Vapor Film Collapse Behavior during Quenching of Small Platinum Sphere into Polymer Aqueous Solution

2020 ◽  
Vol 2020.69 (0) ◽  
pp. 605
Author(s):  
SHIMAOKA Mitsuyoshi ◽  
YOSHIDA Hiroshi ◽  
IKUTA Fumiaki ◽  
IKEDA Nobuhiro ◽  
NAKAMURA Shigeto
Author(s):  
Yutaka Abe ◽  
Hideki Nariai

During severe accident of a light water reactor, various thermal hydraulic phenomena including vapor explosion could threaten the integrity of the containment vessel. Thermal detonation model is proposed to describe the vapor explosion. According to the model, several processes should be sequentially satisfied for the trigger phenomena of the vapor explosion. One of the most important processes for the trigger phenomena is the vapor film collapse around high temperature molten material droplets. In the present study, the vapor film collapse behavior around high temperature solid particle submerged into water was experimentally investigated by attacking a pressure pulse to the vapor film on a high temperature sold particle. The interfacial phenomena between vapor and water were measure by using a high-speed video camera of the maximum speed of 40,500 fps. The visual data obtained were processed with visual data processing techniques. That is, the average vapor film thickness was estimated, dynamic behaviors of the interfaces were analyzed with PIV technique and the interface movement was estimated with the digital auto correlation techniques from the visual data obtained. Furthermore, the transients of the temperature and pressure were simultaneously measured. The interfacial temperatures between vapor and water, and between molted liquid and water are analytically estimated by solving the heat conduction equation with the data obtained as the boundary conditions. It is clarified that vapor collapse by pressure pulse occurs homogeneously around the vapor film surface on a high temperature particle. Microscopic information are obtained from the visual data by using visual data processing technique, PIV technique and digital auto-correlation technique. At the time the vapor film surface changes to white, the saturation temperature exceeds the interfacial temperature. The microscopic vapor film collapse behavior indicates the possibility of the phase change at the vapor film collapse.


2003 ◽  
Vol 17 (01n02) ◽  
pp. 189-192
Author(s):  
DAISUKE TOCHIO ◽  
YUTAKA ABE ◽  
YOSUKE MATSUKUMA ◽  
HIDEKI NARIAI

In order to clarify the dominant driving force of complex vapor film collapse behavior, numerical simulation is performed with three-dimensional fifteen-velocity lattice gas automata method. As the result, numerical result is qualitatively different from the experimental result. On the other hand, numerical simulation of vapor film collapse behavior is performed with three-dimensional fifteen-velocity lattice gas automata method including phase-change effect. As the result, numerical result is qualitatively similar to the experimental results. Comparison between the experimental result and the numerical result confirms that experimentally observed vapor film collapse behavior is dominated not by fluid motion but by phase change.


Biomaterials ◽  
1999 ◽  
Vol 20 (16) ◽  
pp. 1501-1511 ◽  
Author(s):  
Emma F. Murphy ◽  
Joseph L. Keddie ◽  
Jian R. Lu ◽  
Jason Brewer ◽  
Jeremy Russell

2000 ◽  
Vol 2000 (0) ◽  
pp. 183-184
Author(s):  
Yutaka ABE ◽  
Hiroshi YANAGIDA ◽  
Hideki NARIAI ◽  
Miki YAGITA

Heliyon ◽  
2019 ◽  
Vol 5 (9) ◽  
pp. e02421 ◽  
Author(s):  
Min Kwan Kang ◽  
Eun Jung Cha ◽  
Hyun Hoon Song ◽  
Yang Ho Na

Author(s):  
Weihua Cai ◽  
Yongyao Li ◽  
Yue Wang ◽  
Xin Zheng ◽  
Mengsheng Zhu

In this paper, we propose a new fluid: drag-reducing-fluid-based nanofluids (DRFBN), i.e., nanoparticles are added into polymer aqueous solution. In order to investigate the flow and heat transfer characteristics of this new fluid, the Reynolds stress turbulence model and equivalent viscosity model are used in the simulations. Wall shear stress and Nusselt number (Nu) are chosen to represent the effects of drag reduction and heat enhancement respectively. The numerical studies mainly focus on the effects of different parameters on wall shear stress and Nu. The results show that comparison with water flow, DRFBN flow still has remarkable drag-reducing effect; comparison with polymer aqueous solution flow, DRFBN flow has some improvement on heat transfer. Therefore, DRFBN has duel effects: drag reduction and heat transfer enhancement. Besides, it is found that the parameters of nanoparticle volume fraction, Reynolds number and drag-reducing parameter have remarkable effects on wall shear stress and Nu of DRFBN flow.


Sign in / Sign up

Export Citation Format

Share Document