804 Mechanical Properties of Nano Particle Incorporated Unsaturated Polyester Resin

2012 ◽  
Vol 2012.20 (0) ◽  
pp. _804-1_-_804-5_
Author(s):  
Jun KITAGAWA ◽  
Satoshi KOBAYASHI
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Unsaturated Polyester Resin ◽  
Nano Particle

Physical and mechanical properties of unsaturated polyester resin matrix from recycled PET (based PG ) with corn straw fiber

2021 ◽  
pp. 51305
Author(s):  
Nora Abigail Wilson García ◽  
Jorge Luis Almaral Sánchez ◽  
Ramón Álvaro Vargas Ortiz ◽  
Abel Hurtado Macías ◽  
Nelly Flores Ramírez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Physical And Mechanical Properties ◽  
Unsaturated Polyester Resin ◽  
Resin Matrix ◽  
Corn Straw ◽  
Recycled Pet

Fabrication and Characterization of E-Glass Fiber Reinforced Unsaturated Polyester Resin Based Composite Materials

2019 ◽  
Vol 24 ◽  
pp. 1-7
Author(s):  
Md. Naimul Islam ◽  
Harun Ar-Rashid ◽  
Farhana Islam ◽  
Nanda Karmaker ◽  
Farjana A. Koly ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Bending Strength ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Glass Fibers ◽  
Tensile Modulus ◽  
Unsaturated Polyester Resin ◽  
Fiber Reinforced ◽  
Bending Modulus

E-glass fiber mat reinforced Unsaturated Polyester Resin (UPR)-based composites were fabricated by conventional hand lay-up technique. The fiber content was varied from 5 to 50% by weight. Mechanical properties (tensile and bending) of the fabricated composites were investigated. The tensile strength (TS) of the 5% and 50% fiber reinforced composites was 32 MPa and 72 MPa, respectively. Similarly, tensile modulus, bending strength and bending modulus of the composites were increased by the increase of fiber loading. Interfacial properties of the composites were investigated by scanning electron microscopy (SEM) and the results revealed that the interfacial bond between fiber and matrix was excellent. Keywords: Unsaturated Polyester Resin, Mechanical Properties, E-glass Fibers, Composites, Polymer.

Preparation and Characterization of Polypropylene and Unsaturated Polyester Resin Filled with Jute Fiber

2019 ◽  
Vol 1156 ◽  
pp. 60-68 ◽  
Author(s):  
Kamrun N. Keya ◽  
Nasrin A. Kona ◽  
Md. Sahadat Hossain ◽  
Md. Razzak ◽  
Md. Naimul Islam ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Natural Fiber ◽  
Unsaturated Polyester ◽  
Tensile Modulus ◽  
Unsaturated Polyester Resin ◽  
Matrix Composites ◽  
Jute Fabrics ◽  
Commercial Applications

Jute fabrics reinforced Polypropylene (PP) matrix composite was fabricated by compression molding and Unsaturated Polyester Resin (UPR) matrix composites were also fabricated by hand lay-up technique. The fiber content of the composites was 40% by weight. Mechanical properties between two types of composites were compared. Tensile Strength (TS), Tensile Modulus (TM), Elongation at break (Eb%) , and Impact Strength (IS) of the jute fabrics/PP composites were found to be 47 MPa, 1.2 GPa, 13% and 8 kg/cm, respectively. On the other hand, TS, TM, Eb%, and IS of the jute fabrics/UPR composite were found to be 43 MPa, 1.3 GPa, 10% and 6 kg/cm, respectively. It was found that both composites showed almost similar mechanical properties. After tensile testing, fracture sides of both types of the composites were studied by Scanning Electron Microscope (SEM) and the results revealed poor fiber matrix adhesion for jute fabrics with PP and UPR. The fabricated composites became partly biodegradable because of jute (natural fiber) and mechanical properties of both types of composites showed promising results for commercial applications.

Sign in / Sign up

Export Citation Format

Share Document