Heat Transfer Augmentation through the Control of Turbulent Flow Structure

1990 ◽  
Vol 93 (864) ◽  
pp. 908-909
Author(s):  
Kenjiro SUZUKI
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Flow Structure ◽  
Heat Transfer Augmentation ◽  
Turbulent Flow Structure

Turbulent flow structure and heat transfer in an inclined bubbly flow. Experimental and numerical investigation

2017 ◽  
Vol 52 (1) ◽  
pp. 115-127 ◽  
Author(s):  
A. E. Gorelikova ◽  
O. N. Kashinskii ◽  
M. A. Pakhomov ◽  
V. V. Randin ◽  
V. I. Terekhov ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Numerical Investigation ◽  
Flow Structure ◽  
Bubbly Flow ◽  
Turbulent Flow Structure

Heat Transfer and Turbulent Flow Structure in Channels With Miniature V-Shaped Rib-Dimple Hybrid Structures on One Wall

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Peng Zhang ◽  
Yu Rao ◽  
Yanlin Li ◽  
Bernhard Weigand
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Secondary Flow ◽  
Flow Structure ◽  
Pressure Loss ◽  
Numerical Study ◽  
Hybrid Structures ◽  
Numerical Computations ◽  
Turbulent Flow Structure ◽  
Near Wall

An experimental and numerical study has been conducted on heat transfer and turbulent flow structure in channels with novel hybrid structures with miniature V-shaped ribs and dimples on one wall. One miniature V-shaped rib was arranged immediately upstream each individual dimple to form the hybrid structure, which aims at inducing additional near-wall secondary flow interacting with the dimple vortex flow and further improving the heat transfer. Steady-state convective heat transfer experiments were done to obtain the heat transfer and pressure loss of the turbulent flow over the surfaces with the miniature V rib-dimples for the Reynolds numbers from 18,700 to 60,000. In addition, the turbulent flow structure in the V rib-dimpled channels has been predicted by carrying out numerical computations. The experimental results indicated that the overall heat transfer enhancement of the miniature V rib-dimpled channels can be increased by up to about 60.0% compared with the counterpart of the dimpled only channel, and by about 23.0% compared with the counterpart of the miniature V ribbed only channel. The miniature V ribs showed appreciable effects on the heat transfer and pressure loss characteristics for the turbulent flow over the V rib-dimpled surfaces. The numerical computations showed that the miniature V rib upstream each dimple produced strong near-wall downwashing secondary flow, which significantly changed the flow patterns and intensified the turbulent flow mixing inside and outside the dimple and above the surrounding wall. These unique near-wall flow characteristics generated a significant heat transfer improvement in both the magnitude and the uniformity.

scholarly journals Turbulent flow structure at a 90-degree open channel confluence: Accounting for the distortion of the shear layer

2016 ◽  
Vol 12 ◽  
pp. 130-147 ◽  
Author(s):  
Saiyu Yuan ◽  
Hongwu Tang ◽  
Yang Xiao ◽  
Xuehan Qiu ◽  
Huiming Zhang ◽  
...  
Keyword(s):  
Turbulent Flow ◽  
Shear Layer ◽  
Flow Structure ◽  
Open Channel ◽  
Turbulent Flow Structure ◽  
Channel Confluence

Investigation of Coriolis Forces Effect of Flow Structure and Heat Transfer Distribution in a Rotating Dimpled Channel

2011 ◽  
Vol 134 (3) ◽  
Author(s):  
Mohammad A. Elyyan ◽  
Danesh K. Tafti
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Recirculation Zone ◽  
Channel Height ◽  
Coriolis Forces ◽  
Flow Recirculation ◽  
Heat Transfer Augmentation ◽  
Wide Range ◽  
Large Eddy ◽  
Dimple Surface

Large-eddy simulations are used to investigate Coriolis forces effect on flow structure and heat transfer in a rotating dimpled channel. Two geometries with two dimple depths are considered, δ=0.2 and 0.3 of channel height, for a wide range of rotation number, Rob=0.0–0.70, based on mean bulk velocity and channel height. It is found that the turbulent flow is destabilized near the trailing side and stabilized near the leading side, with secondary flow structures generated in the channel under the effect of Coriolis forces. Higher heat transfer levels are obtained at the trailing surface of the channel, especially in regions of flow reattachment and boundary layer regeneration at the dimple surface. Coriolis forces showed a stronger effect on the flow structure for the shallow dimple geometry (δ=0.2) compared with the deeper dimple where the growth and shrinkage of the flow recirculation zone in the dimple cavity with rotation were more pronounced than the deep dimple geometry (δ=0.3). Under the action of rotation, heat transfer augmentation increased by 57% for δ=0.2 and by 70% for δ=0.3 on the trailing side and dropped by 50% for δ=0.2 and by 45% for δ=0.3 on the leading side from that of the stationary case.

Turbulent flow structure at a discordant river confluence: Asymmetric jet dynamics with implications for channel morphology

2017 ◽  
Vol 122 (6) ◽  
pp. 1278-1293 ◽  
Author(s):  
Alexander N. Sukhodolov ◽  
Julian Krick ◽  
Tatiana A. Sukhodolova ◽  
Zhengyang Cheng ◽  
Bruce L. Rhoads ◽  
...  
Keyword(s):  
Turbulent Flow ◽  
Flow Structure ◽  
Channel Morphology ◽  
River Confluence ◽  
Turbulent Flow Structure
Sign in / Sign up

Export Citation Format

Share Document