rotor as low as possible are about 0.65 - 1 and bearing percent clearance is about 0.15 - 0.2 for different rotor dimensions.

scholarly journals Numerical Solution of Nonlinear Schrödinger Equation with Neumann Boundary Conditions Using Quintic B-Spline Galerkin Method

Symmetry ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 469 ◽  
Author(s):  
Azhar Iqbal ◽  
Nur Nadiah Abd Hamid ◽  
Ahmad Izani Md. Ismail
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Conditions ◽  
Numerical Solution ◽  
Neumann Boundary ◽  
Neumann Boundary Conditions ◽  
Spline Method ◽  
Galerkin Finite Element Method ◽  
Galerkin Finite Element ◽  
B Spline

This paper is concerned with the numerical solution of the nonlinear Schrödinger (NLS) equation with Neumann boundary conditions by quintic B-spline Galerkin finite element method as the shape and weight functions over the finite domain. The Galerkin B-spline method is more efficient and simpler than the general Galerkin finite element method. For the Galerkin B-spline method, the Crank Nicolson and finite difference schemes are applied for nodal parameters and for time integration. Two numerical problems are discussed to demonstrate the accuracy and feasibility of the proposed method. The error norms L 2 , L ∞ and conservation laws I 1 ,   I 2 are calculated to check the accuracy and feasibility of the method. The results of the scheme are compared with previously obtained approximate solutions and are found to be in good agreement.

Sign in / Sign up

Export Citation Format

Share Document