J024041 Computational study of mass transfer by blood flow in carotid arteries using patient-specific geometry

2011 ◽  
Vol 2011 (0) ◽  
pp. _J024041-1-_J024041-3
Author(s):  
Kengo KATAGIRI ◽  
Marie OHSHIMA ◽  
Sota YAMAMOTO
Author(s):  
Shigefumi Tokuda ◽  
Takeshi Unemura ◽  
Marie Oshima

Cerebrovascular disorder such as subarachnoid hemorrhage (SAH) is 3rd position of the cause of death in Japan [1]. Its initiation and growth are reported to depend on hemodynamic factors, particularly on wall shear stress or blood pressure induced by blood flow. In order to investigate the information on the hemodynamic quantities in the cerebral vascular system, the authors have been developing a computational tool using patient-specific modeling and numerical simulation [2]. In order to achieve an in vivo simulation of living organisms, it is important to apply appropriate physiological conditions such as physical properties, models, and boundary conditions. Generally, the numerical simulation using a patient-specific model is conducted for a localized region near the research target. Although the analysis region is only a part of the circulatory system, the simulation has to include the effects from the entire circulatory system. Many studies have carried out to derive the boundary conditions to model in vivo environment [3–5]. However, it is not easy to obtain the biological data of cerebral arteries due to head capsule.


Author(s):  
Guanglei Xiong ◽  
C. Alberto Figueroa ◽  
Nan Xiao ◽  
Charles A. Taylor

Previous efforts to simulate blood flow in patient-specific models either assumed rigid vessel walls or deformable walls with constant mechanical property [1]. We have developed a new workflow to enable blood flow and vessel dynamics simulations using subject-specific geometry and variable wall properties. The geometric model construction is based on 3D segmentation and geometric processing which greatly reduce human labor and increase the objectivity of the model. Variable wall properties are assigned to the model based on combining centerline-based and surface-based methods. This new approach was successfully applied to simulate blood flow and wall dynamics in models with abdominal, thoracic, and cerebral aneurysms.


2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Tomohiro Otani ◽  
Takuya Shindo ◽  
Satoshi Ii ◽  
Masayuki Hirata ◽  
Shigeo Wada

Aneurysm recurrence is the most critical concern following coil embolization of a cerebral aneurysm. Adequate packing density (PD) and coil uniformity are believed necessary to achieve sufficient flow stagnation, which decreases the risk of aneurysm recurrence. The effect of coil distribution on the extent of flow stagnation, however, especially in cases of dense packing (high PD), has received less attention. Thus, the cause of aneurysm recurrence despite dense packing is still an open question. The primary aim of this study is to evaluate the effect of local coil density on the extent of blood flow stagnation in densely coiled aneurysms. For this purpose, we developed a robust computational framework to determine blood flow using a Cartesian grid method, by which the complex fluid pathways in coiled aneurysms could be flexibly treated using an implicit function. This tool allowed us to conduct blood flow analyses in two patient-specific geometries with 50 coil distribution patterns in each aneurysm at clinically adequate PD. The results demonstrated that dense packing in the aneurysm may not necessarily block completely the inflow into the aneurysm and local flow that formed in the neck region, whose strength was inversely related to this local PD. This finding suggests that local coil density in the neck region still plays an important role in disturbing the remaining local flow, which possibly prevents thrombus formation in a whole aneurysm sac, increasing the risk of aneurysm regrowth and subsequent recurrence.


2019 ◽  
Vol 9 (4) ◽  
pp. 966-976
Author(s):  
Yousif A. Algabri ◽  
Omar Altwijri ◽  
Surapong Chatpun

Author(s):  
Ashish Das ◽  
William M. Gottliebson ◽  
Janaka Wansapura ◽  
Rupak K. Banerjee

Development of non-invasive diagnostic indices often requires accurate blood-flow calculation using physiologically realistic velocity profiles as boundary conditions. In this research, a methodology is being developed and validated that can directly use phase-contrast MR imaging (PC-MRI) based velocity measurement to perform blood-flow computation with patient-specific geometry. Using this methodology, the pressure drop can also be calculated non-invasively. Although the main focus of our research has been pulmonary insufficiency (PI) in tetralogy patients, our method can be employed in many other pathophysiologies. As a pilot study, the methodology is tested using a simple model of blood-flow through a straight artery of uniform cross-section.


2019 ◽  
Vol 19 (08) ◽  
pp. 1940054 ◽  
Author(s):  
SANG HYUK LEE ◽  
KAP-SOO HAN ◽  
NAHMKEON HUR ◽  
YOUNG I. CHO ◽  
SEUL-KI JEONG

Blood flow simulations can identify arterial regions that are vulnerable to atherosclerotic or thrombotic evolution. To accurately define vulnerable arterial regions, hemodynamic parameters such as arterial geometry, blood flow velocity and blood viscosity (BV) must be measured individually. However, previous numerical studies have largely employed either a single representative value or simply used a nonspecific curve of non-Newtonian characteristics of BV. This study aimed to evaluate whether various BV models could produce similar arterial wall shear stress (WSS) results. We performed a blood flow simulation in carotid arteries obtained from time-of-flight magnetic resonance (TOF MR) angiography using the hemodynamic characteristics of subjects via carotid duplex ultrasonography. The BV models were categorized into the following five types: patient-specific non-Newtonian BV (model 1), representative non-Newtonian BV based on the Carreau model (BV model 2), Newtonian BV measured at a specific shear rate of 300[Formula: see text][Formula: see text] (BV model 3), Newtonian BV obtained from a hematocrit-based equation (BV model 4) and a representative Newtonian BV of 4[Formula: see text]cP (BV model 5). In total, 20 carotid arteries from 20 healthy volunteers (mean age [Formula: see text] SD of [Formula: see text] years; 50% women) were examined. Compared with the mean values of carotid WSS in BV model 1 as the reference model, the other four models showed significant differences in both genders for all carotid segments. To obtain reliable physiological WSS results, patient-specific non-Newtonian BV should be carefully employed.


Author(s):  
Hao Gao ◽  
Quan Long ◽  
Martin Graves ◽  
Zhi-Yong Li ◽  
Jonathan H. Gillard

Atherosclerotic plaque rupture has been extensively considered as the leading cause of death in western countries. It is believed that high stresses within plaque can be an important factor on triggering the rupture of the plaque. Stress analysis in the coronary and carotid arteries with plaque have been developed by many researchers from 2D to 3-D models, from structure analysis only to the Fluid-Structure Interaction (FSI) models[1].


Sign in / Sign up

Export Citation Format

Share Document